REPAIRS TO JOINERY, TOILETS, INTERNAL WATER SUPPLY, FLOORS, PLASTER ETC AND OTHER CONNECTED B/R WORKS IN OTM ACCN AT TECHNICAL AREA AT AIR FORCE STATION UDHAMPUR

Amount

Taking down shutters of any description exc. 1.00 Sqm and n exc. 2.00 Sqm each, complete all as specified.

Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm, complete all as specified.

Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified.

M&L for Pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified.

M&L for Pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L in repair MS helical door spring 150 mm ordinary springs pattern including roller and roller plate complete with welding etc and making good the disturbed portion and finishing as per the adjacent surfaces etc complete all as specified.

S&F Floor door stopper of 140mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified.

S&F 30mm thick flush shutter solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified.

M &L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying 02 coats of synthetic enemel paint over incl one coat of primer complete all as specified.

S&F 35mm thick 2nd class hard wood Plain framed shutter (One/two panel) with lock rail and panel of 9mm BWP ccommerial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm thick 2nd class hard wood Glazed and Skelton Shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

S&F Factory made Solid Panel PVC Door Shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at site complete all as specified.

M&L in repairs for Sheet Glass, 3.00mm thick glazing with Beads or Oil Putty, not exc. 0.5 Sqm in Each Pane, complete all as specified and as directed.

Ditto all as per item No 15 above but 4.00 mm Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed.

M&L for Factory made Steel Window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm including grill using 10Sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter of ERW section 50mm x 20mm and 1.0mm thick with two openable leafs having two Nos sash bar of T Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to frame shutter complete all as specified and as directed:- (a) Hold Fast, 150mm long of Flat Iron 12mm x 3mm made to shape 04 Nos per window . (b) Handle of Z-Section 20mm x 25mm, 100mm Long 01 No per Leaf . (c) MS Tower bolt 150mm long - 02No per leaf . (d) Z-section 20mm x 25mm, 100mm Long Stopper 1 No per Leaf . (e) Cleat 55mm Long of Hollow Square 15mm x 20mm x 63mm welded to Hinge 01 No per Leaf . (f) MS Pintal hinges of size 75mm x 12mm 02 Nos per Leaf including Stainless Steel Wire Cloth, 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 02mm & fixed with aluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete and incl taking down the existing old windows.

M&L for Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F in repair 100mm long Butt Hinges Medium Weight, Cold Rolled Mild steel and fixed complete all as specified and as directed.

S&F 100mm long Butt Hinges extruded aluminium alloy with Galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed.

S&F in repairs 150mm long Extruded aluminium alloy Handles, fabricated type, anodisedcomplete all as specified and as directed.

S&F 150mm long Extruded aluminium alloy Handles, fabricated type, anodised complete all as specified and as directed.

S&F in repairs 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and as directed.

S&F 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and as directed.

S&F in repairs 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F in repair 100mm long Aluminium anodised Hasp and staple incl bolt to hinge plate and fixed with screws, complete all as specified and as directed.

S&F for galvanised stainless steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified.

S&F in repair galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staple complete all as specified.

Demolition of cement concrete (unreinforced)(alongwith floor tiles/Paver Block/Chequered tiles etc) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding(but not backing) removing serviceable tiles to store,if any, or rubbish off the premises.

M & L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) 25mm thickness as in floor for laying tiles brushing with neat cement slurry @ 3.00 Kg/Sqm complete all as specified and as directed.

M&L for Outdoor Floor tiles of size 300x300mm thickness not less than 10mm set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed.

M&L for Non-skid Coloured Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and as directed.

M&L for coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and as directed.

M & L for Glazed coloured ceramic tiles in vertical surface 450x300x7 mm/350x 250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thk screed bed in CM 1:3, complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified.

M&L brick work with sub class B bricks straight or curved on plan exc 6m redius in CM 1:6 complete all as specified and as directed.

ditto as per ser item No 38 but except bricks

M&L brick work with sub class B bricks straight or curved on plan to any radious in half brick thick built in CM 1:4, complete all as specified and as directed.

Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and as directed.(Note: Height of the work upto 20.00 m)

M&L for rendering 15 mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and as directed.(Note: Height of the work upto 20.00 m)

M & L for Rendering 15mm thick in cement mortar 1:4 on other than fair faces of Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed. (Note: Height of the work upto 20.00 m)

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed.

