Supply,Installation,Testing and Commissioning/Shifting /Modification for 33KV,11kV, LT Electrical Utilities of TPDDL and Dismantling /Relocation of Street lights infringing Delhi - Panipat - Karnal Namo Bharat corridor from Kashmiri Gate to Bhalswa

The Price bid shall be read in conjunction with the Bidding Documents.

Total Amount of Schedules (A+B-C+D) Exclusive GST.

The quantities for various items provided in the Price Bid are estimated quantities and are given to provide a common basis for Bidding. During the execution of works, the same may vary based upon "Good for Construction" (GFC) drawings approved by the Engineer and as per the site conditions. The basis of the payment will be the actual quantities of the work executed and accepted by the Engineer or quantities as per the GFC drawings whichever is less and shall be paid /valued as per the accepted rates.

Date: (DD/MM/YYYY)

Bidder may please note that to perform this contract. nothing extra shall be payable on account of field constraints, non-availability of uninterrupted front, cost of project management, monitoring, coordination and supervision, cost of adhering to quality requirements (QA/QC), cost of adhering to SHE requirements, cost of preparing drawings and documents, as-built records and documentation, preparation of detailed scheme for taking necessary clearance and approval from the concerned authority and other local bodies etc.

Income Tax and any other statutory taxes to be deducted at source will be deducted by the Employer from the due payments of the contractor in accordance with the prevailing rules in force.

Bidder should not tamper the Price Bid. If the Price Bid is found to be modified by the bidder, then the same will be treated as incomplete and non-responsive and may result in the rejection of the Bid.

(Any other DSR Items-DSR (E&M)-2025)

Errors will be corrected by the Employer for any arithmetic errors in computation or summation as per contract conditions.

Schedule-D [Any other DSR Items-DSR (E&M)-2025]

Method of Quoting the Price in the Price Bid The Price Bid is in Excel Format and the Quoting the Price in the Price Bid should be as Follows: (i) Whole Excel Worksheet is Locked except the Cells which are highlighted in Blue and white (for Lump Sum Schedule in BOQ1). (ii) Bidders are required to fill these cells which are highlighted in Blue and white (for total Schedule in BOQ1) only. (iii) Deleted (iv) The bidder is required to quote a flat percentage "Excess" (+) / "Less" (-) / "At par" with respect to the Total amount of the Schedule in the "BoQ1" Sheet. (v) All 'blanks' in the Pricing Document, where the Bidder is permitted to quote shall be filled in. (vi) If some % is quoted inspite of marking 'At par' that % will not be considered and it will be taken as "At par" on basic amount. Failure to quote the % in case of excess or less for the "Total amount of Schedule shall be treated as "At Par" and shall be evaluated accordingly. (vii) Bidder is required to quote Rates in INR only. (viii) Schedule C is credit/recoverable against dismantled items retrieved from site during shifting/modification of electrical utilities.

BoQ_Ver4.0

Bid No. DK/UD/COR-OF/09: Supply, Installation, Testing & Commissioning/Shifting / Modification for 33KV,11kV, LT Electrical Utilities of TPDDL and Dismantling / Relocation of Street lights infringing Delhi – Panipat - Karnal Namo Bharat corridor from Kashmiri Gate to Bhalswa (Ch. 9550 - 20770).

DK/UD/COR-OF/09

Name of the Bidder/ Bidding Firm / Company :

The total price of our Bid,below is:

We understand that you are not bound to accept the lowest evaluated bid or any other bid that you may receive.

Estimated Rate (Exclusive GST)

Erection, Testing & Commissioning of new/old lighting fixture on 6/7/8/9/12 Mtr GI octagonal pole including bracket arm, luminaries, accessories 3C 2.5 Sqmm wire etc complete as required.

Letter of Price Bid

Bid No.:

National Capital Region Transport Corportation Limited

GatiShakti Bhawan,INA, New Delhi- 110023

We have examined and have no reservations to the Bidding Documents, including Addenda issued in accordance with Instructions to Bidders (ITB) 8.

