Tender ID

Karnataka

Retender

Works

Lift Irrigation Scheme

Construction of 33KV Sub Station of Chikkalaki Lift Irrigation Scheme In Jamakhandi Taluka of Bagalkot District.

Minor Irrigation Department

Minor Irrigation Division Vijayapura | Karnataka

Amount: ₹3.7 CrCloses: 17 Nov 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published7 Nov 2025
Closed17 Nov 2025
Retendered7 Nov 2025

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 7 Nov 2025

Tender Value

₹3.7 Cr

EMD Value

₹5.6 L

Closing Date

17 Nov 2025, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

Santosh Ingaligi

Mobile Number

Work Description

Construction of 33KV Sub Station of Chikkalaki Lift Irrigation Scheme In Jamakhandi Taluka of Bagalkot District.

Tender Information

Tender ID

MI/2025-26/LI/WORK_INDENT7743

Reference Number

MI/2025-26/LI/WORK_INDENT7743

Tender Type

Open

Product Category

Lift Irrigation Scheme

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Vijayapura

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with UDIN Certified by CA

RequiredRegistration Certificate

RequiredDetails of Existing commitments and ongoing works as per bid document

RequiredDetails Works for which Tenders already submitted as per section 3 of Standard bid document

RequiredLatest Address and contact number for communication to be furnished.

RequiredContractor should produce the updated G.S.T Clearance Certificates, IT Returns, Profit and Loss Statements along with balance sheets issued by Chartered Accountant for the years from 2020-21 to 2024-25.

RequiredLine of Credit in prescribed format.

RequiredWork done Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending Bidder/ firm/ company are advised to visit the work site before submission of the tenders.

The necessary Certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced prior to the opening of bid for verification. Scanned signature of the Bidder/ firm/ company authorized representative of the Bidder/ firm/ company shall be attached while uploading bid document.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.

Corrigendum will be published in the website for all modifications or corrections if any.

The contractor should mention their recent correct postal address & mail address in declaration forms.

All materials like steel, cement etc., required for the above work should be procured by the contractor only. No departmental supply of any materials shall be made by Department.

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also Land acquisition problems if any.

Topographical errors, if any, will not be the ground for any claims by the Contractor.

The necessary Certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced for verification when demanded, otherwise the tender will be treated as non responsive bid and rejected.

Scanned signature of the Bidder/ firm/ company authorized representative of the Bidder/ firm/ company shall be attached while uploading bid document.

Incomplete tender documents will be rejected.

As per the Karnataka Building and other Constructions Workers Welfare Cess Act 1996, 1% of the bill amount will be deducted from the bills.

The contractor should furnish the name of the individual / firm / company with address & telephone No with place of registration, year of incorporation etc.

Original documents shall be produced for verification at the any stage of tender process, Failure to produce original documents will lead to disqualification. Work done certificate should have all the details CR no, work order issuing date, work completion date and year as asked in bid document.

The Applicant shall be registered in KPWD and shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by GOK/GOI.

Restrictions on Public Procurement from Bidders of certain countries as per Government order No. FD 455 Exp-12 2020 Bengaluru dated:25-08-2020.

During the execution of works, if any minor minerals are required, contractors have to abide by the prevailing rules and Acts applicable to Minor Minerals. As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If mineral Dispatch permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 (as amended from time to time) will be deducted from the contractors bill.

The agencies participating in the tender shall be registered in the Construction Labor Board as per the G.O. No. LD 300 LET 2006 Dated:18-1-2007 and Addendum No. LD 95 LET 2013 Bengaluru Dt:1-4-2013. Also the contractors entrusted with the work shall employ the labors only who have registered in the Karnataka Building and Construction Workers Welfare Board failing which the contractor shall be liable for any further action as deem fit by the authority.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms as mentioned in bid document for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract for all works.

The Tenderer has to quote his rate by excluding GST. However contract will be concluded for the AMOUNT (Exclusive of GST) but Applicable GST will be paid extra prevailing at the time of execution If the GST rates are revised during the contract period, the Tenderer/Employer has to accept the revised GST rates for making payment/recovery.

The contractor has to make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing.

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

The Work Done Certificates shall be issued by the Executive Engineer with indent number mentioned (if work done in Karnataka State), otherwise it shall be issued/counter signed by Superintending Engineer (if the work is done in other states).

