SPL REPAIR TO TOILETS AT GROUND FLOOR AND CERTAIN BLDG OF HOSPITAL UNDER GE SOUTH MAMUN AT MAMUN MIL STN

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismanling of existing roof sheets any type complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick and 600 mm width of an ecofriendly colour having tensile strength of 550 Mpa as in riges/vally, fixed with self tapping screws including dismanling of existing ridge complete all as specified and directed.

S&F False ceiling of 8 to 9 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders/Hangers 4 mm dia. G.I. wire (upto1200mm length) adjusting level fixed to roof slabes/trusses complete all as specified standard galvanised sections in a grid size of 600x600mm including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Vitrified ceramic coloured tiles of light shade 10 mm thick square/rectangular) polished area of each tile n. exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Non - skid Joint free coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over 15 mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough complete all as specified and directed.

M & L for Marble Green/Bhaisiana Zebra 18 to 20mm thick (table rubbed and premirror polished) in single piece in steps (tread and risers) and floor jointed in neat cement slurry including pointing in epoxy grout to match marble shade, laid over and including 15mm thick screed bed in CM 1:4 or 10 mm thick backing coat in verticle surfaces complete all as specified and directed incl rounding edges and demoliition of existing stone slab of any type and description

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sq.m with shutter (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames n. exc 1.5 sqm but with shutter (without taking off shutters from the frame) complete all as specified and directed.

S & F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately) Note : For WPC Solid door/ window frames minus 5mm tolerance in demension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge Note Stainless steel butt hinges and necessary SS screws shall be paid separately)

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge. Note Stainless steel butt hinges and necessary SS screws shall be paid separately)

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 incl taking down existing all as specified and directed

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket and filling the gap between frame and finished wall/tile with weather proof silicon sealant etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F powder coated (min thickness of powder coating 50 micron) Anodised aluminium Window shutters sliding type (Three track) , aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, push button locking system in each panel of shutter, anodised aluminum snap beading screws etc. with in built roller track and sash and touch locks with hooks, necessary filling up of the gaps at junctions, ie at top, bottom and sides with required EPDM rubber, neaprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per the directions of Engineer-in-charge

S&F powder coated (min thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per the directions of Engineer-in-charge

S&F powder coated (min thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per the directions of Engineer-in-charge

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- in-Charge.

S&F 3mm thick ACP sheet of approved colour as in doors, windows and partitions fixing with Aluminium beading or as per manufacturers instructions incl joint filling and tapping with necessary arrangement complete all as specified and directed.

S& F in repair 18 mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet for cupboard / Kitchen cabinet shutters and frames having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 kg/ cum and the weight of sheet of 1 sqm should be 11 kg (+/- 5%) manufactured by ISO 9001-2015 certified company. the sheet should be 100% water proof, termite proof, fire retardant, manufacured by single layer extrusion process with excellent screw holding capacity and shore D hardness. complete all as specified

M & L for 4.8 mm thick sheet glass (for Doors) , ordinary quality in square or rectangle exc 0.5 sqm each pane fixed to framed work complete all as specified.

M & L for 3 mm sheet glass (for windows) , ordinary quality in square or rectangle n. exc 0.5 sqm each pane fixed to framed work complete all as specified.

M & L for 3 mm Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed to aluminium framed work (venilators) complete all as specified.

S& F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

S & F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S & F 100 mm long stainless steel Butt hinges fixed to frames complete all as specified and directed.

S & F 150 mm long aluminium anodised, barrel tower bolts of ex- truded section and fixed complete all as specified and directed.

S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Mild Steel Mortice lock (5 lever) , vertical type, size 100 mm with minimum 03 No of keys fixed to doors with necessary cutting to doors complete all as specified and directed

S & F 30 mm flap Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

M&L 100 mm Hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Stainless steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/all beads complete all as specified and directed.

S&F magnetic ball catcher for cupboard shutter incl fitting to cup board shutters/frame as required, complete all as specified

S&F floor door stopper of overall length of cover plate 150mm alluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repair Aluminium (Die Cast) Body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L for 20mm thick cement plaster on concrete surfaces of roof top in cement mortar 1:4 finished even and smooth using WPC liquid as per manufacturer instruction @ 200ml /50 kg of cement after sweeping/brushing clean & washing down with water incl taking down existing plaster complete all as specified & directed. Note Water proofing compound shall be measured and paid for separately under respctive item.

M & L for APP modified roof treatment over existing accessible/non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) cleaning the top surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching, floor by maintaining required gradient / undulation etc slightly rounded or chamferred angles and throating, complte all as specified and directed.

