SPL REPAIR TO BLDG NO T 25 27 A A 1 OF ARMD REGT AND OTM ACCN BLDG NO T 16 AND T 68 AT ABOU AND CERTAIN OTHER SANCTIONED WORKS UNDER GE (SOUTH) MAMUN

Amount

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and exc. 1.5 m but n. exc. 3 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and exc. 1.5 m but n.exc. 3 m in depth and getting out complete all as specified and directed.

Returning filling in including spreading, leveling and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed.

Removing surplus excavated material to a distance not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed.

M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 complete all as specified and directed.

M&L for rendering plaster 15 mm thick in cement mortar 1:4, mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid separately as supply only.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching, floor by maintaining required gradient / undulation etc slightly rounded or chamferred angles and throating, complte all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

Add or deduct to item No. 10.00 for each 25 mm girth or part thereof over or under 30 cm ditto complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates), set in cement mortar 1:6 as in cover slabs (for manhole, drains etc.) with plain fair faces, incl necessary formwork complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, including removal of debris from site & deposited where directed complete all as specified and directed.

Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of debris from site & deposited where directed complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position including removal of debries from site and deposited where directed complete all as specified and directed. Note: Reinforcement shall be cut as required to facilitate demolition.

Taking down cement plaster / wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.

Taking down shutters of any description area exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.

M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specifiedand directed.

All as per description of srl item No 21.00 here-in-before but EXCEPT BRICKS. Note: Servicable bricks retrieved from demolition of brick work shall be re-used.

M&L for 10mm thick rendering plaster in cement mortar 1:6, on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in two layers, 1st layer of 5mm thick mixed with WPC @ 200 ml/50 kg of cement and 2nd layer 10mm thick in cement mortar 1:4 on brick or concrete surfaces of walls, surface finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid for separately as supply only.

Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar 1 :3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3 , complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6, type C-1, using 20mm graded stone aggregate as in plinth protection, finished even and smooth using extra cement, incl forming necessary joint and filling with mixture of paving bitumen & sand in 1:3 complete all as specified and directed.

M&L for reparation of newly plastered surfaces of external wall and applying two coats of cement base paint including curing before and after painting, complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, including taking down existing grass, vegetation, small trees and making good the disturbed surface with cement mortar 1:3 and applying two coat of cement based paint, white or tinted including curing before & after paint complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls of any description by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash complete all as specified and directed.

M&L for preparation of newly surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

M&L for preparation of old painted surface of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted shade including priming surface with chalk whitening, complete all as specified and directed.

M&L for complete removal of existing treatment, preparation of surfaces, making the surface even & smooth and applying two coats of oil emulsion distemper including priming surface with chalk whitening complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litr and UV resistance as per IS 15489:2004, alkali & fungel resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicone additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.9 litre/10sqm over new surfaces complete all as specified & directed.

M&L for preparation of new surfaces of wooden & wood based articles of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surface of wood or wood articles of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for anging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F window made of pre painted steel (base steel as per IS 513 of 0.56mm thick D quality galvanized as per IS 277 with zinc of 120 GSM), primer coted with epoxy primer of 5-7 micron thick, finish pinted with a polyester paint of 12-16 micron thck and back coated with 5-7 micron thick alkyd backer.Section for outer frame should be of 72x55mm, centre mulion should be of 72x 50mm, section for fixed glass beading should be of 12x12mm and secion for shutter should be of 48x25mm, Outer frame and mullion section to have rebte for glazed shutter, fly mesh and 20mm provision for guard bar/grill fly mesh shutter section should be of 20x40mm .The section are to be cut to length mitre joined with corner bracket,centre mullion to be fixed with mulion cap,Elixir or equivalent stay,handle 2 nos of heavy duty stainless steel pivot hinge shall be provided per shutter.The window should be panelled with 4mm thick plain float glass and SS mesh for Fly mesh shutter 304 grade, Rubber gaskets areprovided all around the glass.The above frame should be fixed to the concrete/masonary wall by means of selfexpandind screws including 10mm square guard bars with 152.4 mm pitch, for finished item of work complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately) Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately)

S&F pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.