We understand that this bid, together with your written acceptance thereof included in your notification of award, shall constitute a binding contract between us, until a formal contract is prepared and executed.

Name of the authorized representative of the bidder

Name of the Bidder/ Bidding Firm / Company :

Desiganation of the authorized representative

Supply and providing warning tapes syitable for 66/33 kv of the following size thickness of the tape PVC=300 Micron wedith of warning tape = i50 mm

Supply of 33kV, 3CX400 Sq. mm power cable having stranded compacted Aluminium Conductor, screened, XLPE Insulated, extruded semiconducting compound, water swellable tape,Copper tape, extruded PVC inner sheathed, Galvanised Steel Round wire armoured bind by rubberized cotten tape and PVC outer sheathas per TPDDL specifications.

Supply of Heat Shrinkable Straight Through Joints with shear head bolt (Hexagonal shape) type mechanical connector for jointing of 33kV, 3CX400 SQ mm Aluminium Conductor XLPE Insulated screened and armoured Cables as per TPDDL specifications.

Supply of Heat Shrinkable Outdoor Terminations with Mechnical lug and possession UV & Fire retardant propoert for 33 kv ,3CX400 Sq mm Aluminium Conductor XLPE insulated screened and armoured cable as per TPDDL specifications

Supply of Heat Shrinkable Outdoor Terminations with crimping Al. Lug and possessing UV & Fire retardant property for 11kV Aluminium Conductor XLPE insulated screened and armoured cable of following sizes as per TPDDL specifications

Supply of Heat Shrinkable Indoor Terminations with crimping Al. Lug and possessing UV & Fire retardant property for 11kV Aluminium Conductor XLPE insulated screened and armoured cable of following sizes as per TPDDL specifications.

Supply of 11kV power cable having stranded compacted Aluminium Conductor, screened, XLPE Insulated, extruded semiconducting compound, water swellable tape,Copper tape, extruded PVC inner sheathed, Galvanised Steel Flat wire armoured bind by rubberized cotten tape and PVC outer sheath, of following sizes as per TPDDL specifications.

Supply of 1.1 kV (LT) power cable, having stranded compacted Aluminium Conductor, XLPE Insulated, Extruded PVC Inner sheath, Galvanised Steel Round Armoured and PVC outer sheathed, of following sizes as per TPDDL / TPDDL specifications.

Supply of Heat Shrinkable Straight Through Joints with shear head bolt (Hexagonal shape) type mechanical connector for jointing of 11kV Aluminium Conductor XLPE Insulated screened and armoured Cables of following sizes as per TPDDL specifications.

Supply of Heat Shrinkable Outdoor Terminations with crimping Al. Lug and possessing UV & Fire retardant property for 1.1 kV ( LT) Aluminium conductor XLPE insulated unscreened and armoured cable of following sizes as per TPDDLspecifications.

Supply of Heat Shrinkable Straight Through Joints with long barrel Aluminium Ferrules for 1.1 kV ( LT) Aluminium conductor XLPE insulated unscreened and armoured cable of following sizes as per TPDDL specifications.

Supply of HT (11 kV) AB Cable 3Cx185 sq.mm + 1Cx150 sq mm messeger wire, as per latest version of IS: 7098 (part-2) and IS: 398 as per TPDDL specifications.

Supply of Single core heat shrink joint for HT (11 kV) 3Cx185 sq mm. AB cable with all required acessories and complete in all respect as per TPDDL specifications.

Supply of Single core heat shrink O/D Termination for HT (11 kV) 3Cx185 sq mm. AB cables with all required acessories and complete in all respect as per TPDDL specifications.

Supply of Rail pole painted with red oxide & aluminium paint

Supply of 1100 V AB Cable 3C X150 sq.mm + 1C X 16 sq.mm + 1C X 150 sq. mm + 1C X 150 sq mm messeger wire, complete as per TPDDL specifications.

Supply of 11 Meter long PCC Pole having working load capacity of 365kg and as per latest version of IS:1678, as per TPDDL specifications.

Supply of 9 Meter long PCC Pole having working load capacity of 160kg and as per latest version of IS:1678 as per TPDDL specifications.