M & L for two coats of acrylic exterior emulsion paint in camauflage pattern over acoat of primer incl preparation of new plastered surfaces complete Note : Height of the work upto 20m

M&L for two coats of Cement base paint on new plaster surfaces as per the existing surfaces including preparation of surfaces complete all as specified and as directed.(Note : Pattern of cement base paints to be match with existing surfaces surrounding areas.) Note : Height of the work upto 20m

M & L Preparing New Surfaces of Walls and applying two Oil Bond distemper incl 2 mm thick wall care putty complete all as specified and as directed. Note : Height of the work upto 20m

M & L for two coats of white wash on newly plaster surfaces of ceiling incl preparation of surfaces complete all as specified and as directed.

Supply only Integral Water Proofing compound, complete all as specified.

Disconnecting existing water tanks exc 250 & n.exc 500 Ltr capacity , setting aside (or lovering if required ) and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting and re-fixing in position all as specified and directed.

Taking up or down 15mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified .

S&F for steel water tubing of nominal bore 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

Taking up or down 20mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified .

M&L for steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

Taking down existing damaged IWC/EWC alongwith complete PCC and lime concrete from sunken floor and providing new IWC/EWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 grade hot bitumen @ 0.70Kg/Sqm over a coat of bituminous primer @ 0.5Kg / Sqm and then pasting of polythene film, 150 micron, natural colour with cold cut back adhesive. (iii) Fixing of 25mm dia GI pipe (medium grade) spout of length 45 cm. (iv) Filling sunken portion with PCC (1:4:8) type D2 using 40 mm graded aggregate after tesing of water tightness. .

S&F in repairs vitreous china wash down Water Closet white squatting pan Orissa pattern size 580x440mm with integral foot rest incl making necessary connections to soil pipes and flushing cistern complete all as specified and as directed.

S/F in repair Vitreous china wash down water closet Pan (pedestal Pattern) white colour (excluding fixing bolt, flushing cistern and flush pipe) size 580 x 440mm with integral foot rest connecting flushing cistern and flush pipe complete all as specified and as directed.

S&F in repair seat and cover for pedestal pan white / black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge devic, complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repair CP Seat jet with one meter PVC tube complete all as spfd and as directed.

S&F in repair Vitreous china Wash Hand Basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted/erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 , complete all as specified and as directed.

M&L for PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed.

S&F in repair angular Stop/Angle valve fancy type chromium plated,screwed down, high pressure with crutch or butterfly handle 15mm bore, complete all as specified and as directed.

S&F in repair Brass chromium plated WHB center hole single lever mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and as directed.

S&F in repair, Bib taps cast copper alloy 15mm bore, fancy type Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions, complete all as specified and as directed.

S&F Pillar cock 15mm bore fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed and fly-nuts screwed for iron pipe or brass ferrule and fixed in repair complet all as specified and as directed.

S&F in repair CP Towel Rail 600mm long fancy type fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed.

S&F in repair CP Grating doom 100mm dia complete all as specified and directed.

M&L for PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and as directed.

S&F PVC waste pipe 32/40mm dia for WHB complete all as specified and as directed in repairs.

M&L for providing 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregates as in floor/ sub-base.

Demolition of stone slabs and tiles of any description or thickness in floors,aprons laid dry

M& L sand filling under floors incl watering and consolidation complete all as specified and as directed.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment.

Providing cement concrete 1:2:4 type B0 in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles complete all as specified and directed.

S&F anodized aluminum powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for doors, window, ventilators, partition wall etc, with one or more rabates, shutters, inlcuding joining cleat for fixing etc. complete all as specified and as directed.

S&F anodized, powder coated aluminium doors shutters, (thickness of powder coating not less than 50 micron) aluminium section weighing exc 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing, handle 2 Nos in each door, fixed with floor hinges/ spring (measured separately), 4 lever brass mortice lock vertical type (1 No ), anodised aluminium snap beading screws etc complete all as specified and directed.

S&F anodized, powder coated aluminiumwindow and ventilator shutters hung type/sliding, (thickness of powder coating not less than 50 micron) aluminium section weighing exc 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing, handle in each shutter, including locking arragement anodised aluminium snap beading screws etc complete all as specified and directed.

S&F 5.5mm thick sheet tinted sheet glass fixed to doors and window all as specified and directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&Faluminium composite panel (ACP Sheet) 3-5mm thick both side laminated fixed in position side of partition complete as as spd and as directed.

