REPAIRS TO CERTAIN TYPES OF WOODEN AND STEEL LOCKERS TABLE DINING ORS AND CERTAIN TYPE WOODEN AND STEEL FURNITURE AT BSO NORTH UNDER GE NORTH SECUNDERABAD

Amount

LOCKER BED SIDE STEEL FD257. FD1029 Removing the existing unserviceable handle and supply and fix new steel handle cast type of 100mm size for 'Locker bed side steel' and complete all as specified and shown on drawing. Drg No. FD257 & FD1029

Removing the existing unserviceable Clamp/stud and supply and fix clamp shaped stud steel sheet made out of 1mm thick sheet of size 75x80mm duly shaped for holding hinges/shutter complete all as specified and shown on drawing. Drg No. FD257 & FD1029

Removing the existing unserviceable tower bolt and supply and fix stainless steel tower bolt 50mm long complete all as specified and shown on drawing. Drg No. FD257 & FD1029

Removing the existing unserviceable hasp and staple and supply and fix Stainless steel hasp and staple of size 75mmx40mmx3mm complete all as specified and shown on drawing. Drg No. FD257 & FD1029

Removing the existing damaged bottom portion with legs and supply and fix bottom portion with legs of locker bed side steel made out of 1mm thick mild steel sheet with full duly cutting, welding to all sides of the new legs and applying two coats of olive green synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drawing.Drg No. FD257 & FD1029

Removing the existing conduit pipe and supply and fix 20mm dia steel conduit pipe hanger rod 375mm long in the locker bedside steel complete all as specified and shown on drawing. Drg No. FD257 & FD1029

Removing the existing sockets for conduit pipe and supply and fix 20mm dia steel sockets to hold conduit pipe complete all as specified and shown on drawing. Drg No. FD257 & FD1029

Removing the existing unserviceable/broken shelf and supply and fix shelf of size 530mmx370mm x 1mm thick mild steel sheet of locker bed side steel complete all as specified and shown on drawing. Drg No. FD257 & FD1029

Removing the existing unserviceable broken Shutter and supply and fix shutter of size 910mmx340mm x 1mm thick mild steel sheet and complete all as specified and shown on drawing. Drg No. FD257 & FD1029

Material and labour for preparation of the surfaces of locker bed side steel internally and externally and making good the locker duly welding/denting to all places of locker where ever required and applying two coats of synthetic enamel paint of Olive green colour over a coat of red oxide primer with machine spray complete to all old/new surfaces internally & externally complete as specified and shown on drawing. Drg No. FD257 & FD1029

LOCKER BED SIDE DB-4074 Removing the existing unserviceable /broken shelf and supply and fix shelf of 12mm thick ply wood with one side teak face for locker bedside complete all as specified and shown on drawing and as directed. Drg No. DB-4074

Removing the existing unserviceable broken top planks and supply and fix 19mm thick teak wood top for locker bedside complete all as specified and shown on drawing. Drg No. DB-4074

Removing the existing unserviceable broken side panel and supply and fix teak wood side panel planks of 8mm thickness for locker bedside complete all as specified and shown on drawing. Drg No. DB-4074

Removing the existing unserviceable broken bottom planks and supply and fix teak wood bottom plank of 12mm thickness for locker bedside complete all as specified and shown on drawing. Drg No. DB-4074

Removing the existing unserviceable broken leg and supply and fix teak wood leg of size 50x50x50mm for locker bedside complete all as specified and shown on drawing and as directed. Drg No. DB-4074

Removing the existing unserviceable broken back panel and supply and fix 10mm thick teak wood back panel for locker bedside complete all as specified and shown on drawing. Drg No. DB-4074

Removing the existing unserviceable broken door shutter and supply and fix 10mm thick teak wood panel/frame with teak wood shaping for rails of door shutter of locker bedside with necessary butt hinges of required size complete all as specified and shown on drawing. Drg No. DB-4074

LOCKER BED SIDE FD-54 Removing the existing unserviceable broken shelf of locker bed side and supply and fix shelf of 12mm thick ply wood with one side teak face complete all as specified and shown on drawing. Drg No. FD-54

