Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-AOC ARA P O GANESHPUR DIST LATEHAR PIN 829202 | LATEHAR | JHARKHAND | 829202 | L1 | Accepted-AOC AS PER AGREEMENT | |
| 2 | L2₹2.8 L−₹12,756.50 (4.34%)Rejected-Finance | L2 | Rejected-Finance AS PER TCR | |
| 3 | L3₹4.3 L+₹1.4 L (47.9%)Rejected-Finance | L3 | Rejected-Finance AS PER TCR |
Tender Value
₹2.7 L
EMD Value
₹3,450
Closing Date
16 Aug 2022, 5:00 pmClosed
PROJECT ENGINEER (EnM),
Project Office Magadh OCP
Sparing of one number 5 KVA Generator installed for tower light of view point at Chamatu patch by extension of JBVNL power from 28 no coal stock and also barricading of Two numbers 500 KVA Transformer under Magadh OCP MS Area
2022_CCL_252312_1
P.E. (EnM)/MAGADH OCP/eNIT/22-23/02
Open Tender
Electrical and Maintenance Works
Item Rate
12 days
Magadh OCP
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,450
Yes
11 Jan 2024
3 Aug 2022
17 Aug 2022
4 Aug 2022
16 Aug 2022
4 Aug 2022
4 Aug 2022 - 13 Aug 2022
Amount
Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.
Erection of metallic pole of length above 10mtr and upto 12 mtr in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 4 wire system.
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required
Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 2 wire system.
Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required .
Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required
Supplying and erection of stay set complete (galvanised) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire
Supply of 6 SWG G.I wire
Erection of G.I wire no-6/8 SWG including binding etc.as required
Fencing with RCC post placed at required distance,embedded in CC blocks, provided with horizontal lines &2 diagonals of barbed wire. With G.I. barbed wire.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Total impact of GST for the purpose of CTC
M/s D.K.ENTERPRISES
M/S SATISH KUMAR MAHTO
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .