PROVN OF UNDERGROUND ELECTRICAL WIRING INSIDE CSD DEPOT LUCKNOW UNDER GE (WEST) LUCKNOW

Amount

M & L for Dismantaling of over head ACSR (Aluminium Conductor Steel Reinforced) any type & size from exisiting pole complete all as specified and as directed.

M & L for Dismantling stay assembly complete all as specified and as directed.

M & L for Dismantling insulators any type, any size from exisiting poles after opening nut , bolts, and removing from site complete all as specified and as directed.

M & L for Dismantling cross-arms of M.S. channel or angle sections etc. complete all as specified and as directed.

M & L for Dismantling steel poles/ struts, any size and setting aside complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cespits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out & getting out in soft /loose soil complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and as directed

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and as directed

Supply and laying sand cushioning for the purpose intrenches and laying of cables in duct/trench including and consiolidation complete all as specified and as directed.

Material and labour for sub class `B’ bricks old sizes designedtion 75 old size, over the HT/LT cable laid flat for protection of cable complete all as specified and as directed.

M&L cutting PCC/floor/road and making good, including material as per existing after laying of pipe for cable protection complete all as specified and as directed.

M & L steel tubular swaged pole 09 metre long complete with cast iron base plate finial taper plug ,bolts, nuts and screw all as specified type 410, SP-31 includuing painting up to 1.5 M above PCC coping in black and white strips 5 Nos each 30 CM high staring from bottom of pole and two coats of epoxy based paint alumimium grade finish to remaining external surface over one coat of suitable primer complete all as specified and as directed. Note: excavation and foundation concrete will be measuredand paid for separately under relevant item.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete including form work for poles complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in base concrete for poles and foundation filling and including form work for poles complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping including form work for poles complete all as specified and as directed.

M&L danger notice boards/plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bone in signal red colur and fixed with MS clamps. bolts and nuts of approved size for LT 200X150mm size with voltage & danger indicated in Hindi & English complete all as specified and as directed.

Supply,Laying and testing XLPE insulated armoured heavy duty with aluminium conductor, 1100 volts grade cross sectional area 120 sqmm 3.5 core complete all as specified and as directed.

All As per Item No 17 Above but size of 95 Sqmm x 3.5 Core (For Main Panel to sub Panel No - 01 & 02) complete all as specified and as directed.

All As per Item No 17 Above but size of 70 Sqmm x 3.5 Core (For Main Panel to sub Panel No - 03 & Adm Bldg) complete all as specified and as directed.

All As per Item No 17 Above but size of 50 Sqmm x 3.5 Core (For Main Panel to High Mash Panel No - 01 & 02) complete all as specified and as directed.

All As per Item No 17 Above but size of 25 Sqmm x 4 Core (For sub Panel No - 01, 02 & 03 to various Bldg DB) complete all as specified and as directed.

All As per Item No 17 Above but size of 16 Sqmm x 4 Core (For Panel various Bldg and pole Security light) complete all as specified and as directed.

All As per Item No 17 Above but size of 10 Sqmm x 2 Core (For Panel to street light) complete all as specified and as directed.

M & L of GI pipe light grade of 80 mm dia base in trenches/poles/walls for protection of cable including fittings complete all as specified and as directed.

M & L of GI pipe light grade of 40 mm dia base in trenches/poles/walls for protection of cable including fittings complete all as specified and as directed.

M & L Earthing for poles and other machinery/eqpt using GI strip as earth lead of size 32x6 mm and MS galvanized steel earth plate electrode 600x600x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32x6mm as earth lead with GI pipe, 40mm dia with nuts, bolts and washers complete upto and including test point made out of 40x3mm GI flat, PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protection with GI funnel complete all as specified and as directed as shown in electrical plate No 3 of SSR Part-I 2009. Note:- 1. Excavation ,Returning/filling and Removing of surplus soil is deemed to be included in the quoted rate. 2. PCC pit,RCC Pit cover with funnel & wire mesh water pipe ,test point & GI strip/ wire, protection of pipe deemed in the quoted rate. (for Panel and High Mast light ) Earth lead including GI Strip of size 32x6 mm protection pipe upto 7.50 mtr included in the rate quoted for item.

S & F in replacement of GI pipe light grade, 32 mm bore, 1.20 mtr long bend in required shape, MS clamp 40x3mm thick duly painted with two coats of synthetic enemal paint fixed onpole including bolts and nuts complete all as specified and as directed.

S&F press moulded SMC Junction box of inner demensions 200 x 140 x 95 mm ,suitable for 3 Nos cable entry including 8 way connector, 32 Amp -01 No MCB SP 230 volt AC 50 Hz 10 KA - 01 No weather proof cable connection 2 x 2.5 Sqmm copper conductor from MCB to Street light fitting and suitable fittings and fixtures complete all as specified and as directed. Make:- Sintex , Cat Prt No GSJB- 2014) or equivalent in Hensel as approved by Engr-in-Charge

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant, 120 lumens /watt, IK 07, IP -66 incl 10 KV inbuilt surge protection, complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete all as specified and as directed.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with 120 lumens /watt, IK 07, IP -66 incl 10 KV inbuilt surge protection, with impact and corrosion resistant complete with driver complete all as specified and as directed.