S&F Pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.

M&L for PCC 1:3:6, nominal mix type C-0 (using 12.5mm graded crushed stone aggregate) as in filling of pressed steel door frames/chowkats complete all as specified and directed.

S&F 35mm thick 2nd class hard wood, glazed and skeleton door shutters, factory made, open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed.

S&F 35mm thick factory made 2nd class hard wood plain, framed, panelled door shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.

S&F factory made 18mm (+0.7mm) thick WPC cupboard shutter, prelaminated one side with coating of ultra voilet chemical, glossy/mat finish incl. 100% termite/water proof, fire retardant, Eco friendly, density not less than 600Kg/cum finish at all edges for making edges lipping/bending, complete as per direction of Engineer-in-Charge and manufacturer's specifications.

S&F hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish width of flaps (when open) 30 mm complete all as specified and directed.

S&F Stainless steel fasteners of size 75mm long steel supports, fixed to walls, complete all as specified & directed.

S&F Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters, complete all as specified & directed.

S&F 140 mm long floor door stopper, cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F 300 mm size mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F GI wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed.

S&F in repairs 20mm bore stainless steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.

S&F 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones exc 1.5 Sqm complete all as specified and directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 3mm thick Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed with oil putty complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing ,etc., and making good, cutting not exc 20 cm girth in brick walls, complete all as specified and directed.

S&F steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

S&F steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank, 1000 ltrs capacity, three layers, ISI marked, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old brocken water tank complete all as specified and as directed.

S&F in repairs Stop valve/Angle valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore ccomplete all as specified and as directed.

S&F in repairs 15mm bore bib tap, with flange, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs Stop valve/Angle valve (ISI Marked), fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and as directed.

S&F brass chromium plated soap dish with and including CP screws complete all as specified and as directed.

S&F in repairs, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of concrete bedding, CI floor trap etc complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting etc, complete all as specified and directed.

S&F in repairs health faucet with 8 mm dia,1.2 m long Rubber flexible tube with Chromium plated spring type cover & Wall Hook for water closet complete all as specified and directed.

S&F in repairs CP Brass shower rose 200x200 mm size with brass chromium plated flexible arm 450-550mm long complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x 460 mm and bowl size 400mm x 300mm x 180mm complete all as specified and directed.

S&F PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and directed.

S&F in repairs CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed. complete all as specified and directed.

S&F in repairs Centre hole basin mixer chromium plated without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed.

S&F in repairs Sink mixer without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs PVC low level, push button, dual flush type flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.

S&F in repairs Vitreous china wash basin, oval shape, counter sunk, white, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but inclluding vitreous china pedestal and PVC waste pipe with union, 32 mm dia complete all as specified and directed.

S&F in repairs 32 mm dia, corrugated waste pipe suitable for WHBs/sinks including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.

S&F in repairs Brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) floor trap, plain excluding grating including jointing with solvent cement, complete all as specified and directed.

S&F PVC Grating square 150 mm (hinge pattern with or with out waste hole) fixing in floors complete all as specified and directed. .

S&F in repairs 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) bend, plain with or without oval access, including jointing with solvent cement, complete all as specified and directed.

S&F in repairs 75 mm dia bore PVC (SWR) cowl complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) bend, plain with or without oval access, including jointing with solvent cement, complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with 20 mm dia pipe complete all as specified and directed.

M&L for cutting existing GI pipe 25 mm bore dia for addn/altn, branch connection and inserting of 'Tee' of size 25mm x 25mm x 20mm complete including necessary excavation & earth work complete all as specified and directed. Note: Cost of 25mm x 25mm x 20 mm bore dia Tee and earth work are included in the unit quoted rate.

M&L for machine cut Kota stone slab flooring 18-20mm thick, size of each slab not less than 55cmx55cm, with 75mm wide white marble border alround, laid over & including 15 mm thick screed bed in cement mortar 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing using grinding machine to yield mirror finish complete all as specified and directed.

M&L for Machine cut kota stone slab not less than 15 mm thick as in riser of steps, skirting, dado and pillar laid over & including 10 mm thick screed base in CM 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing using grinding machine to yield mirror finish, complete all as specified and directed.