Supply of 3 phase LT junction box complete in all respects as per TPDDL specifications.

Supply of HDPE pipe PE-63 grade, DN-160mm and PN-6 Class.

Supply of HDPE pipe PE-63 grade, DN-200mm and PN-6 Class.

Supply, Installation, Testing and Commissioning of 11 KV 4-Way Motorised Ring Main Unit (2VCB+2LBS) having FRTU Technologies as per TPDDL specification. The item is including of Foundation work and making of all electrical connection as per Engineer-in-charge and as per TPDDL specifications.

Supply, Installation, Testing and Commissioning of 400amp LT ACB as per attached TPDDL Specification.

Supply, Installation, Testing and Commissioning of 800amp LT Main Switch as per attached TPDDL Specification.

Supply, Installation, Testing & Commissioning of C-Type service pillar as per TPDDL specification.

Supply of HDPE pipe as per IS 4984, PN-4 class of following size.

90 mm outer dia nominal size.

120 mm outer dianominal size.

Suppy double walled corrugated (DWC) High Density poly ethylene (HDPE) pipe of following size having corrugation on the outer wall and plain surface on inner wall confirming to IS:14930 (part I & II) and as required by utility owning agaency.

90 mm outer dia nominal size.

Supply at site of hot dip galvanised octagonal poles 3mm thick HT sheet along with base plate, bottom AF and top AF will be as per approved drawing a with maximum wind speed of 169KM/hr.including the cost supplying fixing of the following of the window box with hing type door or any other provision at hight 2mtr approx provided for cable termination:- (a) Inside the window welding 3 nos. GI strips 4mm thick of suitable length having suitable size tapped holes as reqd for laminated sheet (terminal block).

6 Meter long

7 Meter long

8 Meter long

9 Meter long

12 Meter long

Supply 4 nos 25 mm dia x 850 mm long G.I. foundation bolts with nuts, washer including 2 mm dia holes to match with PCD of pole base plate as reqd for 12mtr pole.

Supply 4 nos 25 mm dia x 750 mm long G.I. foundation bolts with nuts, washer including 2 mm dia holes to match with PCD of pole base plate as reqd for 6/7/8 mtr pole.

Supply at site of 1500mm Single arm bracket made up of 48mm dia GI pipe suitable for 6/7/8/9 & 12 Mtr poles simillar as provided at site by owning agency and as per site requirement.

Supply at site of 1500mm Double arm bracket made up of 48mm dia GI pipe suitable for 6/7/8/9 & 12 Mtr poles simillar as provided at site and specifivation of state PWD/applicable authority as per site requirement.

Supply at site steel rebar and cement concrete of appropriate grade for foundation for 6/7/8 & 9 Meter octagonal pole as per standard drawing (Bajaj, Philips and Kaselac etc.) in and specification of PWD/utility owning agency and as per site requirement.

Supply at site steel rebar and cement concrete of appropriate grade for foundation for 12 Meter octagonal pole as per standard drawing (Bajaj, Philips and Kaselac etc.) and specification of PWD/utility owning agency and as per site requirement.

Supply of 3 core 2.5 sq. mm. Copper conductor FR PVC cable for power supply from MCB to fixture

Supply of 6mm thick laminated sheet with 4P, 63 Amp terminal block for suitable for 25 sq mm conductor - 4 nos. & shorting links on DIN channel i/c pdg and fixing DIN channel of suitable length - 2 nos. on the existing laminated sheet and including supplying and fixing 6 amp. SPMCB 'C' Characteristics curve - 1nos

Supply of 150 W LED street light with Epoxy powder coated Pressure Die Cast Aluminium housing with wetherproof gasket (IP 66) for LEDs and control gear compartments. Pressure die cast aluminium frame with heat resistant toughened clear glass fixed with S.S screws.In addition to built-in 5KV surge Protection in driver , the LED street light is equipped with 10KV external surge protection.( like philips, bajaj or as per PWD/MCD approved)

Note:- The items mentioned in the Schedule-C are CREDIT/Recoverable items. The Items shall be executed to recover the amount against released/ dismantle material, if any as per discretion of Engineer In Charge.

