SPECIAL REPAIRS TO BLDG NO.5 (JCO MD ACCN) AT JN ROAD KAMPTEE

Amount

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor & paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles, complete all as specified and directed.

Dismantling of 100 mm dia cast iron pipe or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches , if required, complete all as specified and directed.

Dismantling of 150 mm dia cast iron pipe or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches , if required, complete all as specified and directed. Note for item Nos 4 & 5 :- Rate quoted is deemed to include earthwork excavation.

Taking up or down steel tubing 15mm dia bore and connections including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing 20mm dia bore and connections including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails , complete all as specified and directed.

Dismantling of asbestos cement sheets (translucent sheet corrugated/ semi-corrugated) in roof coverings incl ridges, complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blankets, any thickness incl cover fillets, complete all as specified and directed.

M&L for non-asbestos designer fiber cement building boards of size 595x595x4mm fixed or laid/inserted to GI frame work with screws/clips as in ceiling laid flat or sloping , complete all as specified and directed. Note : GI frame work will be measured and paid for separately.

Providing and fixing snap grid for false ceiling of size 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections @ 90 grams/ sqm both side inclusive, consisting of main 'T' runner with suitably spaces joints to get required length and of size 24mm X 38mm made from 0.25 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24 mm x 25 mm x 1200 mm made of 0.25 mm thick (minimum) sheet, 1200mm long spaced between main 'T' at 600mm centre to centre to form a grid of 1200 x 600mm and secondary cross 'T' of length 600mm and size 24mm X 25mm X 600mm made of 0.25 mm thick (minimum) sheet to be interlocked at middle of the 1200 X 600mm panel to form grids of 600 X 600 mm and wall angle of size 24mm X 24mm X 0.4mm including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27 X 37 X 25 X 1.0 mm fixed to ceiling with 12.5mm dia and 50m long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 X 30 X 0.5mm spaced at 1200mm c/c along main "T", bottom exposed width of 24mm of all T sections/ wall angle shall be pre-painted with polyster paint for all heights as per specifications, drawings, complete all as specified and directed.

Dismantling water tank of capacity exc 250 & n exc 500 ltr and removing to store of any description , complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) 500ltr hoisted and fixed in position, complete all as specified and directed.

Taking down Chowkats or frames incl. shutters (without taking off shutters from the frames) n. exc 1.50 Sqm each, complete all as specified and directed.

Taking down Chowkats or frames incl. shutters (without taking off shutters from the frames) exc 1.50 Sqm and not exc 4 sqm, complete all as specified and directed.

Taking down shutters of any description n. exc. 2.00 Sqm, complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6(Using old size brick), complete all as specified and directed.

M & L for brick work with fly ash brick, straight or curved on plan to any radius built in half brick thick wall built in cm 1:4 (Using old size brick), complete all as specified and directed.

Material & labour for Rendering 15 mm thick in cm 1:4 on brick or concrete surfaces using water proofing liquid compound as per manufacturer instructions, and finishing surfaces even & smooth without using extra cement, complete all as specified and directed.

Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement , complete all as specified and directed.

Material & labour for Rendering 5 mm thick CM 1:3 on brick or concrete surfaces of ceiling /chajja's finished even & smooth without using extra cement , complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub-base, under floors and pavings , complete all as specified and directed.

Material & labour for joint free colour ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement to match over and incl.15 mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

Ditto all as per item Sr. No 25 above but in skirting/dado incl.10mm thick backing coat in CM 1:4 finished even and fair, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mmx450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile and including 10mm thick backing coat in CM 1:4 finished even and fair, complete all as specified and directed.

M&L joint less non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over & including 15 mm thick cement screed in CM 1:4, complete all as specified and directed.

M & L for 2nd class soft wood boarding 20 mm thick planed one side and edges tounged & grooved or rebated fixed to timber frame work with nails , complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Material & labour plain cement concrete Type 1:2:4 B0 (using 12.50 mm graded stone aggregate) as in coping, haunching rounded or chamfered on edges including necessary form work, complete all as specified and directed.

Supply & fix 100 mm dia cast iron soil waste & vent pipe in any length with or without ears with cement joint, fixed to wall with MS clamps 50x5mm etc, complete all as specified and directed.

Supply & fix 75 mm dia cast iron soil waste & vent pipe any length with or without ears with cement joint fixed to wall with MS clamps 50x5mm etc, complete all as specified and directed.

Supply & fix CI bend 100 mm bore (any radius) diminishing pieces or tappers(larger bore to be measured), complete all as specified and directed.

Supply & fix CI bend 75 mm bore(any radius) diminishing pieces or tappers(larger bore to be measured), complete all as specified and directed.