M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed .

M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

M&L for Vitrified ceremic tiles, polished, light shade, 8 to 9mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed.

M&L for Vitrified ceremic tiles, polished, light shade, 8 to 9mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

M&L for 18 mm thick green marble (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4, complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size having high glossy finish confirming to IS 15658-2006 of 60mm thickness epoxy coated, M-35 Grade, laid dry over and including 50mm thick sand cushion using clean & washed river sand as approved complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in sub base of floors complete all as specified and directed.

Dismantling of plain or corrugated AC sheeting, any gauge, thickness, including ridge etc as in roof covering complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410 W Gde E 250 quality A complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 incl dismantelling of existing valley/gutter etc complete all as specified and directed.

M&L for 25 mm thick (average thickness) PCC1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished even and fair as in roof padding including prepration of surface and mix with water proofing compound and finished even and fair without using extra cement, complete all as specified and directed. Note : WPC shall be measured and paid for separately.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies and in shelves and the like complete all as specified and directed.

M&L for use and waste of form work to sides and soffits of flat, rough finished surfaces of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for cleaning the sewage lines of upto 150mm bore incl cleaning of manhole etc by using cleaning rod or other mechinical means and make it fully functional by flushing with sufficient water including disposal of sludge etc away from residential area and burying in borrow pits including taking off manhole cover carefully and refixing the same after completion of job complete all as specified and directed. (Earth work, if any, and making good to disturbed surface shall be deemed to be included in unit rate)

M&L for cleaning/clearing of bathroom / kitchen / WHB / urinals / WCs of any pattern by cleaning the blockage upto first manhole and making it fully functional by flushing with sufficient water including disposal of sludge etc away from residential area and burying in borrow pits (Earth work if any and making good to disturbed surface shall be deemed to be included in unit rate) complete all as specified and directed.

S&F closing bolt holes etc. in old corrugated steel sheets or aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6 mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25 mm in length complete all as specified and directed.

S&F in repairs false ceiling of 8 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, ceilling roses, holder, regulators, etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good surfaces, wall, floors etc.) complete all as specified and directed.

M&L for Point wiring for one light point / fan point / bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed, FRLS , multistranded copper conductor cable (red, yellow & blue colour) in and including non metalic rigid PVC concealed conduit ISI marked, not less than 20mm dia, medium duty with all necessary fittings such as tee, elbow, socket including sunken steel boxes of suitable size with 3mm thick plastic laminated backelite sheet top for mounting switches sockets etc including FRLS PVC insulated unsheathed multistranded copper conductor cable of size 1.5sqmm (green colour) as continuous earth wire and connecting to earth dolly, and making good to distrubed surfaces of wall/floor to match to existing finishes etc complete all as specified and directed. Note: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces.

All as per description of serial item No. 121.00 here in before but for one 5 pin 5/6 amps socket outlet on same board.

M&L for Point wiring for one socket outlet 5/6 Amp 5 pin for independent board etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm (red, yellow & blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour) connecting to earth dolly, in and including non metalic rigid PVC Conduit medium duty not less than 20mm dia and with sunk cast iron boxes covered with 3.00 mm thick plastic laminated sheet top cover for mounting switches, sockets, regulators etc. complete all as specified and directed.

All as per description of serial item No. 123.00 here in before but with 2.5 Sqmm FRLS cable PVC insulated unsheathed multistrand for 2 in 1 15/16 amp multipurpose socket outlet/metal plug top including 2.5 Sqmm FRLS cable PVC insulated copper wire for earth continuity on independent board.

All as per description of serial item No. 123.00 here in before but with 4 Sqmm FRLS cable PVC insulated unsheathed multistrand for gyser sheet metal plug socket outlet/metal plug top including 4 Sqmm FRLS cable PVC insulated copper wire for earth continuity on independent board.

S&F Switch piano flush button single pole, one way 6 Amps, 240 volts polycarbonate body complete all as specified and directed.