Sub-Leasing/G.P.A of Work is Prohibited.

Each Item Of BOQ To be read as with all lead and lifts and including loading and unloading charges and all other charges and as per the direction of Engineer in charge.

Uploaded drawings are for TENDER PURPOSE ONLY

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the work listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee into the respective receiving bank accounts of KPPP Portal on or before the last date and time of bid submission.

The tender processing charges paid by the bidder/ firm/ company are not refundable even if the tenders are cancelled.

All other terms and conditions as per KW-4 tender documents.

As a third party, vigilance cell which is working under Major Irrigation is now included in Minor Irrigation and Ground Water Development Department, Vigilance cell has empowered to visit the working site often and often without any prior intimation to check the quality and quantity at any stage till completion. Any lapses with respect to quality and quantity of work, losses, the contractor is held responsible. Please Note.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The registration and supervision charges and all kinds of deposits and taxes to be paid to obtain the RR number etc from HESCOM authorities is the sole responsibility of the contractor and he has to submit the original receipts or copy of the receipts to this office before finalization of the work

Income Tax : Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos. to be uploaded

Contractor registration in CIEG (Chief Electrical Inspector to Government)

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

ITT 3.2c To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. (2020-21, 2021-22, 2022-23, 2023-24, 2024-25). Executed in any one year the minimum quantities of work:1)Earthwork Excavation -12237.00Cum, 2)Cement concrete (including RCC, PCC and PSC- 789Cum, 3)Steel works for RCC (Reinforcement Steel)-54.81 Tonne, 4)RCC NP3/MS/DI Pipe dia not less than 1400mm -368.00 M and 6)11 kV, 3 Core, XPLE HTUG Cable-1.20 Km

Others -- Work Done Certificate issued by the Officer not below the rank of Executive Engineer

Capabilities of Vendor

ITT 3.2b.Satisfactory completion (at least 90% of the contract value), as Prime contractor, at least one similar work such as Construction of LIS Work with 33KV Sub station/ Construction of 33KV Sub station along with Commissioning work from Single Contract of value not less than Rs.185.25 Lakhs during the last five years (2020-21, 2021-22, 2022-23, 2023-24, 2024-25). The work done certificate should be obtained duly signed from an Officer not below the rank of Executive Engineer of the concerned division. Cost of completed works of previous years will be given weightage of 10% per year to bring them to 2025-26 price level

Others -- Work done Certificate

ITT3.3 b. Liquid assets and or availability of credit facilities of not less than Rs.180.34 Lakhs (Credit lines / Letter of credit / Certificates from Banks) for meeting the fund requirement etc

Others -- Bankers Certificate

Total value of civil engineering works executed and payments received in the last five years (year-wise) from year 2020-21 to 2024-25

Others -- statement issued by Chartered Accountant

List of existing commitments and ongoing works

Others -- Certified copy

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- Certified copy

List of Financial Resources with Certificates

Others -- Certified copy

Each Tenderer should further demonstrate: (a) Availability by owning at least 50% of the Required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on lease/ hire basis for all works provided the relevant documents (commitment agreements etc.,) for availability for this work are furnished. i) Hydraulic Excavator -04, ii)Lorry/Tipper/Tractor-06, iii)Concrete Transit Mixer-03

Others -- Others -- RCs or Invoices for owned Machinery/ Lease Agreement along with RCs or Invoices for hired Machinery

Should have been registered as Class-I Electrical/CIVILContractor

Others -- PWD Registration Certificate

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity AxNx1.5-B Where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited.BValue, at 2025-26 price level of existing commitments and ongoing works to be completed during the next year

Others -- Bid Capacity

Financial Status

ITT3.2 a. To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. (2020-21, 2021-22, 2022-23, 2023-24, 2024-25). Achieved in at least two financial years a minimum financial turnover of Rs.741.00 Lakhs. Financial turnover of previous years will be given a weightage of 10% per year to bring them to the price level of FY 2025-26

Others -- Audited profit and loss Account statement issued by Chartered Accountant

Reports on the financial standing of the tenderer, Such as profit and loss statements and auditors reports for the last five year

Others -- Audited profit and loss Account statement issued by Chartered Accountant

Others

Banker Details for reference

Others -- Copy of Bank details

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.6 L

Important Dates

Last Activity

7 Nov 2025

Published

7 Nov 2025

Bid Opening

19 Nov 2025

Download Ends

15 Nov 2025

Pre-Bid Meeting

12 Nov 2025

BOQ Preview

•

Construction of 33KV Sub Station of Chikkalaki Lift Irrigation Scheme In Jamakhandi Taluka of Bagalkot District.