Supply & fixing CI branch piece single 100 mm dia (equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches , complete all as specified and directed.

Supply & fixing CI branch piece single 75 mm dia (equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches, complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth, complete all as specified and directed.

Supply & fix GI tubing 15 mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors, complete all as specified and directed.

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors, complete all as specified and directed.

Material & labour PCC (1:3:6) Type C1 (using 20 mm graded stone aggregate), 75 mm thick as in plinth protection and finishing surfaces even & smooth without using extra cement including mist filling in the joint, complete all as specified and directed.

S & F CI Nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) , complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.

S & F in repairs stainless steel kitchen sink 1.00 mm thick for kitchen with plugs, washer and waste 32/40mm dia incl bedding in cement mortar on to dwarf wall or including fixing cantilever cast iron brackets and connecting union to waste pipe overall all size 495mmx420mm bowl size 410x330x160mm, complete all as specified and directed.

Supply only PVC valve less syphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve float and handle including bracket(incl.taking down old cistern ) and fixing of PVC flush pipe 32 mm dia and PVC connection pipes, complete all as specified and directed.

Supply only flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern, complete all as specified and directed.

Supply only PVC connection 15 mm dia, 450 mm long including brass ferrules on both ends, complete all as specified and directed.

Supply only low density PVC pipe 32/40 mm dia as in waste pipe to sink, complete all as specified and directed.

S & F stack clamp made out of 50x5 mm flat iron and 16 mm dia round iron stays incl bolts & nuts and securing ends of stays to wall for 75 mm bore, complete all as specified and directed.

Ditto all as per item Ser No 50 above but for 100 mm bore, complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size, complete all as specified and directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed , complete all as specified and directed. make seiko

S&F 15mm dia of pipe stop valves, fancy type and chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed, complete all as specified and directed. make seiko

S&F Pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed. make seiko

S&F in repair Vitrous china wash basin, white, flat back, size 450x300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and fixing of flush pipe, waste fitting, PVC connection and pillar tap, complete all as specified and directed.

Supply only liquid integral water proofing admixture of make pidilite or its equivalent (for external plastering & Sunken floors), complete all as specified and directed.

Material & labour for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of cement primer, complete all as specified and directed.

Material & labour for preparation of old plastered surfaces of wall & applying two coats of cement base paint, complete all as specified and directed.

M & L for preparation of new surfaces of wall & applying two coats of oil emulsion distemper over a coat of Birla white wall care putty, complete all as specified and directed.

M & L for complete removal of existing treatment of surfaces of wall & applying two coats of oil emulsion distemper over a coat of Birla white wall care putty, complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of old decorated surface on walls and applying two coat of white wash, complete all as specified and directed.

M&L for Preparation of old wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint, complete all as specified and directed.

M & L for preparation of old steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over coat of primer, complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint, complete all as specified and directed.

Supply & fix 40 mm dia GI pipe med grade spout to WC bath including cutting/making holes through wall for sunken floor, complete all as specified and directed.

S & F 18 mm thick pre-laminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in Cup Board shutters, complete all as specified and directed.

Ditto all as per item Ser No 71 above but 12 mm thick and pre-laminated both sides with decorative choice laminations as in Cup Board partitions, complete all as specified and directed.

Extra over block board of veneered particle board for external teak wood lapping 6 mm thick on 19mm thick, complete all as specified and directed.

Ditto all as per item Ser No 73 above but on 12 mm thick, complete all as specified and directed.

S & F S&F mild steel in wind ties for roof including securing bolts, Angle iron post and struts in fencing including cutting tops to shape as directed, drilling hole, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290(Gde E-165) , complete all as specified and directed.

S & F 75 mm hasp & staple safety type aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screw, complete all as specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10 mm dia as tle bar complete confirming to Fe-290 (Gde-165) etc, complete all as specified and directed.

S&F factory made Plain framed panelled shutter 35 mm thick (two panel) with lock rail and panel 12 mm thick veneered particle board with commercial veneering on both side the size of rail and stiles as per IS:1003(Part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F flush shutters solid core construction with block board core and plywood face panels commercial type on both sides 30 mm thickness, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30 mm thick (Stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per drawing shown on SSR, complete all as specified and directed.

Supplying and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc, complete all as specified and directed.

S&F steel window with side hung shutters ( glaze & gauze shutter) including projecting or box style hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc, complete all as specified and directed.

Ditto all as per item Sr No 83 above but without glazing bars, complete all as specified and directed.

S&F framed guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 410-O or FE 310-0, complete all as specified and directed.

S & F 100 mm long Mild steel medium weight cold rolled butt hinges and fixed with screw/welded to frames etc, complete all as specified and directed.

