QUANTUM OF WORKS INVOLVED IN PROVIDING NEW TRANSFORMER DUE TO OVERLOADING OF EXISTING TRANSFORMER AT DIFF. SITES IN BUSINESS PLAN YEAR 2025-26 UNDER THE AREA OF EDD-PURWA UNNAO..

Amount

Safe Carriage of following materials from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.

S.T. Pole 11 mtr long

PCC Pole 8.5 mtr long

Other loose line materials with including conductor, PVC Cable, Single and double Pole accessories, complete stay & earthing, insulator, Channel, S/S Angle etc. from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.

Diff. Conductor for 11 KV Line

Three Phase A.B. Cable of diff. size

LT PVC Cable size 1x400 sq mm

LT PVC Cable size 3.5x70 sq mm

Safe Carriage of following T/F from Elec. Store Center Unnao to diff. work dump site along with loading unloading and propoer stocking.

T/F 250 KVA 11/0.4 KV

T/F 100 KVA 11/0.4 KV

T/F 63 KVA 11/0.4 KV

T/F 25 KVA 11/0.4 KV

Fixing of 11 KV D.O. Fuse Set at Double Pole with D.O. Fuse mounting Channel, clamps and nut & bolts including all associated work.

Supply & Fixing of following materials for above job-

D.O. Fuse mounting Channel

Clamp for mounting Channel with N&B

Construction of masonry type T/F plinth, suitable for mounting of distribution transformer. Size of the plinth will be 1.5 mtr x 1.5 mtr x 1.5 mtr (LxBxH) solid with brick work. 75 mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75 mm thick done on all the exposed sides to the plinth as per RESPO norms. (All the material will be arranged by the contractor)

Placement of 11/0.4 KV T/F from dump site to newly constructed T/Fs Plinth & installation and commissioning of 250 KVA T/F and All the jumpering & connection with the system are included in the scope of work. (All the required materials for above job shall be provided by contractor except 250 KVA T/F)

Supply & Fixing of following materials for above job-

L Piece Copper 50x225x10 mm

Al. Lugs for 250 KVA T/F

Earthing of Neutral of Transformer & Transformer body by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 40 ft. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X5 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which Transformer neutral & Body connection being done by G.I. Strip as per RESPO norms . (All the material will be arranged by the contractor)

Erection of PCC Double Pole (11 KV Line) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site including all associated work.

Supply & Fixing of following materials for above job-

Clamp for Top and Dropper channel with N&B

Erection of STP Double Pole (11 KV Line) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site including all associated work.

Supply & Fixing of following materials for above job-

Clamp for Top and Dropper channel with N&B

Erection of PCC Pole (LT Line) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Supply & Fixing of following materials for above job-

L.T. Clamp with Nuts & Bolts

L.T. Shackle Insulator

Nuts & Bolts for Shackle Insulator

Erection of ST Pole (LT Line) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Supply & Fixing of following materials for above job-

L.T. Clamp with Nuts & Bolts

L.T. Shackle Insulator

Nuts & Bolts for Shackle Insulator

Mounting of following Transformer on double pole including its cartage and dragging from dump site to pit site & installation and commissioning of T/Fs and All the jumpering & connection with the system are included in the scope of work. (All the required materials as 08 nos.-Al. Lugs for each T/F, Nut & bolts for S/S Angle etc for this job shall be provided by contractor except T/Fs and LT PVC Cable)

T/F 100 KVA

T/F 63 KVA

T/F 25 KVA

Supply & Fixing of following materials

Alluminium Lugs for T/F

SMC Box with clamp

Laying of LT PVC Cable of diff. sizes including all associated work. (All the required materials for above job shall be provided by contractor except LT PVC Cable)

Making T-off arrangement including fabrication & fitting of accessories.

Supply & Fixing of following materials for above job-

Holding clamp for T-off Channel with N&B

Grouting of PCC/ST Pole as per RESPO Norms with grouting materials.

Earthing as per RESPO Norms.

Supply & Fixing of following materials for above job-

Earthing wire Clamp

Digging of pits, fixing nuzzling and grouting of stay rods as per RESPO Norms with grouting materials.

Supply & Fixing of following materials for above job-

Stay Clamp with N&B

Stay Insulator

Laying stringing and sagging of O/H 11 KV Line Three Phase by diff. Conductor including all associated work with joint/jumpers and binding of insulator as required.

Laying stringing and sagging of O/H Three Phase L.T. Line by ABC of diff. size including all associated work with joint/jumpers and binding of insulator as required.

Riya Electricals (BID ID -5531925)

chauhan enterprises (BID ID -5530866)