•

POWER TRANSFORMER : Power Transformer Copper windind, 3 MVA, 33/6.6 KV Delta / Star, Dynll, 3 Ph, 50Hz, core type winding with OLTC, RTCC panel, etc, complete filled with Transil oil with 10% spare oi...

•

Supply and installation of Auxiliary transformer 6.6 KV / 433 Volts 160 KVA copper wound, insulating oil filled with all accessories complete as per specifications etc., complete with all lead and li...

•

33 kV, 25 kA class, SF-6 Circuit Breaker with terminal connector suitable for Al. tube/conductor with spring operating mechanism and mounting structure etc., as per technical specification. etc., com...

•

a) 33 kV, 800 A, 25 kA Isolators, double break with manual operating mechanism, with solid core insulator, terminal connector suitable for Al. tube/conductor, marshalling box etc., complete as per tec...

•

Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class : 200/1-1-1 A(3nsCT ea...

•

Single phase, oil filled, outdoor type VT with terminal connector suitable for Al. tube/conductorwith marshalling box etc., complete as per technical specifications 33 kV/root of 3 / 110 V/root of 3 -...

•

Lightning Arrester 30 kV 10kA Lightning Arrester Normal Duty polymeric

•

Discharge Class -2 etc., complete with all lead and lifts and including loading and unloading charges and all other charges as ...

•

110 kV, 66 kV & 33 kV Sub-station : Simplex 110 V DC compatible to SCADA complete as per technical specification 33 kV Panel for Overhead Line etc., complete with all lead and lifts and including lo...

•

110 kV, 66 kV & 33 kV Sub-station : Simplex 110 V DC compatible to SCADA complete as per technical specification 66/11 kV Transformer Panel etc., complete with all lead and lifts and including loadi...

•

Fabrication, galvanising and supply of High Tensile Steel tower materials

•

i) Station structures Tower - 3T1 with peak (0.365 MT per structure*6) including cost of all material, machinery, labour, tran...

•

Fabrication, galvanising and supply of High Tensile Steel tower materials ii) Station structures Beam - 3B1 (6M Width) (0.194 MT per structure) including cost of all material, machinery, labour, trans...

•

Fabrication, galvanising and supply of Mild Steel tower materials

•

iii)) 33 kV Isolators ai) Live point height 3750 mm

•

Note: Three numbers of flexible terminal connectors per Isolators suitable for 63...

•

Fabrication, galvanising and supply of Mild Steel tower materials

•

iv)) Live point height 3750 mm (0.25*3 MT per structure) Including cost of all material, machinery, labour, transportation, taxes w...

•

Fabrication, galvanising and supply of Mild Steel tower materials

•

v)) Current Transformers for 33 kV CTs (0.152 MT per structure*9) Including cost of all material, machinery, labour, transportation...

•

Fabrication, galvanising and supply of Mild Steel tower materials

•

vi)) VoltageTransformers for 33 kV PTs (0.152 MT per structure*6) Including cost of all material, machinery, labour, transportatio...

•

Fabrication, galvanising and supply of Mild Steel tower materials vii)Supply, Erection of Mounting Structures of LA//PI(0.075*6 MT) Including cost of all material, machinery, labour, transportation,...

•

Conductor 7/3.65 mm G.I. Wire for ground conductor etc., complete with all lead and lifts and including loading and unloading charges and all other charges as per the direction of Engineer in charge

•

Insulator: Solid Core Bus Post Insulator 33 kV Supply, Erection of Insulators : 33 kV solid core insulators along with bolted type tension clamps and hardware suitable for Coyote ACSR.(33 kV side) ...

•

Disc Insulator: Disc Insulator 90 kN Supply, Erection of Insulators : 33 kV 90 KN Disc insulators along with Suspension clamps and hardware suitable for Coyote ACSR.(33 kV side) Including cost of a...

•

C - Type Wedge Connector : Coyote to Coyote ACSR Conductor Supply and fixing C type wedge /Terminal connector suitable for Coyote to Coyote Including cost of all material, machinery, labour, transp...