Supply, fixing, testing and commissioning of 15/16 Mtr, high mast shaft and 20 side polygonal in two sections,suitable for 50 m/sec wind speed, material construction S 355 grade as par BS- EN10025 and standard of galvanization as per BS EN ISO-1461 including fixing arrangement, foundation bolts grouted in RCC foundation as OEM recommendation including necessary civil work etc complete with fixing arrangements for 09 Nos 200 Watt LED symmetrically fixed along with their control gear and having two point suspension system with steel wire rope of 6 mm dia braking cap 2350 kgx2, raising lowering comprisonn & double drum winch with luminaire mounting arm, pully assemble with electric motor as recommanded by OEM and manualy operated, aviation obstruction light,lightining arrestor spike including RCC foundation necessary coping, LT panel board with suitable incomer MCB and outgoing MCBs incl with timer switch, with complete wiring of suitable wire complete all as specified and as directed.Note:- (i) Foundation and fixing of high Mast shall be carried out as per OEM recommandation (ii) Incl LED flood light 200 watt 230 V AC outdoor type dia cast alluminium housing 120 lumens /watt, IK 07, IP -66 incl 10 KV inbuilt surge protection with driver and heat resistant, for high mast light, complete all as specified and as directed. (a) Supply and fixing of foundation bolts not less than 8 Nos of 30 mm dia manufactured from special steel along with nuts,bolts, washers, anchor plate not less than 25 mm thick and common template (as per manufacture's recommendation). (b) Supply and fixing of LED aviation obstruction lights from reputed approved manufacturer/specified make - 01 No (c) Supply and fixing of lightning arrester spike with one No. of heavy duty hot dip galvanised spike of min 1.2 mtr length, incl earthing lead up to earth test point (d) Supply and fixing of outdoor stand mounted feeder pillar factory made, with 3.15 mm CRCA sheet, aluminium bus bar with 63 A TPN MCCB as incomer and single dial time switch, 25A TPN contactor for the automatic switching of luminaries, power control with 2 Nos 9 Amps contactors and raise, lower push button.(As per manufacturers recommendation) and Installation of the mast feeder pillar by grouting the stand in concrete. (e) M&L for Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated, PVC sheathed, ISI marked, flexible cable of specified make like Finolex/ Palza/ poycab/Havels of suitable copper conductor of 3 core x 1.5 sq. mm, lugs, MCB, electric connection from bottom to top of of high mast shall be provided through special traling cable. The cable shall be FRP insulated copper conductor of min 5 core x 2.5 Sqmm. Supply to motor shall be provided from pillar feeder through 4core x 4.0 Sqmm copper stranded armoured cable. NOTE : (i) Contractor shall take all safety precaution for erection, installation and testing of high mast .(ii) Excavation and earth work and PCC in faoundation shall be incl above quoted rate. (iii) Drawing of High Mast shaft and panel will be approved by Engineer- in-Charge.

Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etc complete all as specified and as directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls complete all as specified and as directed.

Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surface of walls complete all as specified and as directed.

M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed at site for the following:-(NOTE: Switch and socket to be measured and paid for separately):- (a) One light/fan point controlled by one switch

One socket outlet point 5 Amp on an independent board complete all as specified and as directed.

Same as item No 37 but on the same board complete all as specified and as directed.

All as item No 38 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board complete all as specified and as directed.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and as directed.

S & F switch piano flush button single pole one way 15 Amps complete all as specified and as directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified and as directed.

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and as directed.

S & F ceiling rose surface bakelight two to three terminal complete all as specified and as directed.

S&F fan regulator electronic, step up socket type, 230 volt and conection complete all as specified and as directed.

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed. Makes shall be provided group A cat as per latest approved make given by HQ CECC

Taking down ceiling fan 1200/1400 mm sweep any type and refixing after oiling, gressing and painting with writing the MRES no including electroic connetion work complete all as specified and as directed.

Taking down Exhaust fan 350/450 mm sweep any type and refixing after oiling, gressing and painting with writing the MES no and any reqd of anchor fastner nut bolt washer , including electric connetion work complete all as specified and as directed.

S & F MCB DB TPN 4 Way (Vertical Type) double door, for mounting, MCBs, isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 42 protection class complete all as specified and as directed.

S&F in repair MCCB 100 Amp 415 V, 4 pole, breaking capacity 16 KA, complete all as specified and as directed.

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 8 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified and as directed. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)

M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and as directed. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and as directed. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

S&F in repair MCB, single pole & neutral, 240 Volts (40 to 63 ) Amps,10Ka complete all as specified and as directed.

S&F in repair MCB, single pole, 240 Volts (20 to 40) Amps,10Ka complete all as specified and as directed.

M&L for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 m below normal GL with the top edge of the plate not less then 1.5 m below the normal GL connected to GI wire 4mm dia protected by 15mm GI pipe (light grade) and watering pipe 20mm bore GI pipe (light grade) and chamber with PCC (1:4:8) type D2 using 40mm graded stone aggregate, coping with (1:3:6) type CI using 20mm graded stone aggregate and with RCC pit cover (50 mm thick) in 1:2:4 type B1 using 20mm stone aggregate, reinforced with 8mm for MS bar at 80mm c/c both way in lieu of CI pit cover with angle iron frame including excavation and earth work and removal of surplus soil of earth complete all as shown in electrical plate No 3 of SSR Part I and including charcoal dust, common salt and earth lead connected to earthing test point testing of earthing complete all as specified and as directed. NOTE: Main earthing lead and protection GI pipe from earth electrode to test point up to 7.5 m is to be provided and the cost for the same shall deemed to be included in the above quoted rate. (foe MCB DB's)

Eco Creations

M K Engineers and Contractors

VIDYA TRADERS

Ajanta Motor Store