S&F in repairs Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting to trap and to flush pipe etc, complete all as specified and directed.

S&F GI pipe 25mm dia light grade (in short length) as spout pipe in sunken floor slab laid in slope through brick wall with PCC (1:2:4) type B-1, outer end of sprout pipe cut in an angle complete all as specified.

Material and labour for Rendering 15mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:4) including using WPC liquid as per manufacturer instruction @ 200ml /50 kg of cement to sunken portion with proper slope towards outside and finishing cement concerete or brick work surface even and smooth using extra cement including application of APP based polymeric membrane minimum weight 3Kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid over primed surface by forced application complete all as specified and as directed by Engr-in-Charge Note: Water proofing compound shall be measured and paid for separately under respctive item.

Supply only integral water proofing compound.

S&F Vitreous China half stall urinal, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl CP Waste coupling (half or full threaded) (Minimum weight 32mm-350gms suitable for urinals of 32 mm bore dia incl CP Urinal spreader of for fixing with 15 mm dia pipe. (Minimum weight 350gms) complete all as specified and directed.

S&F in repair Bib taps with flange for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed complete all as spd and directed.

S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

S&F in repair Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

S&F in repair 15 mm Brass CP mixer for mixing hot & cold down for iron pipe and fixed with aerator complete all as specified.

S&F in repair 15 mm Brass CP central hole Wash Hand Basin mixer for mixing hot & cold with aerator down for iron pipe and fixed complete all as specified.

S&F in repair towel rail CP 600 mm long complete all as specified and directed.

S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

S & F in repairs Vitreous china wash basin of size 550x400mm, white flat back, including 32mm dia PVC waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed fixed in repair including waste coupling 32mm size full thread, all as spd and directed

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S& F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified.

S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and directed.

S&F Stainless steel Grating doom 100mm dia with waste hole complete fixing in floors complete all as specified and directed.

S&F Stainless steel Grating doom 100mm dia complete fixing in floors complete all as specified and directed.

M&L for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified incl demolition of existing cement concrete complete all as specified and directed.

S& F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S& F PVC corner shelf assembly consisting fixing with chromium plated brackets guard complete all as specified.

S&F in repair Brass Chromium plated Soap Dish fixed with and incl CP screws all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes of any dia jointed in cement mortar and taking out of trenches or walls if required etc as directed

M&L 100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,laid in trenches or in floors etc complete all as specified

M&L 100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps complete all as specified and directed.

M&L 100 mm dia sand cast CI Bends with oval access door and jointed with neat cement paste complete all as specified and directed.

M&L 100 mm dia sand cast CI Bends and jointed with neat cement paste complete all as specified and directed.

S&F in reapirs Cast iron floor trap 100 mm with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs Cast iron floor trap 75 mm with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in reapirs Cast iron gully/nahani trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L 75 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors etc complete all as specified

M&L 75 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps complete all as specified and directed.

M&L 75 mm dia sand cast CI Bends with oval access door and jointed with neat cement paste complete all as specified and directed.

M&L 75 mm dia sand cast CI Bends jointed with neat cement paste complete all as specified and directed.

S&F Cast Iron Pipe 100mm dia, branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) as in repair, or with parallel branches all as specified.

S&F, Cast Iron Pipe 75mm dia, branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches as in repair, all as specified.

S&F 75 mm cast iron cowls complete all as specified and directed.

M&L 50 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed on walls with clamps complete all as specified and directed.

M&L 50 mm dia sand cast CI Bends with oval access door and jointed with neat cement paste complete all as specified and directed.

S&F Stack clamps out of 50 mm by 5 mm flat and 16mm dia round iron strip and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe fixed in repairs complete all as specified and directed.

S&F Stack clamps out of 50 mm by 5 mm flat and 16mm dia round iron strip including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe fixed in repairs complete all as specified and directed.

S&F Stack clamps out of 50 mm by 5 mm flat and 16mm dia round iron strip including bolts and nuts and securing ends of stays to wall or roof for 50 mm dia CI pipe fixed in repairs complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float including disconnecting existing water tank from roof slab/staging of single/double/triple storey building lowering complete all as specified & directed.

S&F tubes,15 mm bore 'medium grade' ISI marked galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections,including removal as spd and directed

S&F tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections,including removal as spd and directed

M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed.

S&F in repair 20 mm bore mild steel drapery rods with 1 mm thick Stainless steel including SS brackets and SS knobs fixing on windows and doors with rawl plugs for hanging curtains complete all as specified and directed. ;

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, urinal partions and like in 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl edge moulding to give high gloss finish complete all as specified and directed.

