ward no. 32 Ashok nagar park me open gym (vidhayak kosh)

Amount

(G Schedule Amount) Please Fill BOQ2 Total Amount

(H Schedule Amount) Please Fill BOQ3 Total Amount

Bidder Name

Amount

V R ENTERPRISES(GSTN-04AFMPG0692K1ZC)

M/s Taj Industries(GSTN-08AERPA6889G1ZX)

MS MADRAS CONSTRUCTION(GSTN-08CADPM7161H1ZH)

AARIF MOHAMMED SHEIKH(GSTN-08BNBPS5731D1Z2)

SAHILOWORLD(GSTN-NA)

M/s Sagar Construction CO.(GSTN-NA)

Namo Construction(GSTN-NA)

Description of Work / Item(s)

Amount

Surf Board: The Surf Board made from “B” class GI pipe. The center pipe is of 100mm NB made from “B” class Gi pipe. The bottom support of M.S. plate of 250mm diameter and 10mm thickness is welded at bottom. The handle frame is of 32mm NB & 25mm NB “B” class GI pipe. The movement frame is made up of 32mm Nb “B” class GI pipe. The foundation used for fixing consists of three equal items i.e. 100mm NB made from “B” class GI pipe,M.S round plate of 250mm diameter and 10mm thickness, 25mm*25m*3mm M.S angle. For the movement, bushes are used & for it 75mm diameter with 6mm thickness & 45mm solid bar is used. The footrests is made from aluminium casting material, its sizes are 20mm*270mm & 5mm thickness. For support of footrest is 200mm & 250mm with 3mm thickness M.S. plate and 50mm*50mm CRC square pipe with 2mm thickness is used. Closing caps made from top quality FRP material which is of 2mm thickness. The pins used are made up of 25mm diameter Harden low carbon steel bar. The bearing used are of “6007” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly is made from S.S. material. The circlips used for assembly is of 35mm dia

Double sit up Board: he Sit Up Board made from “B” class GI pipe. The main frame is of 25mm NB made from “B” class GI pipe. FRP sheet of 3mm thickness is molded on main frame. The remaining frame of the sit up board is of 32mm NB made from “B” class GI pipe. The powder coat is done by pure polyester powder with 60 to 70 micron thickness.

Back Extension:The Back Extension made from “B” Class GI pipe. The main frame of 60mm made from “B” Class GI pipe, and the footrest frame is of 32mm made from “B” class GI pipe. The Handle frame is of 32mm made from “B” Class GI pipe. The seats is fitting on the frame is made up of high quality FRP material of size 330mm*300mm of thickness is 3mm & M.S plate of thickness 3mm and size 250mm*200mm is used to support it. The foundation used for fixing is consist of 25mm*25mm M.S. angle of 3mm thickness. The footrests is made from aluminium casting material, its sizes are 130mm* 310mm*5mm. For the support 32mm made from “B” class GI pipe. Closing caps made from top quality FRP material with 2mm thickness. The powder coat is done by pure polyester with 60 to 70 micron thickness.

Chest Press:Seated Puller Equipment is made from “B” class GI pipe. The center pipe is of 100mm NB made from “B” class GI pipe with M.S. round Plate of 250mm diameter & 10mm thickness is welded at bottom. The remaining frame is made up of 25mm NB and 32mm NB “B” class GI pipe. Handle frame is of 32 NB “B” class GI pipe. The seat frame is of 32mm NB “B” class GI pipe, for the assembly different bushes are used which is made from seamless pipe of 50mm OD and 5mm thickness & 50mm solid bar is used. The foundation support made up of three equal items i.e. 100mm NB made from “B” class GI pipe, M.S. Round plate of 250mm diameter and 10mm thickness & 25mm*25mm*3mm M.S Angle. The seats are made of high quality FRP material of size 330mm*330mm of thickness 3mm & M.S plate of size 250mm*200mm*3mm is used to support it. Closing caps made from high quality FRP material which is of 2mm thickness. The pins used are made up of 17mm diameter solid bar. The bearing used are of “6203” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from M.S. pregalvanised material. The circlip used for assembly are of 17mm diameter. The powder coat is done by pure polyester powder with 60 to 70 micron thickness