•

COPPER CONTROL CABLE : i).19 core 2.5 Sq.mm for Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery, labour, t...

•

COPPER CONTROL CABLE : ii).4 Core x 6 Sq.mm for Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery, labour, ...

•

COPPER CONTROL CABLE iv).4 Core 2.5 Sq.mm for Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery, labour, t...

•

COPPER CONTROL CABLE v).4 Core 4 Sq.mm for Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery, labour, tra...

•

1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules : vi)Alluminium 4 core 70 sqmm for Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable ...

•

COYOTE ACSR--33 KV Side etc., complete with all lead and lifts and including loading and unloading charges and all other charges as per the direction of Engineer in charge

•

Supplying and Installing, assembling, filling of acid, wiring, assisting, test-charging and discharging Battery set of 110 V, 100 AH. etc., complete with all lead and lifts and including loading and ...

•

110 V, 15 A float and 30 A boost (with float and boost battery charger as per technical specification) etc., complete with all lead and lifts and including loading and unloading charges and all other...

•

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete...

•

Grounding of equipment byproviding cast iron pipe of100 mm ID 13 mm thickness,2.75 metre long with 2 partclamp out of G.I. Flat50 X 6 mm continuously weldedalround the pipe using cast ironwelding elec...

•

DC Distribution Panel (Indoor) as per technicalspecification comprising of earth fault indicator,indication circuit for AC mains failure, 1 no. 100ASFU for I/C + 12 nos. 32A SFU for O/G, completeas pe...

•

LTAC Panel (Indoor), 415 V as per technicalspecification comprising of voltmeter and ammeter,1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU,+ 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/GSFU, 6 nos. 3 Phase ...

•

11 kV, 3 Core, XPLE HTUG Cable withpressure extruded inner sheeth, ROUNDWIRE ARMOURED as per IS-7098 (Part-2)Armouring wires dia and Resistivity as perIS-3975 For 95 Sqmm, (54 GI Wires - 2.5 mm Dia e...

•

11 kV, 3 Core, XPLE HTUG Cable withpressure extruded inner sheeth, ROUNDWIRE ARMOURED as per IS-7098 (Part-2)Armouring wires dia and Resistivity as perIS-3975 300 Sqmm, (58 GI Wires - 3.15 mm Dia) e...

•

Fabricating, supplying and erection of 9 ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS2062 for base plate with door opening arrangements, inc...

•

Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing LED street light fittin...

•

Supply of 120 W LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded...

•

Moving the Transformer to the plinth. Maximum allowable distance is 50 metre (More than 50 metre, approval of D(T) has to be obtained) per t/m etc., complete with all lead and lifts and including loa...

•

Assembly of Transformer parts like bushings, radiators, filling oil into Tr. etc., for the totalweight of the Tr.

•

etc., complete with all lead and lifts and including loading and unloading charges a...

•

Filtration of oil using filter set of the contractor to bring the insulation value to I.E. specification

•

etc., complete with all lead and lifts and including loading and unloading charges and all ot...

•

Wiring of Transformer marshalling box, bucholtz relay, fixing thermometer, OLTC upto control panel and assisting in testing and commissioning by RT/MT/Firm Engineers 5 MVA to 6.3/8 MVA Tr etc., compl...

•

Fabrication of Transformer railing and embedding in Transformer plinth (Rails to be supplied by the Agency) etc., complete with all lead and lifts and including loading and unloading charges and all...

•

Fixing of HT fuse units & wiring etc., complete with all lead and lifts and including loading and unloading charges and all other charges as per the direction of Engineer in charge

•

Erection of BreakerBreaker erection, assembly,alignment & interpole wiring ofbreakers with its connectedequipment including movementfrom the point of unloading to etc., complete with all lead and lif...

•

Erection of IsolatorAssembly, erection, alignment and wiring including movement from the point of unloading to thepoint of erection Upright FOR ITEM NO-4 OF MATERIAL SUPPLY FOR ITEM NO-4 OF MATERIAL S...

•

Erection of IsolatorAssembly, erection, alignment and wiring including movement from the point of unloading to thepoint of erection Upright FOR ITEM NO-5 OF MATERIAL SUPPLY etc., complete with all le...

•

Erection of NCTsErection of NCTs includingmovement from the point ofunloading to the point of erectionwith grounding connections FOR ITEM NO-6 OF MATERIAL SUPPLY etc., complete with all lead and lift...