Taking down cement plaster hacking for key, raking out joints of old brick work built in cement mortar and scrubbing down with water etc. to receive plaster complete all as specified and directed.

M&L for 15 mm thick rendering in two layers (5 mm thick in CM 1:4 over 10 mm thick in cement mortar 1:6) mixing with liquid WPC @ 200 ml/ 50Kg of cement on brick or concrete surfaces and finished even and smooth without using extra cement including necessary scaffolding all as specified and directed Note: Water proofing compound shall be measured and paid for separately under respective item.

M&L for rendering 5 mm thick plaster on fair face of brick work or concrete surface as in ceiling in cement mortar 1:3, finished even and smooth without using extra cement, including necessary scaffolding complete all as specified and directed.

M&L 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement all as specified.

M&L for complete removal of existing treatment and preparation of old plastered or unplastered surface and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L prepairing new surfaces and finishing walls/facia with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall/facia surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls by applying 1mm thick wall care putty making the surface even & smooth and applying two coats of oil bound distemper, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls by applying two coats of oil bound distemper over a coat of chalk priming , complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls by applying one coats of oil bound distemper, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls, roof projection, ceiling, chajjas and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old plastered/unplastered surfaces of walls, roof projection, ceiling, chajjas and applying one coats of white wash, complete all as specified and directed.

M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6,including dismantling of existing brick work, complete all as specifiedand directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S& F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Preparing the new steel surfaces of any description over 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE 410W Gde E250 quality A complete all as specified and directed.

M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Demolition of cement concrete (Unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams incl demolition of existing concrete etc complete all as specified and directed

Formwork to chajjas,landing, balcony railing and similar work; (Horizontal or sloping) complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length, bent to shape required incl crancking bending and hooping ends all as spd and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

M&L for RCC type B-1 1:2:4 nominal mix (using 20 mm graded crushed stone aggregate) as in slab supported on walls, roofs beams complete all as specified

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, all as specified and directed

Rendering 05mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and smooth without using extra cement all as specified and directed

M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as specified and directed.

M&L Complete removal of existing treatment on surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorosent salts, trading oil and greasy spots and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on plastered surfaces of walls preparatory to distempering complete all as specified and as directed.

S&F in repair pillar tap cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing RCC/ PVC tank of any capacity complete all as specified & directed.

S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified & directed.

S&F PVC (SWR) pipes 110mm bore, double socket, in any length with rubber ring joints, in any length fixed to walls with and including clamps including taking down existing eaves gutters and rainwater pipes 100mm dia (any size or pattern) including all fitting,head,shoes, bend, swan-nacks etc complete all as specified and directed.

S&F in repair, Cast Iron Pipe 75mm dia, branch pieces, Double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors ISI marked complete all as specified & directed.

Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches , ceilling roses , holder , tube light , bulk head , pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good surfaces , wall, floors etc.)

M&L for modular point wiring for one light/fan/bell point controlled by one switch complete with 1.5 Sqmm multistranded FRLS PVC insulated unsheathed, FRLS, multistranded copper conductor cable 1100 volts grade (red, yellow & blue) in and including medium duty non metallic rigid PVC concealed conduit 20 mm dia including conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC (green) insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly including inner and outer frame plate matching with surrouding with modular sunken steel boxes zinc oxide plated of suitable size including modular sheets of suitable module and back plates etc. complete all as specified and directed.

M& L for Point wiring for one 2 way light point/ fan point/ bell point etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate size not less than 20mm dia,and with sunk cast iron for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified.

M& L for modular Point wiring for one socket outlet 5 Amp 3/5 pin for independent board etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate size not less than 20mm dia,and with sunk cast iron for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified.

All as per Sl item No 133 here-in-above but for one 3/5 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

All as per Srl item No. 133 here-in-above but for one 15 Amp independant socket outlet point using 2.5 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia,medium duty including sunken steel boxex of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 2.5 Sqmm (green colour) earth wire connecting to earth dolly .

All as per Srl item No. 133 here-in-above but for metal plug top of AC point using 4.0 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia, incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm (green colour) earth wire connecting to earth dolly .

S&F in repairs modular switch, one module, 1 way, 10 Amps 240 volts complete all as specified and directed.

S&F in repairs modular switch, two way, 10A, 240 volts, 1 Module complete all as specified and directed.

S&F in repairs modular socket 6A, 240 volts 2 & 3 pin, 2 Module complete all as specified and directed.

S&F in repairs modular socket, 6A & 16A, 240 volts, 2 & 3 pin, 2 Module complete all as specified and directed.

S&F in repairs modular switch, one module, 1 way, 16 Amps 240 volts complete all as specified and directed.

