ADDN ALTN TO STORES IN BLDG NO T 23 DSM 53 DSM 41 DSM 42 AND DSM 43 OF 39 COY (SUP) A AND RENOVATION OF TOILETS FROM INDIAN COMMODE TO WESTERN COMMODE FOR 10 X ROOMS IN BLDG NO DSM 17 AND 03 X ROOMS IN BLDG NO DSM 28 AND RENOVATION OF KITCHEN IN BLD

Amount

Surface excavation in soft/loose soil `n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out

Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and as directed..

Demolition of brick work or soli concrete block masonary or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) n exc 1.5Sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5Sqm but n exc 4 sqm each complete all as specified and directed.

M&L for PCC (1:5:10) type E2 using 40mm graded crushed stone aggregate as in foundation , filling and mass concrete complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation , filling and mass concrete complete all as specified and directed.

M&L for RCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate as in labs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed

M&L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in surface channel and drain, complete all as specified and as directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, miltred/stopped ends etc. complete all as specified and as directed.

M&L for precast cement concrete block masonary with solid blocks, exc 10cm in width or girth, made out of PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate, and set in cement mortar (1:6) complete all as specified and directed.

M&L for precast cement concrete solid building blocks or slabs n exc 10cm thick (with plain or interlocking joints as directed made out of PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate complete in walls and set in CM 1:4 complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection layed in bays n exc 2m, finished even and smooth without using extra cement complete as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finsihed surface of concrete complete all as specified and directed.

M&L 2nd class hard wood in scantling, wrought, timber framed and fixed complete all as specified and directed.

Fixing only 2nd class hard wood in scantling, wrought, timber framed and fixed complete all as specified and directed. (NOTE: Serviceable timber scantling obtained from dismantling under Srl item No. 2 her-in-above shall be reused under this item)

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed.

S&F for 75mm Butt hinges, mild steel medium weight, cold rolled and fixed complete all as specified and directed

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 125mm long Aluminium handles, cast type, anodised and fixed complete all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, Width of flaps 30mm (when open) complete all as specified and directed.

S&F 125mm size hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 18/19mm thick block board, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.

S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with fixed in alumnium frame including rubber packing and aluminijum beading n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F for 3mm thick Figured glass, pin head type and glazing with fixed in alumnium frame/ oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 20mm dia harrison rails (curtain rails), anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and directed.

S&F brackets, aluminium anodised, for 20mm dia curtain rails complete all as specified and directed.

M&L for MS framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement screed/backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Ditto all as per Sl item No. 47 here-in-above but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for rolled mild steel in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required nexc 150sqcm complete all as specified and as directed. (NOTE: Work shall be measured per centimetre depth of cutting)

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including removal of rubbish from site of work complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 in two layers, first 10 mm thick base layer & finishing 5 mm thick with approved water proofing compound @ 3% by the weight of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately here-in-after.

Supply on integral water proofing compound.

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.

M&L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of acrylic distemper over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparation of old plastered surface or previously treated surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, alkali & fungal resistant, dirt resistant exterior paint of any shade as ordered (Company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed .

M&L Complete removal of existing treatment on wall and applying two finishing coat of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying two finishing coat of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.

M&L preparation of new steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 32mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Cutting chases, pinning in concrete block work making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. complete all as specified and directed.

S&F stainless steel drawer box 500mm of colour as approved with provn for double rail rolling system complete all as specified and directed.

S&F stainless steel single cutlery insert 500mm long complete all as specified and as directed.

S&F stainless steel carrousel 650 mm dia complete all as specified and directed.

S&F plain stainless steel basket of size 420x485x200mm complete all as specified and directed.

S&F plain stainless steel cup & saucer basket of size 520x585x100mm complete all as specified and directed.

S&F plain stainless steel perforated cutlery basket of size 470x485x100mm complete all as specified and directed.

S&F plain stainless steel grain trolley of size 525x485x350mm complete all as specified and directed.

S&F ball bearing drawer channel of size 600 mm long complete all as specified and as directed.

S&F stainless steel soft spring system complete all as specified and directed.

S&Fclip on cabinet hinge full overlay complete all as specified and directed.

S&F in repairs 15mm dia Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Brass CP 2-in-1 bib cock with flange complete all as specified and directed. ( Model No. Jaquar Cat Part No:- ORP-10041PM or equivalent in Marc/Hindware/Parryware)

S&F in repairs 15mm dia angular stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 125mm size chromium plated shower roses with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repairs chromium plated soap dish holder complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F tubular towel rail, brass chromium plated, 20mm dia, D type, 600mm long between flanges complete all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F 32mm dia low density polyethylene pipes of pressure rating 6 kgf/sq. cm complete all as specified and directed.