Note:- For payment of the items to be executed under scheduled D [Any other DSR Items-DSR (E&M)-2025)], the rates of the DSR shall be taken excluding of GST.

Supply of 48 Fiber OFC Cable

Unit Rate (In INR)

Splicing of OFC (48 F/24F) including supply of protective encloser a existing /new joint chmber for making straight /branch joints end to end testing of all fibers after scalping

Part B:- LABOUR

Installation,Testing & Commissioning of new 11kV 3way/4way RMU including making of foundation, making all electrical connections complete as per directions of Engineer.

Installation, testing & commissioning of new LT Feeder pillar A / B Type including making all electrical connections complete in all respects as per directions of Engineer.

Installation, testing & commissioning of new 3-phase LT junction box and making all electrical connections of LT cable, service mains etc. complete as per directions of Engineer.

Dismantling of ACBs from old place including removing of all existing electrical connections and Erection at new place.

Making all electrical connections of LT cable / overhead LT Line with ACBs as per site requirements.

Erection, Testing & Commissioning of 11 kV GO/DO Switch complete with all hardware fittings & accessories.

Removing of all existing electrical connections from 250 KVA to 990 KVA transformers, RMU as required for shifting of the equipment as per site requirements.

Shifting of 11 kV Distribution transformer (250 KVA-990 KVA) / 11 kV RMU from existing place with the help of crane or chain pulling block and Installation at new place with proper safety measures including Making of all necessary electrical connections complete in all respects.

Dismantling, Shifting, Erection, Testing & Commissioning of Distribution Transformers of following ratings (Including Disconnection and Reconnection of cables and Transformer accessories etc as required)

Supply of A / B type of Feeder pillar complete in all respects as per TPDDL specifications.

Laying, Testing and Commissioning of one number 33 KV Aluminium Conductor XLPE Insulated Armoured Cable of 3CX 400 Sq mm size direct in ground including excavation, sand cushioning, protective covering, refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Excavation of Pits for identification of U/G cable or other utility by manual means over areas (All kinds of soil) and Backfilling of the same as per directions of Engineer-in-charge

Laying, Testing and Commissioning of one number additional 33 kv Aluminium conductor XLPE Insulated Armoured cable of 3CX400 Sq.mm size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering, refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Laying Testing and Commissioning of one number 33 kv Aluminium Conductor XLPE Insulated armoured cable of 3CX400Sq.mm size in the existing Pipe (RCC / HUME / METAL / HDPE) as required on site.

Laying, Testing and Commissioning of one number XLPE Insulated and PVC sheathed power cable of 11 kV grade of size (120sq.mm - 400sq.mm) direct in ground including excavation, sand cushioning, protective covering, refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Laying, Testing and Commissioning of one number additional XLPE Insulated and PVC sheathed power cable of 11 kV grade of size (120sq.mm - 400sq.mm) direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering, refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Laying of Pipes (HDPE / GI / MS / RCC) exceeding 80 mm dia but not exceedin

g 300 mm dia, including jointing them / providing sockets etc, by Manual Moling or by excavation upto 1.5 mtr. depth, dressing of sides, ramming of bottoms and then returning the soil as required, in layers not exceeding 20cm in depth, consolidating each deposited layers by ramming, watering, etc and disposing of surplus excavated soil within a lead of 50 m as per directions of Engineer. .

Laying Testing and Commissioning of one number XLPE Insulated and PVC sheathed power cable of 11 kV grade of size (120sq.mm - 400sq.mm) in the Pipe (RCC / HUME / METAL / HDPE) as required on site.

Laying Testing and Commissioning of one number XLPE / PVC Insulated and PVC sheathed power cable of 1.1 kV (LT) grade of following sizes, direct in ground including excavation, sand cushioning, protective covering, refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Crossing of Roads by Trenchless technology and laying of HDPE / Metal Pipes of dia 160 mm including jointing of pipes etc. as required at site.

