REPAIR / MAINT OF DOUBLE LAYER CHAIN LINK FENCING AND GATES INCLUDING CERTAIN MISC B/R WORKS UNDER GE (AF) TECH AREA, AT AF STN AGRA

Amount

Demolition of cement concrete in ground floor and paving n.exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for boundary wall or fencing complete all as specified and as directed.

Dismantling structural steel work including doors, gates framed trusses etc. complete all as specified and as directed.

Dismantling of fencing, wire mesh etc of any size and description complete all as specified and as directed

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface in soft/loose soil complete all as specified and as directed

M&L for Providing cement concrete type D-2, 1:4:8 ( using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed

M&L for providing cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in foundation, filling, floors, pavings and mass concrete complete all as specified and as directed

M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron, equal angles, fillets and the likes (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (each line of wire to be measured)

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n. exc 5cm long , diameter of neck 5 to 10mm complete all as specified and as directed

Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engr-in-charge) complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

S&F in repair concertina coil 1050mm dia (in stretched position), hot dip galvanised stee wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18 SWG), fixed to the MS angle iron/precast RCC fencing post/Double layer between chain link fencings etc with and including binding wire complete all as specified and as directed

S&F Mild steel round bars 10mm dia and over as in strengthening bars for chain link fencing conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F mild steel framed work such as grills gratings / cattle trap etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified and as directed

S&F Steel work in trusses fabricated with rectangular / Square hollow section, including special shaped, washers etc including cutting welding, bending in shape etc using tube of YST 310 grade confirming to IS-4923 complete all as specified and as directed

S&F in repair bottom wheel made up of mild steel Fe 2062 of dia 300 mm dia, 45 mm thick including necessary cutting of surclip groove, bearing groove and boost groove including necessary hardening, nurling, fixing only roller bearings (qty 02 Nos) and other fittings etc all complete all as specifiede and as directed

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described for and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

M&L for preparation of new steel surfaces of any description n.exc 10 cm width or girth, not otherwise described for and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

Dismantiling of plain or corrugated steel sheeting any gauge, thickness of roof coverings complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed

S&F mild steel works as in wind ties with MS flats for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 upto any height of bldg complete all as specified and as directed

deva engineers

SAROJ CONSTRUCTIONS

C P Singh and Co

HARI BUILDERS

PATIRAM CONSTRUCTION

R K SINGH AND CO

B K Construction Company

Mohd Gulab Hussain