•

Erection of NCTsErection of NCTs includingmovement from the point ofunloading to the point of erectionwith grounding connections FOR ITEM NO-7 OF MATERIAL SUPPLY etc., complete with all lead and lift...

•

Fixing of Solid Core Insulator FOR ITEM NO-8 OF MATERIAL SUPPLY etc., complete with all lead and lifts and including loading and unloading charges and all other charges as per the direction of Engine...

•

Control PanelErection of control panel,auxilary panel, carrier cabinet,marshalling bay kiosk etc.,alignment and fixing properly tofoundation base includingmovement from the point ofunloading to the po...

•

Station StructureErection, assembly andalignment of Station structure asper the directions of siteEngineer FOR ITEM NO-11 OF MATERIAL SUPPLY etc., complete with all lead and lifts and including loadi...

•

Station StructureErection, assembly andalignment of Station structure asper the directions of siteEngineer FOR ITEM NO-12 OF MATERIAL SUPPLY etc., complete with all lead and lifts and including loadi...

•

Station StructureErection, alignment & assemblyof fabricated steel latticestructure, pedestal structures &mounting structures for GOS,CTs, PTs, LAs etc., FOR ITEM NO-13 OF MATERIAL SUPPLY etc., compl...

•

Station StructureErection, alignment & assemblyof fabricated steel latticestructure, pedestal structures &mounting structures for GOS,CTs, PTs, LAs etc., FOR ITEM NO-14 OF MATERIAL SUPPLY etc., compl...

•

Station StructureErection, alignment & assemblyof fabricated steel latticestructure, pedestal structures &mounting structures for GOS,CTs, PTs, LAs etc., FOR ITEM NO-15 OF MATERIAL SUPPLY etc., compl...

•

Station StructureErection, alignment & assemblyof fabricated steel latticestructure, pedestal structures &mounting structures for GOS,CTs, PTs, LAs etc., FOR ITEM NO-16 OF MATERIAL SUPPLY etc., compl...

•

Station StructureErection, alignment & assemblyof fabricated steel latticestructure, pedestal structures &mounting structures for GOS,CTs, PTs, LAs etc.,FOR ITEM NO-17 OF MATERIAL SUPPLY etc., comple...

•

Busbar FormationMain bus/cross bus (all the three phases in a segment) using Bersimis (Twin/Quad)/Moose ACSR(Twin/Quad)/Falcon/Drake/Lynx/Coyote-single/double conductors with fixing of insulatorspacer...

•

Fixing of Solid Core Insulator FOR ITEM NO-20 OF MATERIAL SUPPLY etc., complete with all lead and lifts and including loading and unloading charges and all other charges as per the direction of Engin...

•

Control Cables and UG CablesLaying of control cables fromequipment to control panels FOR ITEM NO-22 OF MATERIAL SUPPLY etc., complete with all lead and lifts and including loading and unloading charg...

•

Control Cables and UG CablesLaying of control cables fromequipment to control panels FOR ITEM NO-23 OF MATERIAL SUPPLY etc., complete with all lead and lifts and including loading and unloading charg...

•

Control Cables and UG CablesLaying of control cables fromequipment to control panels FOR ITEM NO-24 OF MATERIAL SUPPLY etc., complete with all lead and lifts and including loading and unloading charg...

•

Control Cables and UG CablesLaying of control cables fromequipment to control panels FOR ITEM NO-26 OF MATERIAL SUPPLY etc., complete with all lead and lifts and including loading and unloading charg...

•

Battery Set and ChargerInstalling, assembling, filling of acid, wiring, assisting, test-charging and dischargingBattery set110 V etc., complete with all lead and lifts and including loading and unloa...

•

GroundmatSupplying and laying of MS Flatsof various sizes, welding andapplying ACB paint to weldedportion and covering with as per thedrawing/standard specificationand consolidation etc., complete wi...

•

GroundmatGrounding of equipment with50 x 6 mm G.I. Flat andconnecting equipment to theearthmat/ground pit. Each pointof earthing with all formationworks like bending, twisting,drilling of holes and co...

•

Grounding ofTowers/EquipmentGrounding of equipment byproviding cast iron pipe of100 mm ID 13 mm thickness,2.75 metre long with 2 partclamp out of G.I. Flat50 X 6 mm continuously weldedalround the pipe...