Crossing of Roads by Trenchless technology and laying of HDPE / Metal Pipes of dia 200 mm including jointing of pipes etc. as required at site.

Supply and Laying of "B" class GI Pipe of 100 mm dia for cable mounting on DP, etc. as per directions of Engineer.

Supply and Laying of "B"class GI Pipe of 150 mm dia for cable mounting on DP, etc. as per directions of Engineer.

Supply, Erection, Testing & Commissioning of Earthing as per latest IS: 3043, complete in all respect.

Laying, Testing and Commissioning of one number additional XLPE / PVC Insulated and PVC sheathed power cable of 1.1 kV (LT) grade of following sizes direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering refilling the trench and disposal of surplus mulba etc. within 50 metres lead as per directions of Engineer.

Laying of one number XLPE / PVC Insulated and PVC sheathed power cable of 1.1 kV (LT) grade of size 185sq.mm - 400sq.mm in the existing RCC / HUME / METAL / HDPE pipes as required.

Supply and fixing of Earthing GI Strip size 50 X 6 mm including connection / jointing etc. complete in all respect.

Making, ,Testing & commissioning of Heat Shrinkable Type Straight Through Joint Box for 33 kV XLPE Insulated Cable of size 3CX400 Sq.mm complete in all respect

Making, Testing & commissioning of Heat Shrinkable Type Outdoor end termination for 33 kV XLPE insulated cable of sizes 3CX400 Sq.mm complete in all respects.

Making, Testing & commissioning of Heat Shrinkable Type Indoor end termination for 11 kV XLPE insulated cable of following sizes.

Making, Testing & commissioning of Heat Shrinkable Type Outdoor end termination for 11 kV XLPE insulated cable of following sizes.

Making, ,Testing & commissioning of Heat Shrinkable Type Straight Through Joint for 11 kV XLPE Insulated Cable of following sizes.

Making,Testing & commissioning of Heat Shrinkable Type Outdoor Termination for 1.1 KV (LT) cable complete in all respect.

Making,Testing & commissioning of Heat Shrinkable Type Straight Through Joint for 1.1 KV (LT) Cable complete in all respect.

Stringing, Testing & Commisioning of 1100 V AB Cable 3C X150 sq.mm + 1C X 16 sq.mm + 1C X 150 sq. mm + 1C X 150 sq mm messeger wire, complete as per direction of Engineer and site requirement.

Stringing, Testing & Commisioning of 11 kV, HT AB Cable 3C X185 sq.mm + 1C X 150 sq mm messeger wire, complete as per direction of Engineer and site requirement.

Making, Testing & Commissioning of Single core heat shrink joint for HT (11 kV) 3C x 185 sq mm. AB cables with all required acessories and complete in all respect.

Making Testing & Commissioning of Single core heat shrink O/D Termination for HT (11 kV) 3C x 185 sq mm. AB cables with all required acessories and complete in all respect.

Supply, Fixing & Painting of wire mesh fencing for protection of Transformer, RMU etc. as per approved design, specifications and site requirements.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 ( 1 cement and 4 coarse sand).

Providing and laying in position Ready Mix plain cement concrete mix of M-15 grade.

Shifting of wire mesh fencing from old place to new place including dismantling, reinstallation, civil work / Painting, etc with all required accessories and complete in all respects as per direction of Engineer.

Supply and fixing of Earthing GI Strip size 25 X 6 mm including connection / jointing etc. complete in all respect.

Supply and Laying of Earthing GI wire size of 6 S.W.G including connection / Termination / jointing as required for earthing .

Supply, Erection and Commisssioning of 11 KV Porcelain Disc Insulator complete with all hardware fittings & accessories

Supply, Erection and Commisssioning of 11 KV Porcelain Pin Insulator with Pin & complete with all hardware fittings & accessories.

Erection of PCC/ Rail / ST Pole (Above 8 mtr and upto 13 mtr. long) in brick ballast and ramming the foundation with cement concrete (1:2:4) included excavation, backfilling & disposal of surplus mulba within 50 metres lead as per directions of Engineer.