Arm & paddle Bike:Arm and Paddle Bike made from “B” class GI pipe. The center pipe is of 40mm NB made from “B” class GI pipe. The handle is made up of casted iron material with plastic holding grips. For foundation hole pass provision is provided. The footrests is made from aluminium casting material, its sizes are 130mm*300mm & 3mm thickness. For paddle Diameter 300mm with 8mm thickness M.S. plate is used. Closing caps made from top quality FRP material which is of 2mm thickness. The pins used are made up of 25mm iameter harden low carbon steel. The bearing used is of “6205” permanent lubricated sealed bearing. The nut bolts used for assembly are made from S.S material. The powder coat is done by pure polyester powder with 60 to 70 micron thickness.

Four Wheel Thai Chi Spinner : The Thai-Chi spinner 4 Wheel made from “B” class GI pipe. The center pipe is of 80mm NB made from “B” class GI pipe. And the bottom support of MS round plate of 25mm Diameter &10mm thickness is welded at the bottom. The handle movement frame is of 25 NB & 20 NB made from “B” class GI pipe. The foundation used for fixing is consist of three equal items i.e. 100mm NB made from “B” class GI pipe, MS round plate of 250 mm diameter & 10mm thickness & 25mm*25mm*3mm M.S. angle. Closing caps made from top quality FRP material which is of 2mm thickness. The pins used are made up of 25mm diameter low carbon steel bar. The bearings used are of “6201” & “6205” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from SS material. The A24 circips is used for assembly. The Poly Urethin Plastic bush is used for handling. The powder coat is done by Pure Polyester Powder with 60 to 70 with micron thickness.

Standing & Sitting Twister: The Seating & Standing Twister made from “B” class GI pipe. The center pipe is of 100mm NB made from “B” class GI round pipe, and The bottom support of M.S. round plate of 250mm abd 10mm thickness is welded at bottom. The standing frame of seating twister is of 25mm NB, 32mm NB made from “B” class GI pipe. The handle frame of seating & standing twister is 32mm. The foundation used for fixing is consists of three equal items i.e. 90mm made from “B” class GI pipe, M.S. round plate of 250mm &10mm thickness & 25mm*25mm*3mm M.S. angle. The round plates 300mm*10mm thickness M.S material. Closing caps made from top quality FRP material which is of 2mm thickness. The pins used are made up of 25 mm low carbon steel material. The bearings used are of “6205zz”, “6007zz” permanent lubricated sealed earings of reputed make (FAG/SKF). High tensile steel with galvanized nut bolts are used for assembly. The powder coat is done by pure polyester powder with 60 to 70 micron thickness.

Chin Up Bar: Assisted Chin Up equipment made from “B” class GI pipe. The center pipe is of 80mm NB made from “B” class GI pipe, And the bottom support of MS round plate of 250mm diameter and 10mm thickness is elded at the bottom. The chin up bar OD 25mm is of 20 NB made from “B” class GI pipe. The foundation is provided by in built hole pass. Closing caps made from top quality FRP material which is of 2mm hickness. 8mm thick plate structure is made for chin up support. The powder coat is done by pure polyester powder with 60 to 70 micron thickness.

M/s Taj Industries

SAHILOWORLD

Namo Construction

V R ENTERPRISES

AARIF MOHAMMED SHEIKH

M/s Sagar Construction CO.

M/s Taj Industries

Namo Construction

MS MADRAS CONSTRUCTION

V R ENTERPRISES

SAHILOWORLD

AARIF MOHAMMED SHEIKH

M/s Taj Industries

SAHILOWORLD

Namo Construction

V R ENTERPRISES

AARIF MOHAMMED SHEIKH

M/s Sagar Construction CO.