S&F socket outlet multi purpose 2 & 3 pin, 6A, 230 Volts flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 6 & 16 Amps, flush type, single pole, one way, 230 Volts complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 16 Amps 230 Volts complete all as specified and directed.

S&F ceiling rose 65 X 50 mm, 3 phase PVC / polycarbonate, isolated body complete all as specified and directed.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete complete all as specified and directed.

S&F LED Lamp of 9W, Base B22, BEE 3 Star complete all as specified and directed.

S&F LED tube light fittings (4 feet long), wall mounted 1x20 watt 6500K, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

S&F LED light fitting, mirror type with high out put diffuser, 2 feet,10 watt, 220 volt, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed..

S&F in repairs LED Bulk Head luminaries, 10W complete with all accessories and including connector and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete.

S&F in repairs building security LED light luminaire 30 W, IP 66, IK-07, AC 230 volts, made up of pressure di-cast iron housing complete making connection using PVC insulated and sheathed3 core multi stranded copper conductor cable of size 0.50 Sqmm from ceiling rose including all as specified and directed.

Note for srl item No 59 to 70 above:- 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70. 4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W. 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. Lenses shall be Modular Type. 8. PCB used shall be MC PCB type. 9. CA No. shall be written on each fitting before installation. 10. The name of manufacturer to be embossed on the fitting.

11. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover. 12. The defect liability period of LED lights shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over for replacement. 13. A guarantee of 05 years shall be provided by contractor supported by OEM covering all parts of luminaire. Contractor shall deposit security on this account @ 5% of work done against these items otherwise the same shall be deducted from the dues payable to him in RAR/Final Bill.

S&F sheet metal enclouser, single pole and neutral 240 volt, 20 to 32 Amps with two pin and earth plug and socket plug top complete with single pole MCB complete all as specified and directed.

S&F in repairs sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar 8 way, 240 volts complete all as specified and directed.

S&F in repairs MCB single pole and neutral, 40 Amps, 240 volts, B-series complete all as specified and directed.

S&F in repairs MCB single pole 16 to 32 Amps, 240 volts, B-series complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode, 600mmx600mmx6mm size, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3 connected to earth test point/MCB DBs all as specified and indicated complete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected, complete all as specified & directed. Note:- 1. Earth lead & protection pipes upto & including 7.50 metre length is deemed to be included in the unit rate quoted by the contractor. 2. Earth filling should be free from stones, boulders, aggregate, gravels etc

S&F stepped type electronic mini/deluxe fan regulator 100 watt rotary step all as specified and directed.

S&F decorative wall light white in colour made up of poly carbonate including 9 watt retrofit LED Lamp complete all as specified and directed.

S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F as in repairs prewired VTPN Distribution board of size not less than 750mmx470mm with provision for & including MCCB as incommer 100 Amp, 04 pole IP 54, 16way (for incomming MCCB & outgoing MCBs), with copper busbar for each phase, with Neutral bar, Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 100 Amps MCCB, 16 KA, 4 pole, as incomer and 16 Nos SP MCB's of capacity 6-32amps as outgoing complete all as specified and as directed. Note: Cost of MCCBs and MCBs, cutting chases, grouting in wall shall be deemed included inunite quoted rate ofthis item.

Servicing of ceiling/Exhaust fans including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws, canopy screws of suitable size and ensuring all blades screwed properly before refixing including replacement of PVC fan box round sheet as required on site and making electric connection with flexible copper conductor of size 3 core 0.50 Sqmm including testing to ensure efficient functioning and heat resistant synthetic enamel paint by spray painting incl, writing MES No complete all as specified and directed.

M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.

Supply & laying sub class B bricks old size, in trenches, laid dry, flat, over sand cushioning for protection of cable, with length of brick equal to width of protection complete all as specified and directed. Note:- Sand cushioning shall be measured and paid for separately.

Supply, laying, jointing & and testing of XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor cross sectional area 10 sqmm 2 core, 1100 volts grade complete all as specified and directed. Notes:- Excavation & earth work, sand cushioning, brick protection shall be measured and paid separately.

