E-tender/Eng/EQ-95/24-25

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] Average run 6 mtr

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug ket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with ndicator & 16A kit-kat flush type fuse (Brand apprd by) EIC) on sheet metal switch board embedded in wall incl. S &F 240x200x65mm MS (16SWG) switch board and bakelite top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover & making necy conn

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl.necy fittings as required 2X22?0.3(1.5sq.mm)+1x22/0.3(1.5sq.mm) ECC

2X56/0.3(4Sqmm)+1x36/0.3(2.5sq.mm)ECC

2x84/0.3(6sq.mm)+1x56?0.3( 4sq.mm ECC

2x36/0.3(2.5sq.mm)+1x22/0.3(1.5sq.mm)ECC

. Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(L&T/Siemens) 160A incl.Supplying and fixing sheet steel (16SWG) cable end box on TPN SFU enclosure with nuts bolts etc incl. powder coated painting.

Inter connection between busbar to SFU incoming by HRFR PVC insulated flexible unsheathed copper conductor of follow- ing cross section. 70 sq,mm

DISTRIBUTION SYSTEM WITH TRAY Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. required of the following size. Incl. Al painting of MS support With 25x25x3mm angle iron support 300x 50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray bend with perforation notmore than 17.5% suspended from ceiling with two nos. suspenders& 25x25x3mm angle iron for supporting the cross member incl. S&FGI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.300x50x1.25mm (18SWG)

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Enclosure(607914)Legrand upto 160A 8Way incl Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection Legrand 160A FP ...1No & Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionLegrand 63A TP 6nos

TMC 501P 2xT -LED Incl.mounting rail for TLED Lamps (Philips)

TLED Essential tube 1200mm..1600 Lumen 20w(Philips)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length

Lowering & refixing of existing ceiling fan complete with bladescanopy,fork,rubber bush etc.incl making necy connection & disconn.as reqd

Thorough overhauling & servicing of existing defunct exhaust &ceilingfans incl.S&F ecy.ball bearing,bush,split pin,greasefor proper lubrication.

Dismantle of existing dilipated wiring,fitting fixture etc of total area if requred (as per unskilled labour rate WB)

Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

ELECTRO EQUIPMENTS TRADING CORPORATION

MUKHERJEE ENTERPRISE

KUNDU ELECTRICALS

NEW ERA ENTERPRISE