Electrification to the New Office Building Residential Quarter and Chokidar Quarter of Labour Department at Rajouri.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

1 x 1.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Bell push

Telephone socket outlet

TV antenna socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

8 Module

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

16 way, Double door

12 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way (4 + 18), Double door

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing of following rating 240/415 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning (Above to 32 Amp.).

Single pole 6/10/16 Amp

Single pole and neutral 32 Amp

SPN 40 Amp

SPN 63 Amp

TPN 40 Amp.

TPN 63 Amp.

Supplying and fixing MCCB in cubical panel board. Providing and fixing following rating and breaking capacity MCCB FP in existing cubical panel board including drilling of holes in cubical panel and making connections etc. as required (Make as per annexure enclosed).

200 A 36 KA FP MCCB

160 A,25 KA,FPMCCB

100 A 16 KA FP MCCB

Change Over Switch 160 A FP MCCB type All MCCB's shall be of Micro Processor based with ICU = ICS = 100% and having rotary handles.

Providing and fixing of following protection equipments and other allied accessories including connections, inter connections with suitable size of PVC insulated copper conductor cable including earthing etc. as required.

Aluminium Bus Bar 400 Amp. Set of strips.

Supplying laying, Testing and commissioning of following sizes PVC Aluminium Cable including connections etc as required.

95 Sq.mm 3.5 core

16 Sq.mm Twin Core

Fabrication, supplying, installation testing and commissioning of main pannel made out of 2mm thick M.S. sheet, floor mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors duly painted, with provision for fixing of 1 no incomer FP MCCB, change over switch including providing & fixing of 300 Amp 3 Phase Aluminum bus bar 2 set and Digital Meter devices and MCB strip for housing MCB's including connection etc. as required. submain 4 x 3 x 1 =12 CFT for 2 Nos. = 24 CFT.

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover along with providing and laying of 25 x 5 mm G.I strip from G.I rod upto the main panel.

Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly The earthing pit should be covered with PVC cover. including 25 x 5mm strip. upto the building and from the building upto the wall mounted panel.

Supplying and fixing of Following light fitting with lamps on ceiling/ wall with necessary connection from ceiling rose to fitting by twin core flexible copper wire etc as required.

20/22 watt LED 4 feet tube light fitting/fixture CRCA housing with 2000 Lumens and min lumens efficiency 100 lens/watt P.F 70.95 THD < 16% & voltage input range 140-270 V with Shot circuit & overloading protection circuit off

14 watt LED Mirror light fitting

Water tight Bulk Head fitting with guard and necessary connection with 9W LED Bulb.

18/20 Watt surface mounted round/square slim panel LED Down Lighter min 1400 Lumens (system output) of die cast aluminium housing and heat sink IEC complaint.

Wall Brackets with 12 watt LED lamps.

Supplying and fixing of Angle/Baten Holder with 9 watt LED Lamp polycarbonate including making complete connnections etc as required. (Make as per annexure enclosed)

Supplying and fixing of Musical Bell including making complete connections etc. as required.

Supplying and fixing of following electrical items.

15 Amp. Plug Top

5 Amp. Plug Top

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required.

Ceiling fan 1200 mm sweep alongwith 1"-6" long fan rod. (As per make list)

Exhaust fan 300 mm size (Heavy Duty) (As per make list)

Supplying and fixing of 90 + 5% watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall including wiring with 1.5 sq.mm FRLS PVC insulated copper wire with controlling switch. (As per make list)

Supplying and fixing of Geyser.

Supply , Installation of 9U Network Rack made of CRCA 1.2mm sheet powder coated with RAL9017 color, 4mm toughened tinted glass, Injected one piece polyurethane gasket on frame. Rack components shall be Cooling Fans - 2 Nos, cable Manager - 3Nos, cantilever tray 255D-1 No., Heavy duty stationery shelf, hardware, nuts , power distribution board.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply erection, 24 Port Patch Panel Cat6

Supply erection, Testing and commisioning of Cat6 UTP keystone connector

Supply erection, Testing and commisioning of Cat6 UTP patch cord 1m

Supply Installation Testing and commisionng of RJ45 outlet in existing oxes / plates / frames

Supply Installation Testing and commisionng of Wifi Access Point with PoE ( 4 Port)

Supply, Installation of 10 pair Telephone krone box suitable for Termination of 10 Pair Telephone cable including Krone connectors for 10 Pair cables.

Intelligent analog addressable photothermal multi detector complete with mounting base complete as required.

Intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Addressable manual call point complete as required.

Intelligent addressable programmable sounder complete as required

Response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing and commissioning of Analog Addressable type Active/ Passive Repeater Fire Alarm panel with Backlit LCD Display, having Controls For Reset, Mute, AcceptSilence alarms and Self Test Conforming to BS5839 Standards and Duly approved by EN54/LPCB

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring &LSZH outer sheath complete as required.

Supplying & fixing of fire extinguisher cylinder 6 KG ABC

Supplying, installation, testing and commissioning of Full HD 2 MP 1080P D&N IR Dome/Bullet Camera ( as per technical specifications)

Supply Installation Testing & Commissioning of 3 Core Power Cable 1.5 sqmm.

Supply, Installation, Testing and comissioning of 8 port Layer ‑2 managable Switch with Power on Ethernet (PoE) enabled, with 8 nos. 10/100/1000base Tx PoE port with 2 SFP port, 1 no. dual personality Gbe Port for copper/fiber uplink, 20 Gbps switching capacity, 14.88 MPPS Forwarding performance , maximum power consumption 64 watt. ( as per technical specifications)

4 TB surveillance Hard disk storage device.

Micro SD/SDHC Card 128 GB

1 mtr. Cat 6 Networking patch cord cable.

Supply Installation Testing & Commissioning of 42" LED Monitor, Full HD, HDMI Port, Component Video Inputs, Digital Audio Out.

Supplying ,installation testing and commissioning of 16 Channel Network Video Recorder (NVR).

Supply Installation Testing & Commissioning of STP Cat 6 UTP Cable Armoured, Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be Fire Retardant.

Supply Installation testing and Comissioning of 5mtr HDMI cable

Supply Installation testing and Comissioning of Surge protector for CCTV System.

Supply Installation testing and Comissioning of AVR of rating 3KVA complete with isolation transformer.

Supplying and Fixing of Following sizes of PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required.

25mm PVC Conduit

Supplying, installation, testing & commissioning of 1650 VA inverter alongwith tubular batteries (2 Nos) 150AH 48 Months with warantty & trolley.

Supplying, installation, testing & commissioning of 1.5 Ton Split AC's ( Cold type) alongwith, wall/floor stand etc.

Supplying & fixing of copper pipe for outdoor units.

Supply, installation, testing and commissioning of 125 KVA Servo Motor controlled oil cooled Automatic Voltage Stabilizer to operate on un balanced 3 phase load (Transformer oil to be cooling medium and shall be ISI marked IS-335 with latest amendments) upto date and suitable to operate on unbalanced input volatge of 260 to 480 volts and delivering voltage of 415+ 1%, 3 phase, 50 Hz + 3% AC Power supply. The stabilizer shall be copper wound in sheet steel case, duly powder coated and fitted with wheel roller for easy portability. The tank shall be filled with transformer oil. The voltage stabilizer shall be provided with 3 phase, 500 Amp Aluminium bus bar, MCCB FP 200 A 35 KA and on load Change over switch 200 A FP required during by passing the voltage stabilizer. Preffered Make.:- Electricfield, AE, Front Fort, Jaima, Nachketta

Mohd Shafi

M/S ASHISH AGENCIES