S & F Aluminium handles cast type 150 mm long, complete all as specified and directed

S & F Aluminium handles cast type 125 mm long, complete all as specified and directed

S & F 150 mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S & F 100 mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolts with hasp and staple (bolt type) and filing clips of sheet, cast or extruded sections and fixing bolds and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

Hacking out old broken glass any thickness size and quality from wooden/steel frames etc, complete all as specified and directed.

S & F sheet glass ordinary quality, 3 mm thick and glazing with oil putty in square n. exc. 0.50 Sqm in each pane, complete all as specified and directed.

S & F 3 mm figured glass, pin head type and glazed with oil putty in sqm n exc 0.50 Sqm in each pane, complete all as specified and directed.

S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F for 25mm dia curtain rod of approved quality including cutting and fixing to curtain brackets, complete all as specified and directed.

S&F for fancy type curtain brackets of approved quality fixed to wall with screws, complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 24x36x10 inch, minimum thickness of steel sheet 0.8mm, including necessary drilling, fixing with screw, plugs in kitchen etc, complete all as specified and directed. Make:- Nirali / Prayag / Anjali.

S&F CP Towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms), complete all as specified and directed.

M&L for chequered cement concrete tiles 20 cm x 20 cm x 25mm thick set, including screed bed or bedding layer 15 mm thick mortar in CM 1:4 finished even and smooth for laying floor finishes, jointed and pointed in neat cement slurry in floor with grey cement and no pigment, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20 to 25mm thick laid over and including 20mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified and directed.

M&L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed/backing coat 15mm thick in CM 1:4 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified and directed.

Taking out existing unserviceable wooden wardrobe including chowkhat of overall size 1000mm x 1900mm approx from existing position of married & single accn including supply & fixing steel wardrobe including chowkhat of same size at the same position in Md and single accn complete all as specified and directed to ensure proper & smooth functioning of wardrobe to the entire satisfaction of Engr-in-Charge. The overall outer size of chowkhat will be 1000mm X 1900 mm approx, made with 0.5mm thick plain black MS sheets and overall shutter size of wardrobe 945mm X 1845 mm (approximate) having 2 shutter, 06 Nos of 75 mm long medium weight MS butt hinges and one number approved quality chromium plated MS handle & one number MS lock of approved quality CP of Godrej pattern with key in duplicate. Thickness of all MS sheets to be used in wardrobe for any purposes including chowkhat, shutter, bracing and back etc except shelves shall be of 0.5mm thick and 02 numbers shelves of size 1.00 x 0.5m approx made of 1mm MS sheet shall be fixed suitably and properly with rivet / welds for storing clothes etc in wardrobe. 01 No MS approved pattern tie hanger shall be fixed in one shutter. One number MS peg set of three shall be fixed in other shutter of wardrobe. 18mm dia MS conduit pipe chromium plated with suitable & approved quality bracket will be fixed to both gable wall of wardrobe. Suitable pattern MS sheets bracing to shelves and shutters shall be provided to avoid any sagging and other related problem in smooth functioning and proper use of wardrobe. All cement plaster, brick wall, PCC, RCC etc disturbed during dismantling of wardrobe shall be made good in cement motor 1:3 properly as per site condition and technical requirement all as directed by Engr-in-Charge. In the bottom portion of wardrobe (of size 1.0 x 0.60 m approx) 7mm thick glazed tile exc 0.06 sqm and n.exc 0.11 sqm of approved colour and shade shall be laid over and including screed bed of 15mm thick in CM 1:6 incl filling the joint with matching colour of tiles. In the sides (of size 0.58 x 1.88m approx each) and back portion of wardrobe (of size 1.0 x 1.88 m approx) 350x450x7mm thick glazed tile of approved colour and shade shall be fixed over and including backing coat of 10mm thick in CM 1:4 incl filling the joint with matching colour of tiles. Inside surface of ceiling of wardrobe (of size 1.00x0.60m approx) shall be finished with two coat of OBD over a coat of Birla white wall care putty after making good surface properly. Chowkhat will be fixed with suitable raw plug with and CP steel screw inside wall etc & adjacent surfaces shall be made good to match with adjacent finishing surfaces properly as required and directed for entire completion of work. All steel surface will be painted with two coats of synthetic enamel paint with approved shade and colour, by spray painting over one coat of red oxide primer including preparation of surfaces complete. All other misc work will also be carried out for entire completion and smooth functioning complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes, complete all as specified and as directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces, complete all as specified and as directed.

