LAYING OF 600 MM DIA 26 MTR SEWER LINE AT WARD 72 HAPUR ROAD TAALA FACTORY

Supply of material and barricading along tranch during excavation and laynig of pipe with eucalyplus balles 100 mm dia in horizontal section in two rows and verticall posts of 125 mm dia 2 m c/c fastened in with nariyal rope provision of caution board

Excavation of earth in following depths below ground level for laying sever and manhole ordinary soil (earth, sand, loam and clay) including (cuting and jointing and pits remaing drassing) leveling refilling of tranches in 20 cm layer watering and ramming the same and with seafty as per IS coad 3774. 0.00-1.50m below G.L.

Excavation of earth in following depths below ground level for laying sever and manhole ordinary soil (earth, sand, loam and clay) including (cuting and jointing and pits remaing drassing) leveling refilling of tranches in 20 cm layer watering and ramming the same and with seafty as per IS coad 3774. 1.50-3.00m below G.L.

Excavation of earth in following depths below ground level for laying sever and manhole ordinary soil (earth, sand, loam and clay) including (cuting and jointing and pits remaing drassing) leveling refilling of tranches in 20 cm layer watering and ramming the same and with seafty as per IS coad 3774. 3.00-4.50 below G.L.

Provide and fix open timbering in trenches for the following depths below ground level consisting of 40 mm thick approved country wood planks for poling boards 125 mm x 75 mm Indian sal wood wallers and 100 mm dia. sal ballies for struts at 1.5 m c/c,Including labour etc. 0.00 - 3.00 m

Provide and fix open timbering in trenches for the following depths below ground level consisting of 40 mm thick approved country wood planks for poling boards 125 mm x 75 mm Indian sal wood wallers and 100 mm dia. sal ballies for struts at 1.5 m c/c,Including labour etc. 3.00-6.00 m

Supply of ISI marked folloing size of RCC spigotted and socketed non pressure pipe (Dia in mm) as per IS 458 including rubber ring confriming to IS 5382 NP-3 600 mm

Carting laying and jointing ISI marked following sizes of RCC pipe NP-3 or NP-4 pipe socke/spigot including rubber ring and lowering the same into the trenches true to alignment and gradient upto depth as specified below G.L as per IS 783,IS 12288

Dismantling of 600 mm dia old sewer pipe

Cement Concrete with 20 MM gauge approved stone ballast , brick ballast , Local Sand Cement in proportion (6:3:1) Including supply of all materias labours T&P etc. Requried for proper compation of work.( For bedding)

Dismantling of the following type road surface with old and new materials including labour T&P etc. Required for proper completion of the work as per instructions of Engineer-in- charge.

Reinstatment of the following type road surface with old and new materials including labour T&P etc. Required for proper completion of the work as per instructions of Engineer-in- charge.

Construction Of Following Type of manhole as per IS 4111 completed 900 MM Dia Variation in 900 mm dia manhole

Variation in 900 mm dia manhole

Construction Of Following Type of manhole as per IS 4111 completed 1200 MM Dia

Variation in 1200 mm dia manhole