Supply and erection of Bow stay set complete (galvanised) with19/20 mm dia x 1.8 mtr long stay rod, anchor plate of size 45cm x 45 cm x 7.5 mm, thimble, stay clamps, bow tightner, 7/4.0mm dia G.I. Stay wire and strain insulator etc in cement concrete 1:3:6 grade foundation including excavation and backfilling also with 0.6m long brace of size 50 mm x 50 mm x 6mm angle iron with 50 mm dia pulley fixed at one end of the brace as required.

Making of Shakle points on HT/ LT Overhead line with all sizes of conductors with using PG clamp/ Lugs etc. and connecting jumpers/ Cables complete in all respects.

Supply and erection of Suspension clamp assembly with Eye Hook and all required hardware fittings & accessories for AB Cables.

Supply and erection of Dead end clamp assembly with Eye Hook and all required hardware fittings & accessories for AB Cables.

Supply and fixing of Number plate with clamp with all required accessories and complete in all respects.

Supply and fixing of Danger plate with clamp with all required accessories and complete in all respects.

Supply, Stringing, Testing & Commissioning of ACSR DOG Conductor.

Supply, Fabrication & fixing of Hot-dip Galvanized Steel Materials like channel, angles, flats, cross arms, clamps, hardware, nut-bolts etc. as per directions of Engineer.

Dismantling of overhead line comprising of copper / Aluminium over head conductor, AB cables, G.I. Wire, cross arms, insulator, hardware fittings, etc as required (Mtr/ckt) including earth, guard wire etc.

Dismantling of pole (PCC / Rail / ST/HVDS transformer) complete (including all hardware fitting,street light fitting and stacking in safe custody of contractors).

Cutting bituminous road and making good the same portion including supply of extra quantities of materials i.e aggregate, moorum screening, red bajri and labour as required.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 mtr lead as per directions of Engineer-In-charge.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-In-charge.

Providing and Laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coa

rse sand, filling the joints with fine sand etc. all complete as per direction of Engineer.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Dismantling of Street lights poles embedded in cement concrete foundation etc. including removal of lamp fittings, accessories completely and transportation to designated store as per directions of Engineer-In-Charge.

Digging of trence (0.75 meter width and 1 meter depth) in normal soil for single or more cable / corrugated DWC HDPE pipe including disposal of material within 50 meter lead as per direction of Engineer-In-charge.

Laying double walled corrugated (DWC) Hige Density poly ethylene (DHPE) pipe of following size having corrugation on the outer wall and plain surface on inner wall confirming to IS:14930 (part I & II) ,in existing trench and as required.

Casting of foundation for street light pole 6/7/8/9 and 12 mtr long (G.I. Octogonal pole) including excavation, rebar cutting, bending and shuttering etc. complete as required.

Erection of new / old 6/7/8/9/12 Mtr GI octagonal pole and complete as required.

Supply of HDPE pipe PLD Duct 40 mm dia

Per joint per OFC

Laying of OFC along with PLB HDPE Pipe duct

Unit Rate (In INR)

Schedule-B

Splicing of OFC (48 F/24F) including supply of protective encloser a existing /new joint chmber for making straight /branch joints end to end testing of all fibers after scalping

Total of Schedule- C (Exclusive GST)

Release of PCC poles

Release of Steel / Iron scrap

Release of Alu. Conductor (Dog, Wolf, Weisel, Goat etc.)

Release of LT AB Conductor & Cable

Release of HT AB Conductor & Cable

Release of LT U/G cables in scrap

Release of HT U/G cables in scrap

Total of Schedule- A (Exclusive GST)

For payment of the items to be executed under scheduled D [Any other DSR Items-DSR (E&M)-2025)], the rates of the DSR shall be taken excluding of GST.

Schedule-A

Part-C :- CREDIT/Recoverable against released/Dismantle material

The items mentioned in the Schedule-C are CREDIT/Recoverable items. The Items shall be executed to recover the amount against released/ dismantle material, if any as per discretion of Engineer In Charge.