Taking down carefully unserviceable sub main wiring of any size/capacity and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch.(Cable Make : Finolex, L&T, Legrand, Havells, Polycab) (PVC Conduit Make : Polycab, Anchor, Finolex) Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Ditto all as per item Sr. No. 107 above but One ceiling /exhaust fan point controlled by one switch and regulator, complete all as specified and as directed.

Ditto all as per item Sr. No. 107 above but One 3 pin 5 amp socket out point on the same board with other switches, complete all as specified and as directed.

Ditto all as per item Sr. No. 107 above but One 3 pin 5 amps socket out let point on independent board, complete all as specified and as directed.

Ditto all as per item Sr. No. 107 above but One bell/buzzer point controlled by one bell push, complete all as specified and as directed.

Ditto all as per item Sr. No. 107 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and as directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x10.0 Sqmm with earth wire of 1x10.0 Sqmm. (Cable Make : Finolex, L&T, Legrand, Havells, Polycab) (PVC Conduit Make : Polycab, Anchor, Finolex) Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

Supply and fix Modular switch one way 6A, 1 module, complete all as specified and as directed. Make : Anchor Roma, Legrand, Crabtree

Supply and fix Modular Socket 6A 2/3 pin combined 2 module , complete all as specified and as directed. Make : Anchor Roma, Legrand, Crabtree

Supply & Fix Modular Socket 6A/ 16A 3 pin , complete all as specified and as directed. Make : Anchor Roma, Legrand, Crabtree

Supply & Fix Modular Socket 6A/ 16A 2/3 pin combined 2 module , complete all as specified and as directed. Make : Anchor Roma, Legrand, Crabtree

Supply and fix ceiling rose surface type 2/3 terminal 5 amps, complete all as specified and as directed. Make : Anchor Roma, Legrand, Crabtree, complete all as specified and as directed.

S&F Bell ding dong, AC 230 volts, single phase, complete all as specified and as directed.

Supply and fix Modular bell push 6A, 1 module , complete all as specified and as directed. Make :Anchor Roma, Legrand, Crabtree

Supply and fix Modular Fan step regulator,120 watt 2 module, complete all as specified and as directed. Make : Anchor Roma, Legrand, Crabtree

Supply and Fix Highly durable surface mounted 18/22 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories, complete all as specified and as directed. Make :- CG LDL-20-CDL/ Philips BN021CLED22S/ Wipro LL20-281-XXX-65-AL-1

Supply and Fix Highly durable surface mounted 09/11 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories, complete all as specified and as directed. Make :- CG LDL-10-CDL/ Philips BN021CLED10S/ Wipro LL20-111-XXX-65-NE-3

Supply & fix lamp holder insulated body with back plate for angle/batten fittings, all as specified and as directed. Make :- Anchor/ bajaj

Supply & fix light fitting 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ , complete all as specified and as directed. Make: CG LBHP-10-CDL/ Philips/ Wipro.

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc., complete all as specified and as directed by Engineer-in-Charge. Make : CG LSTS-25-CDL-M/ Philips/ Wipro.

S & F Exhaust fan single phase,200/230 mm sweep, metallic with bolts, nuts, washers and connected electrically, complete all as specified and as directed by Engineer-in-Charge. Make : Orient/ Havells/ Crompton.

Supply & fix MCCB 4 Pole, 40 Amps, 16 KA, 415 Volts, with sheet metal enclosure flush/surface mounting complete all as specified and as directed. Make:- Legrand / L&T / Schenieder

Supply & fix MCB DB SPN 8 Way, 240 Volts, with 200 Amp rated bus bar flush/surface mounting double door type, complete all as specified and as directed. Make : Legrand/ L&T/ Schenieder

Supply & fix MCB TPN 40 to 63 Amps, breaking capacity 10 KA, 240 Volts, complete all as specified and as directed. Make : Legrand/ L&T/ Schenieder

Supply & fix MCB SPN 6 to 40 Amps, breaking capacity 10 KA, 240 Volts, complete all as specified and as directed. Make : Legrand/ L&T/ Schenieder

Supply & fix MCB SP 6 to 40 Amps, breaking capacity 10 KA, 240 Volts, complete all as specified and as directed. Make : Legrand/ L&T/ Schenieder

Material and Labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth lead wire 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, medium grade 7.5m long as applicable and as per plate No. 3 of SSR Part-I 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover or reinforcement with 8mm TMT bars at 100mm c/c both ways with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 15mm nominal bore medium grade GI protection pipe upto 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.52,680.00/- ]

khushal constructions

M/S L M Chourasia

DE PRETTY AND CO

M/s M.G. Hargunani

Bidder Name

DE PRETTY AND CO

M/S L M Chourasia

khushal constructions

VIJ ASSOCIATES

M/s M.G. Hargunani