WIDENING OF ROAD JOINING CARRIAPPA MARG TO BS MARG AT LUCKNOW UNDER GE EAST LUCKNOW

Amount

M&L for excavation over area n exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specifed and directed by Engr-in-charge

M & L for 150mm thick spread thickness soling with broken boulders of quarried stone (granite/basalt) inter stics filled, surface formed and rolled & consolidated to required graidient & camber using tandem roller complete all as specified and directed.

M & L for 150mm thick in two layers (each layer 75 mm thick) (Compacted thickness) WBM with coarse aggregate of granite or basalt or trap of grading 2 (63 to 40 mm size) grading 3(50 to 20 mm size) spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

Preparing unsurfaced water bound macadam surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

M & L for applying evenly a priming/tack coat on WBM surface with bituminous primer at 10 Kg per 10 Sqm with paving bitumen grade VG-10 complete all as specifed and directed.

M&L for premix bituminous macadam with 4% binder content by weight of total mix laid/rolled and compacted to reqd gradient and camber (consolidated thickness 75mm or less) using tandam road roller with paving Bitumen VG-30 complete all as specifed and directed.

Preparing of existing black top surface by brushing with wire brushes for removing caked mud etc, seeping with brooms and finally the cleaned surfaces with gunny bags to remove all loose dirt etc.

M&L for apply evenly a priming /Tack coat to existing black Top surfaces with bituminous primer at 5 kgs per 10 sqm with paving Grade VG-10 complete all as specifed and directed.

M&L for Bituminious Premix Semi dense Asphaltic concrete 40mm consilidated thickness with 5.50% binder content by weight of Total mix, rolled and compacted to required camber and gradient using tandem road Roller (8 to 12 tonne) complete with paving Bitumen VG-30 complete all as specifed and directed.

M&L preparation of new surfaces of road for road marking with resin thermoplastic and applying 2.50 mm thick reflective thermoplastic by hot application of approved colour complete all as specifed and directed by Engr-in-Charge

S&F reflective pavement marker of yellow/red colour (Cat Eye) with micro prismatic lense in both directions having thermoplastic body with flex resistant base and abrasion resistant creamer coating, fixing to road surfaces with special adhesive and hammer nails complete all as specified and directed by Engr-in-charge

S&F retro- reflective round delinator stand post made out of 14 gauge MS pipe of outer dia 110 mm and length of 125 cm, painted in black colour and slicked three nos retro reflective sheet band of width 150 mm of different colours as directed, embedded in cement concrete of size 150 x 150 x 300 mm in 1:3:6 type C - 1 using 20 mm stone aggregate etc all as specified and directed by Engr - in - Charge.

M&L Continuous brick edging with fly ask bricks with width equal to the width of bricks laid dry on edge vertically etc all as specified and directed.

Provinding and fixing of speed bump made of heavy duty tough rubber of size 350mmx250mmx53mm and weight 1.2 Kg approx coloured black and yellow brand dark Eye model No 1005 complete all as manufacturer instruction.

M/s Ram Singh Agarwal

M/s Deepak Kumar Agarwal

BHARAT ASSOCIATES PVT LTD

Shakti Tar Products

DARB CONCEPT PRIVATE LIMITED