S&F ceiling rose, surface bakelite 65x50mm , three terminals, ISI marked complete all as specified and directed.

S&F in repairs modular step type fan regulator 120W, 240 volts, 2 Module, complete all as specified and directed.

S&F in repairs modular bell push 6A, 240 volts, 1 Module complete all as specified and directed.

Supply & fix in repairs LED tube light fittings (4 feet long), wall mounted 1x20 watt 6500K, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

S&F in repairs LED light fitting, mirror type with high out put diffuser, 2 feet,10 watt, 220 volt, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs building security LED light luminaire 30W, IP 66, IK-07, AC 230 volts, made up of pressure di-cast iron housing complete making connection using PVC insulated and sheathed3 core multi stranded copper conductor cable of size 0.50 Sqmm from ceiling rose including MS bracket made of 25/32mm GI pipe bent to shape, fixed to wall with clamps and nurs & bolts for mounting fittings complete all as specified and directed.

S&F in repairs LED Bulk Head luminaries, 10W complete with all accessories and including connector and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed.

S&F in repairs lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete complete all as specified and directed.

S&F in repairs LED Lamp of 9W, Base B22, BEE 3 Star with polycarbonate body and aluminium heat sink warm white complete all as specified and directed.

M&L of Bell, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

Taking down Ceiling fan/exhaust fan , sealing cable end, dismantling blades and removing fan and blades and re fix the same position after servicing including minor repairs by replacement of capacitor, safety pin, cap, nuts & bolts etc and making connection using 3 core, 0.50 sq mm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting & rewriting number complete all as specified and directed.

S&F in repairs sheet metal enclosure, single pole and neutral 240 volt, 20 to 32 Amps with two pin and earth plug and socket plug top complete with single pole MCB for geyser/ac complete all as specified and directed.

S&F in repairs sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar 12 way, 240 volts complete all as specified and directed.

S&F in repairs sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar 8 way, 240 volts complete all as specified and directed.

S&F in repairs MCB single pole and neutral, 40-63 Amps, 240 volts, C-series complete all as specified and directed.

S&F in repairs MCB single pole 6 to 32 Amps, 240 volts, B-series complete all as specified and directed.

S&F wall mounted bus bar chamber 415V, 3phase 4 wire, 50Hz AC supply system fabricated from stainless steel with 3mm thick for outer cell TPN aluminium bus bar of capacity 110 Amp 4Pole, 4 ways complete all as sirected by E-in-Charge

Supply, fixing and testing of exhaust fans AC single phase rated voltage 230V, not more than 50W, 1350rpm of size 300 mm sweep, Double ball bearings heavy duty motor, Protective bird guard is provided, steel body with louvre of Havells or equivalent in Bajaj/crompton greaves including connecting to ceiling rose and making hole in brick/stone masonary wall and provision of PCC 1:3:6 for making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including MS bolts 04 Nos for fixing exhaust fan all as required and directed.

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral) and run 6.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in rigid non metalic PVC conduit complete all as specified and directed by Engr-in-charge., (Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).

M&L for Earthing complete with galvanised steel earth plate electrode 600mmx600mm thickness not less than 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3 connected to earth test point/MCB DBs all as specified and indicated complete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected, complete all as specified & directed. Note:- 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in the unit rate quoted by the contractor. 2. Soil should be free fromstone, boulders, aggregate, gravels etc

Excavation in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and directed.

Returning filling in (soil) including spreading , levelling ,watering and well ramming in layers not exceeding 25cm thick all as specified and directed by Engr-in - Charge.

Removing exacavated materials (soil) to a distance not exceeding 50m away from the starting point and dipositing where directed at a level not exceeding 1.5m above all as specified and directed by Engr-In-Charge.

M& L for sand cushioning to the under ground cable complete as per SSr Part - I clause 19.75 all as specified and directed by Engr-In-Charge.

Material and labour for brick protection with sub class B bricks using old size bricks , laid dry, flat over cable , longer length of brick laid perpandicular to the cable in trenches all as directed.

M &L of XLPE insulated, armoured, heavy duty electric cable with aluminium conductor 1100volts grade, cross section area 70 sqmm 3.5 core complete all as specified and directed by Engr-In-Charge.

M &L of XLPE insulated, armoured, heavy duty electric cable with aluminium conductor 1100volts grade, cross section area 35 sqmm 3.5 core complete all as specified and directed by Engr-In-Charge.

S&F for galvanised iron tubing light grade size 50 mm dia for protection of cables with all fitting and fixed complete to pole or laid in ground.

Please Enable Macros to View BoQ information