Supply, laying, jointing & and testing of XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor cross sectional area 25 sqmm 4 core, 1100 volts grade complete all as specified and directed. Notes:- Excavation & earth work, sand cushioning, brick protection shall be measured and paid separately.

S&F 40 mm bore galvanised steel tubing, light grade, with all fittings, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with and including 02 Nos. MS clamp of size 25x4 mm, nuts, bolts and washers complete all as specified and directed.

S&F Aluminium strip 25 x 3.15 mm drawn through 40/32 MM dia HDPE Pipe and fixed to 11 Mtr steel tubular pole including nut bolts & washers threading and riveting for joints for suitable size as required at site complete all as specified and directed. Note: Clamps and HDPE Pipe for fixing to Steel tubler pole shall be measured and paid separately under respective items.

S&F air termination single pointed aluminium rod 12mm dia and 300 mm long for fixing on 11 Mtr pole duly suitable fixing arrangement and making threading in one end of air termination rod complete all as specified and directed.

S&F Test Point terminal block made out of gun metal or Phosphorus bronze size 75x75x25 mm drilled and screwed on pole at height of 1.5 Mtr from the ground level by placing PVC type insulator to preventing from earthing including necessary clamps and nuts if required for better fitment on pole complete all as specified and directed.

M&L for steel tubular swaged poles complete with iron base plate, bolts, nuts & screws as specified type 410 SP-55 (11 metres long) including painting with anti corrosive paint internally complete and externally up to planting depth, alternative green & white strips of 30 cm width upto 1.5 mtr above ground level, balance length to be painted with two coats of aluminium paint externally complete all as specified and directed. Note:- Earth work and PCC will be measured and paid separately under respective items.

S&F HDPE non pressure 40 mm dia pipe, smooth wall, non metallic flexible, suitable for overground use, pressure rating not less than 6 Kgf/ cm2, minimum wall thickness 2.5mm for protection of GI strip/conductor passing through the pole and from test point upto plinth protection complete all as specified and directed.

S&F HDPE non pressure 32 mm dia pipe, smooth wall, non metallic flexible, suitable for overground use, pressure rating not less than 6 Kgf/ cm2, minimum wall thickness 2.5mm for mounting on 40 mm dia HDPE pipe for air termination rod including necessary reducers/ clamps/sockets/ Nut botls complete all as specified and directed.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from steel section including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of alumn paint complete all as specified and directed.

S&F Shackle insulators porcelain, vitreous, white,brown or green insulator including one set of galvanised mild steel section of straps 40 x 6 mm, dia of bolt 18 mm alongwith iron washers and one galvanised iron nut, 145 mm height, 100 mm dia for 1100 volts grade complete all as specified and directed.

Stay assy complete with MS stay plate of size 300mmx300mmx6mm thick, stay rod 20mm dia, stay bow, nuts, bolts and check nuts of GI all as shown in EP No 01 of SSR Part-I of 2009 complete all as specified and directed. Note:- Excavation, PCC, stay wire and loop type insulators will be measured and paid for separately.

M&L for galvanized steel stay wire size 7/ 4.0 mm for stay of poles complete all as specified and directed.

M&L for loop type insulator vitreous, poecelain, white/brown/green, large size, with overall dimensions 90 x140 mm, clearance of hole 25.5 mm complete all as specified and directed.

M&L for ACSR conductor (Squirrel conductor 6 x 211 + 1(Al) x 211 Steel), of any size drawn straight horizontal on over head lines on poles including binding with insulators using aluminium binding wire, jointing jumpers etc including connection to Air Termination Rod complete all as specified and directed. Note:- 3% for sag shall be added in weight of ACSR for payment purpose.

Abrol construction co (BID ID -3117649)

M/S NARESH KUMAR SHARMA (BID ID -3117364)

M/S HIMANSHU BUILDERS (BID ID -3127981)

BRIGHT BUILDERS (BID ID -3117026)

dadwal engineers (BID ID -3128579)

s k construction co (BID ID -3116810)

Bidder Name

s k construction co

dadwal engineers

Abrol construction co

M/S TARA CHAND CONSTRUCTION CO.

M/S NARESH KUMAR SHARMA

M/S HIMANSHU BUILDERS

BRIGHT BUILDERS