Removing the existing unserviceable broken top panel or partition panel and supply and fix 19mm thick teak wood top panel or partion panel of locker bed side complete all as specified and shown on drawing. Drg No. FD-54

Removing the existing unserviceable broken side panel or partition panel and supply and fix 19mm thick teak wood side panel or partition panel of locker bed side complete all as specified and shown on drawing. Drg No. FD-54

Removing the existing unserviceable broken bottom panel and supply and fix 19mm thick teak wood bottom panel of locker bed side complete all as specified and shown on drawing. Drg No. FD-54

Removing the existing unserviceable broken leg and supply and fix teak wood leg of size 50x50x75mm for locker bed side complete all as specified and shown on drawing. Drg No. FD-54

Removing the existing unserviceable broken rail stiffener and supply and fix teak wood rail stiffener of size 40x25mm to fixing leg of locker bed side complete all as specified and shown on drawing. Drg No. FD-54

Removing the existing unserviceable broken back of locker bed side and supply and fix 6mm thick ply wood back with commercial face veneers on both sides complete all as specified and shown on drawing. Drg No. FD-54

Removing the existing unserviceable broken shutter and supply and fix new shutter of 18mm thick one side teak ply wood including providing teak wood edging of 18mm X 6mm all round the shutters with necessary butt hinges of suitable size complete all as specified and shown on drawing. Drg No. FD-54

LOCKER BEDSIDE : FD-222 Removing the existing unserviceable broken shelf and supply and fix shelf of 12mm thick ply wood with commercial face veneers on both sides exterior grade, to the front side of shelf with 12mmx6mm teak wood beading duly painting with two coats of grey synthetic enamel paint to the beading complete all as specified and shown on drawing. Drg No. FD-222

Removing the existing unserviceable broken side panel of locker and supply and fix side panel of size 1030x515mm wide made out of 19mm thick plywood complete all as specified and shown on drawing. Drg No. FD-222

Removing the existing unserviceable broken back panel and supply and fix back panel of 6mm thick ply wood commercial both side phenyl bonded of the size 1030x765mm duly painting with two coats of synthetic enamel paint complete all as specified and shown on drawing. Drg No. FD-222

Removing the existing unserviceable broken top of locker bed side and supply and fix top bed side 19mm thick plywood complete all as specified and shown on drawing. Drg No. FD-222

Removing the existing unserviceable teak wood supports and supply and fix teak wood supports of size 25mmx25mm and 590mm long at five corners of the lockers bed side fixed with screws of 4 Nos of size 35mmx8mm each side duly polished with two coats of french polish to the legs complete all as specified and shown on drawing. Drg No. FD-222

Removing the existing unserviceable broken shutter of locker bed side and supply and fix shutter of 18mm thick pre-laminated particle board duly providing teak wood edging of 18mmx6mm all round the shutter duly polishing two coats to teak wood edging complete all as specified and shown on drawing. Drg No. FD-222

Removing the existing unserviceable broken centre partition inside of locker bed side and supply and fix 12mm thick commercial ply both side duly providing teak wood edging complete all as specified and shown on drawing. Drg No. FD-222

Removing the existing unserviceable broken bottom of locker bed side and supply and fix bottom of 19mm thick plywood commercial complete all as specified and shown on drawing. Drg No. FD-222

COMMON ITEMS FOR LOCKER BED SIDE : DB-4074,FD54,FD222 Removing the existing unserviceable continous piano hinges of locker bedside and Supply and fix mild steel piano type hinges of width of flaps 35mm (when open) bright finished complete all as specified and shown on drawing. Drg No. DB4074, FD54 & D222

Removing the existing unserviceable handle of locker bedside and supply and fix 75mm size mild steel pressed handle oval type stove enamelled black and complete all as specified and shown on drawing. Drg No. DB4074, FD54 & D222

Removing the existing unserviceable Butt Hinges of locker bedside and supply and fix mild steel Butt Hinges medium weight 75mm long complete all as specified and shown on drawing. Drg No. DB4074, FD54 & D222

