Repairs to main Gate of Mechanical and Hospital Engineering Department Complex at Shalteng Srinagar

Amount

Repairs to Main MS Gate of M&HED complex at Shalteng Srinagar by way of:- a. Lifting/ demounting of damaged panel of main gate with the help of Hydra crane to be arranged by the firm. The job shall include dismantling by way of cutting the damaged parts/members of the gate followed by cleaning and finishing of the cuts using metal sharpener tool. (Non-SOR)

a. Replacement of damaged members of the panel by way of Providing and fitting of new MS members with following details: i. ISA65x65x6 -10 Meters @ 5.84 Kg/Mtr. = 58.4 Kgs ii. MS Strips 65x6mm – 7 m @ 3.1 Kg/mtr =21.7 Kgs iii. MS Flat 2.55mm thick – 2 Sqm @ 19.61 Kgs/Mtr = 39.22 Kgs iv. MS sheet 26gauge-0.5mm (for workshop shutter)- 4.4Sqm @3.92Kg/m2 =17 Kgs All the members of the frame shall be seam welded with each other through electric arc welding of adequate strength and consistency using “Adore” make welding electrodes followed by removing of burs and scales using metal sharpeners and steel wire brushes. The job includes remounting of the gate panel and shall ensure its proper match with the existing panel. The job also includes surface preparation of both the panels on both sides by way of scrapping and cleaning of surfaces using emery paper, kerosene oil/ thinner and cloth for making the surface smooth followed by applying of two coats of Primer of red oxide or a suitable Zinc Phosphate/Zinc Chromate Primer as anticorrosive treatment. (SOR 10.25.2)

Providing and fitting of hinges, L-drops and other locking arrangement as required for the main gate during execution.(Non-SOR)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. Painting on Main Gate on both sides and CGI shed of DG set with two coats of enamel paint of approved shade after ensuring complete dry condition of surfaces to be painted to give a smooth surface/shade approved brands and manufacture of required colour to give an even shade on old work (one or more coats). To avoid fibers take a little fresh material or thinner on the brush and make an even coating. (SOR 13.107)