M & L repairs to chhajja, projection, parapets etc at any height with cement plaster/PCC (1:2:4) incl providing reinforcing bars of 8 mm dia and formwork where required and making good the disturbed portion and finishing the surface with the similar painting material adjacent to the repaired portion.(Surface area to be measured for repaired portion) (Note: Work will be carried out up to a height of 20 m from GL).

M&L for dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as speified and directed.

S & F 5mm thick without PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed

S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as speified and directed.

Providing & fixing in repairs false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles with semi perforated 12 mm thick nicro tegular edged GRG false ceing tiles of size 595 x 595 mm of approved texture, designand patterns having moisture content less than 2%, humidity resistance of 99%,NRCO 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476(part 4)-1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on iterlocking metal T-Grid of hot dippped galvanised iron section of 0.33 mm thick(galvanised @120 grams per Sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000 mm, cross T of size 15 x 32 mm of length 600 mm to form grid module of size 600x 600 mm,suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners,6 mm dia fully threaded hangar rod upto 1000 mm length and L-shape level adjuster of size 85 x 25 x 2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws/ suspended from MS frame work complete all as specified.

Dismantling of AC (Corrugated, Semi Corrugated etc)/CGI or any type of sheets in roof covering complete.(Note: Work will be carried out up to a height of 22 m from GL).

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.(Note: Work will be carried out up to a height of 22 m from GL).

Pre-painted galvalume corrugated aluminum zinc coating GI based steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified(Note: Work will be carried out up to a height of 22 m from GL).

Dismantling wrought iron or mild steel work of any description not otherwise provided for at any height

Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if any

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from Concrete and making good disturbed ground complete.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified.(Fe 410 -W (Gde- E- 250) quality- AFe)

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)(Fe 410 -W (Gde- E- 250) quality- AFe) complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment.(Fe 410 -W (Gde- E- 250) quality- AFe) complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F in repairs Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F in repairs push type self closing angle valve Chromium plated complete

M & L in repairs MS medium grade pipe 50 mm bore fixed to walls

S&F in repairs Counter top Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe

Reinforced cement concrete 1:2:4, type B-1 ( using 20 mm graded crushed stone aggregate ) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like and mass complete all as specified and directed.

Formwork for rough finished surfaces of concrete (flat) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

S/F mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

M & L 18-20 mm thick granite(of any type) work (table rubbed and polished) in steps, jambs,pillars,window cills,cooking platforms and the like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite

M&L and taking down of existing unserviceable roof treatment materials and PCC / CM / Brick tiles padding etc from top of roof upto slab (complete depth) carefully by cutting chiseling, cleaning the surface by scraping brooming brushing etc and removing the rubbish from site exc. 500m but n exc 1.5km and applying roof treatment with the following specifications:- (a) Rendering 10mm thick in CM 1:3 with water proofing compound on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for for 07 days by ponding of water over the roof (Levelling course). (Note : Water proofing compound paid and measured separtely). (b) Applying evenly first coat cold bitumen primer confirming to IS-3384-1986 @ 0.40 Ltr per square metre on the cleaned plastered surfaces. (c) Applying evenly second coat of blown hot bitumen of grade 85/25 @ 1.20 kg per square metre (confirming to IS-702) on primed surfaces. (d) Applying third coat of APP modified membrane 3mm thick (minimum) and weight 3.60 Kg per square metre (reinforced) with polyster non woven fabric weighing not less than 150 gms per square metre by torch application. The overlap shall not be less than 100mm on the transverse direction and 75mm on longitudinal direction and sealing overlaps. Notes :- (i) Payment against this item shall not be allowed till completion of all the stages of work for any slab. (ii) The work shall be executed through well-trained applicators as per manufacturer's instructions after obtaining written approval from the GE (iii) Work will be carried out up to a height of 20 m from GL.

M & L in repairs 12 mm thick toughened glass in doors/partitions(with/without film as directed) fixed with steel connectors,top and bottom pivots including all types of locking arrangement, brass handles fancy type 300 mm long hole to hole incl hacking out old glass, complete

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in 15 mm pipe complete.

S&F in repairs Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) for 40 mm dia discharge pipe complete.

SHIVAE CONSTRUCTION

ANIKET TRADERS

PARAS RAM ASGOTRA AND SONS

TARUN BUILDERS

VISHWA MITTAR PACHYALA

RAMAN CONSTRUCTION CO

APARANA ENTERPRISES