•

GroundmatSupplying & providing 450 mmdia 450 mm height 1.5" to 2"thick hume pipe collar (nonpressure type) for earth pitsincluding all lead and lifts etc., etc., complete with all lead and lifts and ...

•

Errection charges for HESCOM Metering panel(Main and check meter)struss etc for meter box etc., complete with all lead and lifts and including loading and unloading charges and all other charges as ...

•

Testing & Commissioning ofPower TransformersInspection of wires and ferrules.Inspection of wiring of protectivedevices, cooling fans, oil flowpumps, OLTC, RTCC, bushingetc., etc., complete with all l...

•

Testing & Commissioning ofPower TransformersTesting1. Ratio Test2. SC Test3. Excitation Current Test/Highpot Test4. Magnetic Balance Test5. Vector Group Test6. Induced High Voltage Test7. OLTC Operati...

•

Assisting in Testing and Testing and Commissioning of Breaker etc., complete with all lead and lifts and including loading and unloading charges and all other charges as per the direction of Engineer...

•

Wiring:Identification, ferruling, crimpingand termination of wires inBreaker limbs, marshalling box& wiring up to controlpanel/relay panels, extension ofearth mat etc., for Breaker etc., complete wit...

•

Erection of IsolatorAssisting in Testing and CommissioningUpright etc., complete with all lead and lifts and including loading and unloading charges and all other charges as per the direction of Eng...

•

Erection of NCTsTesting and Commissioning ofNCTs: Insulation Resistance,Polarity, Ratio, Excitation, CoreIdentification, Tan-Delta andCapacitance Test) etc., complete with all lead and lifts and incl...

•

Commission charges for a)33 kV Sub-station : Simplex 110 V DC compatible to SCADA complete as per technical specification. 33 kV Panel for Overhead Line etc., complete with all lead an...

•

Control Panel Testing & Commissioning : C&R Panels Wiring & TestingWiring of C&R panels:Identification, ferruling,crimping, termination of wires inC&R panels (without SAS) etc., complete with all lea...

•

Control Panel Testing of C&R panels:Testing for insulation level,testing of relays, controloperations for closing trippingetc., interlock. Alarm etc., complete with all lead and lifts and including l...

•

Commission charges for a)33 kV Sub-station : Simplex 110 V DC compatible to SCADA complete as per technical specification. 33 kV Panel for Overhead Line etc., complete with all lead an...

•

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete. et...

•

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directio...

•

Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and wat...

•

Earth work excavation for Foundation by mechanical means for all works & upto required depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...

•

Providing casing embankment using semi-pervious / pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations ...

•

Providing impervious filling adjacent to masonry / concrete structure and filling trial pits with soil available in adjacent area in layers of 100 to 150 mm and compacting each layer to density contro...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging ston...

•

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all othe...

•

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

•

b)Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as ...

•

20) Dewatering Pump (Diesel) b) Dewatering Pump (Diesel 25 hp) etc., complete with all lead and lifts and including loading and unloading charges and all other charges as per the direction of Engine...

•

a)Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/c using 8 mm dia vertical 4...

•

Providing rubble / boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming and all other ancillary operations complete. etc., co...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt crushed g...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works upto required heigh...

•

Providing and laying in position Cement Concrete M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation wor...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

•

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Design, fabrication, supply, erection and commissioning of trash racksconsisting of a number of panels of suitable height with vertical trashbars welded to structural steel frame at wider interval and...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

detailed_specification.doc

Others - specification • 0.61 MB

Royalty Rate 2025.pdf

Others - ROYALTY • 4.03 MB

KW-4_CHIKKALAKI LIS 4.11.2025 (1). (1).docx

Tender Document • 5.23 MB

Chikkalaki Drawing.pdf

Others - Drawing • 0.92 MB

general_specifications_admin.pdf

Others - specification • 0.20 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Lift Irrigation Scheme

Construction of 33KV Sub Station of Chikkalaki Lift Irrigation Scheme In Jamakhandi Taluka of Bagalkot District.

Minor Irrigation Department

Minor Irrigation Division Vijayapura | Karnataka

Amount: ₹3.7 CrCloses: 17 Nov 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published7 Nov 2025
Closed17 Nov 2025
Retendered7 Nov 2025