Removing the existing conduit and supply and fix 19mm aluminium pipe of length 350mm as hanger rod inside the locker bedside complete all as specified and shown on drawing. Drg No. DB4074, FD54 & D222

Removing the existing unserviceable hasp and staple and supply and fix mild steel 75mm long hasp & staple complete all as specified and shown on drawing. Drg No. DB4074, FD54 & D222

Material and labour for polishing one or more coat to locker bedside duly preparing the surfaces complete all as specified and shown on drawing. Drg No. DB4074 & FD54

Material and labour for preparation of old/new surfaces of locker bedsides and applying one coat of synthetic enamel paint, grey colour internally and externally complete all as specified and shown on drawing. Drg No. DB4074, FD54 & D222

BOOK CASE FD 45, 237 & 407 Removing the existing broken back and supply and fix back of 6mm thick ply wood commercial type of size 1200mmx660mm complete all as specified and shown on drawings. Drg No. FD 45 & FD-237

Removing the existing unserviceable broken side panel or partition panel & supply and fix new side panel of 18mm thick plywood with commercial face veneers on both sides exterior grade of size 660x300mm with teak wood beading of 20mmx6mm thick duly polishing to the beading complete all as specified and shown on drawings. Drg No.FD 45 & FD-237

Removing the existing unserviceable broken shutter and supply and fix shutter of size 370x620mm and 18mm thick one side teak veneer with providing teak wood edging 20x6mm thick around the shutter complete all as specified and shown on drawings. Drg No. FD 45 & FD-237

Supply and fix new continous piano type hinge of mild steel with width of flap 35mm (when open) and 620mm long complete all as specified as directed. Drg No. FD 45 & FD-237

Supply and fix new chromium plated anodised knob of 40mm complete all as shown and directed. Drg No. FD 45 & FD-237

Removing the existing unserviceable broken top and supply and fix top of size 1200x300x18mm thick OST plywood with veneers complete all as specified and shown on drawing. Drg No. FD 45 & FD-237

Removing the existing unserviceable broken inside shelf and supply and fix of 280x760x18mm thick plywood commercial including providing 20x6mm thick teak wood edging of the front side of shelf providing teak wood stiffener of 25X25mm for supporting the shelves complete all as specified and shown on drawing Note : Each shelf measured and paid separately for payment purpose. Drg No. FD 45 & FD-237

Removing the existing unserviceable broken bottom and supply and fix second class teak wood bottom of size 1200x300x20mm thick complete all as specified and shown on drawing. Drg No. FD 45 & FD-237

Removing the existing unserviceable broken leg and supply and fix teak wood leg of size 40x25mm duly polished with two or more coats of french polish alround complete all as specified and shown on drawing. Drg No. FD 45 & FD-237

Removing the existing unserviceable broken rail stiffener at bottom for fixing of legs and supply and fix teak wood rail stiffener of size 50x25mm thick for fixing of legs complete all as specified and shown on drawing. Drg No. FD 45 & FD-237

Material and labour for polishing to the repaired Book case duly preparing the old and new wooden surfaces complete all as specified and as directed. Drg No. FD 45 & FD-237

SIDE BOARD, FD - 26 & 371 Removing the existing unserviceable broken back and supply and fix 6 mm thick commercial plywood complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Removing the existing unserviceable broken side panel and supply and fix side panel of 18 mm thick one side teak plywood exterior grade with teak wood edging of 20 x 6 mm thick all around the shutter on the front side of side panel duly polishing complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Removing the existing unserviceable broken shutter & supply and fix shutter of 18 mm thick 400x590mm size one side teak plywood with teak wood edging of 20 x 6 mm thick all around the shutter on the front side duly polishing the teak wood edge complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Supply and fix mild steel butt hinges of 75 mm long to the cabinet shutter complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Supply and fix chromium plated anodised knob of 40 mm complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Removing the existing broken top and supply and fix top of 18mm thick one side teak plywood complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Removing the existing unserviceable broken inside shelf and supply and fix inside shelf of 12 mm thick plywood with commercial face, both sides with 12 x 6 mm teak wood beading to the front side of shelf duly polishing to the teak wood beading complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Removing the existing unserviceable broken drawer and supply and fix new drawer made out of 12mm thick one side teak of size 250x450mm duly polished with two or more coats of french polish alround complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Removing the existing unserviceable broken bottom and supply and fix bottom of 20 mm thick teak wood plank complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Removing the existing unserviceable broken leg of side board and supply and fix teak wood leg complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Removing the existing unserviceable broken rail stiffener at bottom side for fixing legs and supply and fix teak wood rail stiffener of size 50 x 25 mm thick for fixing of legs complete all as specified and as shown on drawing. Drg No. FD - 26 & FD371