S&F in repairs Vitreous China EWC with P or S Trap, white, including seat cover, closed pattern with flat bottom and cover, MS CP hinging device, PVC flush bend pipe, PVC Flushing cistern 10 Ltr capacity, low level valve less , syphonic action type, White with inlet ball valve, float and handle, 32 mm dia PVC flush pipe, a pair of cast iron brackets duly painted / erecting stand, cutting and pinning in ends, making good disturbed surfaces in mement mortar 1:3 and including taking down unserviceable flushing cistern and connected Items complete as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and directed.

S & F 75mm bore sand cast iron soil, waste and vent pipe, in any length with or without ears with cement joint fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends, any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius with access doorcomplete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) reducer 110mm dia complete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylindrical vertical type with closed top) placing in positionand fixed including dismantling old unserviceable water tank complete all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed..

M&L for point wiring for one light/fan/exhaust fan point controlled by one, one way switch using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 1.5 sqmm nominal cross sectional area, 1100V grade, drawn in and including suitable size non metallic PVC casing caping with all necessary accessories, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 1.5 sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.

Ditto all as per item No.106 here-in-above but for one 5 Amp socket on same board with other switches complete all as specified and directed.

Ditto all as per item No.106 here-in-above but for one 5 Amp socket outlet on independent board complete all as specified and directed.

M&L for point wiring for one power point socket outlet, 15A on independent board using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 4 sqmm nominal cross sectional area, 1100V grade, drawn in and including suitable size non metallic PVC casing caping with all necessary accessories, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 4 sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 6 Amp, 230~250 volt , AC supply, ISI Marked complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type 230~250 volt , AC supply, ISI Marked complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 6A flush type 230~250 volt , AC supply, ISI Marked complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm, three terminals suitable for 230 Volts AC, 6 Amps complete all as specified and directed.

S&F LED light batten fitting 1x 20W, 220V, AC with driver, holder including LED tube light fixed to wall/ceiling with 02 Nos PVC block of suitable size and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking doown old unserviceable light fitting all as pecified and directed..

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220V AC, decorative type with driver holder and LED lamp including connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and directed.

S&F LED Lamp, 7 watt, B22, base colour, temp 6500K complete all as specified and directed

S&F LED building security light fitting 25 Watt 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed..

S&F MCB Distribution board, single pole and neutral ,12 ways, 240V double door, sheet steel enclosure powder coated with 100 Amps rated busbar with neutral link, fixed on wall duly grouted or on wooden board with all necessary electrical connections complete all as specified and directed.

S&F MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity, 'C' series complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps, 'C' series, 10KA, 240V and to be housed in DBs including necessary connection complete all as specified and directed.

S&F Exhaust fan, 250mm sweep, 230 volts, plastic body including making all necessary electric connection including cutting hole of required size on wall, fixing on & including wooden frame and making good disturbed surface of wall complete all as specified and as directed.

M&L for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including suitable size non metallic PVC casing capping including taking down unserviceable wiring complete all as specified and directed. (Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).

M&L for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including suitable size non metallic PVC casing capping including taking down unserviceable wiring complete all as specified and directed. (Note: two run of 6.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).

S & F LED Luminaries 600mm x 600mm, 36 watt, 220 V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as specified and directed

Supply, laying & testing of LT XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade and cross-sectional area 16Sqmm 2 Core complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.50 in depth for laying of underground cables/pipes etc. and getting out in soft/loose soil complete all as specified and directed.

Supply and laying dry river sand filling for cable protection with a layer of 8cm deep before laying cable and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note: Punned thickness shall be measured).

M&L for sub class 'B' bricks locally available best quality and laid dry, width wise across the line of cable in trenches for protection of underground cable complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and directed.

Removing excavated soils to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.complete all as specified and as directed.

M/s Chandan Kumar Thakur (BID ID -3122735)

RSC (BID ID -3125003)

M/S SAMAL CONSTRUCTION (BID ID -3125840)

shivam constructions (BID ID -3122710)

M/S MANOJ KUMAR BAL (BID ID -3125940)

M/S Surendra Prasad and Associates (BID ID -3126520)

S K Construction (BID ID -3125656)