WBPHED/DIC/BMSD(D)/NIeT-2 of 2024-25_12

Amount

Dismantling all the switch gear items along with all of the electrical power circuit (from busbar to all the contractors) and control circuit (for diffrent switch gear items) routing making necessary cleaning of the all the different feeder of 7 nos low lift and 2 nos high lift by dismantling the existing fixed board (on which the switch gears were fixed) and checking faults of the above said items by prident electrician by proper elecrtical & electronics instruments as needed to complete the work as per direction of EIC

Fault finding of different feeders switchgear items,lamp,push buttons,capacitors & others items in MCC Panel at site.

Supply delivery of the following items for 1.5 KW DOL submersible Motor feeder panel

3P MPCB(4-6.3A)

3P POWER CONTACTOR 240V AC COIL WITH NO CONTACT (18A)

NC CONTACT BLOCK FOR ABOVE CONTACTOR (18A)

THERMAL OVERLOAD RELAY(3.5-5 A)

MOUNTING KIT FOR OVER LOAD RELAY(3.5-5 A)

6Amp SP MCB FOR CONTROL

230 volt AC INDICATING LAMPS LED TYPE (R-1G-1,A-1)

10 Amp PUSH BUTTON WITH 1NO ELEMENT (GREEN)

10 Amp PUSH BUTTON WITH 1NC ELEMENT (RED)

0-10Amp ANALOG AMMETER 72 SQ MM (DIRECT METER)

415V AC UNDER VOLTAGE/OVER VOLTAGE/SPP MONITORING RELAY

150Amp POWER TERMINAL 3 WAY

Supply delivery of the following items for 50 KW SDS feeder(for High lift) panel

15KVR CAPACITOR NORMAL DUTY,415V AC

40Amp 3P POWER CONTACTOR 240V AC COIL WITH NO CONTACT

40Amp NC CONTACT BLOCK FOR ABOVE CONTACTOR

80Amp 3P POWER CONTACTOR 240V AC COIL WITH NO CONTACT

80Amp NC CONTACT BLOCK FOR ABOVE CONTACTOR

230V AC ON-DELAY TIMER

40Amp TP MCB

0.5-60Amp DIGITAL MOTORPROTECTION RELAY (EOCR-3DM2)

Supply delivery of the following items

1.5 SQ MM WIRE (FRLS)

2.5 SQ MM WIRE (FRLS)

Related Hardware for rectification (pin,fork,ring socket,ferrule, R/YB PVC Tapes,cable tie100mm,cable ducts,metal sheets, nuts, bolts,washers etc. board for fixing items etc ) of 2 nos. centrifugal feeders and 7 nos 1.5 Kw DOL submersible feeder of parsala W/s Scheme with complete new wiring to both the control and power circuit to complete the job as per direction of EIC

Rectification of MCC panel with cutting the old damaged wire and supply of new wiring of panel board including rectification of including changing of Red/Yellow/Blue & Black Insulation Tape with other electrical equipments fittings complete at PARSALA W/S SCHEME

Installation of the above switch gear items and making complete connection of all the control and power circuit of all the centrifugal feeders and 1.5 kw Dol submersible feeders by proper prudent electrician and testing commissoining up to a certain period of operation upto the satisfaction of EIC, as per direction of EIC .

Add: 18% GST

Add: 1% Cess

M/S NABIN GOPAL SENGUPTA (BID ID -5869481)

RAJIB COMPANY (BID ID -5869461)