Material and labour for polishing to the repaired side board duly preparing the old and new wooden surfaces complete all as specified and as directed. Drg No. FD - 26 & FD371

TABLE DINING ORs FD-165 Removing the existing unserviceable damaged table top with aluminium sheet from the table and supply & fix table top of size 1900 x 685 mm x 18 mm thick plain particle board (phenyl bonded) exterior grade with 22 gauge aluminium sheet cover over top of sheet complete all as specified and as directed. Drg No FD-165.

Removing the existing unserviceable damaged MS square pipe of steel frame and supply & fix 32mm dia MS square pipe of 1.8mm gauge by welding and applying two coats of synthetic enamel Olive green paint over one coat of primer complete all as specified and shown on drawing. Drg No FD-165.

Material and labour for preparing the old steel surfaces of table dining ORs and applying one coat of synthetic enamel paint of approved colour over a coat of red oxide primer with machine spray complete all as specified and as directed. Drg No FD-165.

Chair Computer Fd/E6/MAP/01 Repairs to Chair Coputer by repairing & replacing new necessary unserviceable/broken parts with suitable sizes and shapes as for the following type, items with necessary gas /arc welding to all broken parts, greasing /oiling to exisiting parts of the chairs where ever required and painting the chairs with two coats of synthetic enamel paint all as per exisiting model/pattern with machine spray complete all as directed. Note: Spares required for replacement shall be measured and paid separately as supply only.

Supply only Push back /tiling locking Mechansim system

Supply only Revolving system and pneumatic gas lift system

Supply only new castor wheel of size 60x50 milimeter

Supply only complete castor wheel base set with five wheel (Made of mild steel base set)

Supply and fix tapestry cloth of cost not less than 250.00 Rupees per meter duly making required shape to suit the existing sample for seat of size 510 x 470 mm and back of size 660 x 470 mm as per ezisting model and removing the existing tapestry cloth complete all as speified and as directed.

Supply and fix 50mm new foam cushion 32 density for seat of size 510 x 470 mm duly making to required shape as per existing sizes / model and removing the existing cushion complete all as specified and as directed.

Supply and fix 50mm new foam cushion 32 density for back of size 660 x 470 mm duly making to required shape as per existing sizes/model and removing the existing cushion compleate all as specified and as directed.

Supply only Polyurethane arm rest as per existing design and duly round shaped of size 360 x 260 milimeter complete all as specified and as directed

CHAIR VERANDAH (FD/MAP-II/06) Supply and fix PVC seat 4mm thick of size 455 x 455 mm with weight not less than 1.85 KG and grooves 90 x 10 mm 10 No. on seat to chair verandah including removing the existing unserviceable PVC Seat complete all as specified, as shown on drawing and as directed.

Supply and fix PVC back 4mm thick of size 455 x 455 mm with weight not less than 1.85 KG and grooves 90 x 10 mm 10 No. on back to chair verandah including removing the existing unserviceable PVC Seat & back complete all as specified, as shown on drawing and as directed.

Material and labour for preparing the old steel surfaces and painting with two coats of white synthetic enamel paint with machine spray and providing 4 No's new PVC inner shoes including taking down the broken shoes and welding as required to be broken frames complete all as specified, as shown on drawing and as directed.

A.K. MARKETING ASSOCIATES

BALAJISTEELINDUSTRIES

sandhya enterprises

SN POWER TECH

Mahesh Traders

M/S DIVIJA BUILDERS