Electrification of Depot workshop Bareilly (Mini bye pass, Central Jail, Izzatnagar).

Wiring points for light with 1.50 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as

Same as item No.(1) but for fan and light duty exhaust fan.

Same as item No.(1) but for 5 Amp plug point

Same as item No.(1) but for call bell point

Same as in item no. 1 but for two way light in PVC conduit with 1.5 sq. mm FRLSH PVC insulated multisrand copper conductor cable as earth wire drawn inside the conduit Make- Anchor / havels

Supply and fixing of power plug with 15A/250 V flush type switch and 5 Pin 15 A/250V flush type universal socket in suitable M.S. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.

Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

Supply and wiring of submain 4 number 10 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVC conduit along with two numbers 6 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

Supply and wiring of submain with two number 2.5 sqmm FLUSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy rigid steel conduit on surface with one number 14 swg copper earth continuty wire etc. complete in all respect

Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work . ( for Telephone/Television points)

Same as in item (11) above but for 25 mm dia

Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.

Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.

S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring

Supply fixing of electronic fan regulator(modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.

Supply anf fixing of recess / Surface /Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder Coated die cast aluminium housing with heat sink diffuser / Reflector and driver set complete in all respect. Cat AAA

Supply and fixing of single light wall bracket on matching M.D.F.E.G. Board base etc. complete in all respects. Category AA

S/F of LED tube light with batten suitable for up to 1X22 watt LED tube light fitting including tube on suraface complete in all respect.a) 1x22 Watt. CAT-AAA

Supply of wall Bracket light Fixture suitable for 15W RF CFL Lamps complete in all respects as required.

Supply & Fixing of LED Tube light batten fitting suitable for up to 1X22 watt LED Tube light fitting including tube on surface complete in all respects

Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG/TEAK PLY board including making connection etc. as required.

Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.600x480x200 mm. size

Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 600x480x200 mm. size

Supply and fixing of 6 Way TPN flush/surface mounting distribution boards without MCB with additional metal door complete in all respects.(CAT: B)

Supply and fixing of 6 - 32 amps.240 volts 'L' series miniature circuit breaker 6 Amp. To 32 Amp. (10 K A ) in existing MCB, DB complete with connections as required. (CAT: A)

Supply & fixing of 6amp to/10/16/20/25/32 amp. SP MCB (10 KA) Make -MDS / Cat B

S/F of 63 amp 2 pole MCB (10 K.A.) Make -MDS /ABB Cat A

S/F of surface/flush mounting SPN distribution board without MCB complete in all respect as directed at site. Make -MDS /ABB 12 WAYS CAT A

Supply fixing of 40 Amp. 4 pole mcb(10KA). (CAT: A)

Supply Fixing and making commection of 30 MA E.L.C.B. (Earth leakage circuit breaker) of din/R.C.C.B. rail mounting complete in all respects as per direction and satisfaction of engineer-in-charge. Cat A 40 Amp 2 Pole Make -MDS /ABB

Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge. [CAT A]

Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. CAT A

Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

Supply and fixing of two number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of work as directed at side.

Same as in item (36) above but one number 8 SWG copper wire.

S/f of 10 pair Junction Boxes for Floors and building with Krone connectors , with connection and punching of same

Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required. S O R 1501+1115

Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep.

Supply and laying of aluminium conductor PVC. insulated armoured, served, sheathed cable 1100 volts grade at 750 mm below ground level over a cushion of 75 mm thick sand around & protected with brick on sides & top on surface the cable run shall be fixed on M.S. clamps etc. of suitable size complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.Make- Havels / Pasaka 16 sqmm 4 core

70 sqmm 3.5 core

16 sqmm 2 core

a) 25 sqmm 3.5 core

b) 10 sqmm 4 core

c) 10 sqmm 2 core

d) 6 sqmm 2 core

Supply and fixing of brass nickle plated compression gland for PVC insulated and armoured served sheathed, under ground cable including rubber ring etc. complete with all respects, the armouring of the cable shall be properly connected with earth as per direction of Engineer-in-charge.16 sqmm 2 core

Supply and fixing of palm or pin type copper tin plated cable socket (Lug) to the cable leads, including with tape, making connections etc. complete in all respects as per directions of the Engineer-in-charge.16sqmm

Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.2 Pair

Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supply and fixing of steel tubular pole 7.50 meter long designated 410 SP-6 in 1:3:6 cement concrete foundation including excavation, back filling etc. complete in all respects. PWD 607

Supply and fixing of LED street light fitting hving die cast 'Aluminium' body and difuser with driver set with suitable for 75 to 90 watt conforming to IP 66 protection to complete in all respect Cat-AA

S/F of 32A 240V SPN metal clad rewireable type switch fuse unit complete in all respects. PWD 302

S/F of 32A 240V SPN metal clad rewireable type switch fuse unit complete in all respects. PWD 302

S/F following capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of timer switch TSO 100 series with contractors HRC fuses, isolating switch Metreing instrument and instrument box with CTS etc. in case of TPN complete in all respects including the cost of fixing materials, labour T & P etc. as per direction and satisfaction to the E/I: 15 A SPN

Supply & fixing of 12.5 mtr high mast shaft of approved make with rising system hot dip glavanized inside & out side dip , heaving pole sheet thickness 3 mm top dia miminimum 150 mm , bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumfrential weld , with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool motor , 3 point supervision system with steel wire rope 6 mm dia , double drum winch , including making suitable foudation as per manufacture drawing / site requirement along with foundation bolts nuts , wshers, anchor plates etc, complete ni all respect.

Supply and fixing of LED street light fitting hving die cast 'Aluminium' body and difuser with driver set with suitable for 110 to 130 watt conforming to IP 66 protection to complete in all respect Cat-AA

Supply and burying of 600 x 600 x 6.0mm G.I. plate, vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. Pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG G.I. Wire in 15 mm dia G.I. pipe upto (switch board from appron switch board the cost of G.I. pipe and G.I. pipe will be extra) 30mm square C.I. frame with hinged cover masonry housing, alternate layers of charcoal/coke and salt at least 150 mm thick alround etc. as per directions of Engineer-in-charge complete in all respect. PWD 702

S/F of 20 - 30 watt solar street light as per direction of E/I etc complete