ADDN/ALTN TO CERTAIN BILLETS TO ACCOMMODATE WOMEN AGV AND PROVN OF HARDSTANDING AT SPORTS GROUND AND OPEN GYM GROUND AT AF STN SURATGARH

Amount

BOQ (ADDN/ALTN TO CERTAIN BILLETS TO ACCOMMODATE WOMEN AGV AND PROVN OF HARDSTANDING AT SPORTS GROUND AND OPEN GYM GROUND AT AF STN SURATGARH.)

Excavation in trenches in soft/loose soil, not exc 1.5m wide and not exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out, complete all specified and directed.

Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil, complete all specified and directed.

Removing excavated soil exc 250m but not exc 500m and depositing where directed at a level not exc 1.5m above the starting point, complete all specified and directed.

Demolition of stone or brick masonry built in cement mortar including all quoins, arches etc. but excluding ashlar facing, dressed stone work etc, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 5 here-in-before but except bricks, complete all specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 sqm each, complete all as specified and direcetd.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 sqm but not exc 4.0 sqm each, complete all as specified and direcetd.

M&L for pressed steel frames of size 105mmx60mm made of 1.25mm thick cold rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all specified and directed.

M&L for pressed steel frames of size 125mmx60mm made of 1.25mm thick cold rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all specified and directed.

M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work, complete all specified and directed.

S&F for factory made flush shutter of 35mm thick, solid core c onstruction with block board core and plyboard face panels, commercial type on both side and fitted to steel frame, complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a), supplied and fitted to chowkats, complete all specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all specified and directed.

S&F 30mm thick factory made moulded PVC door (Wood free) consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mmx40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5mm thick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel deign in plain / prelam colours after routing the moulded design on one side of the inside panel. 5mm plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20mm thick (5mm x 4 nos.) thick PVC sheet to be given for lock provison at lock height complete all specified and directed.

S&F butt hinges, medium weight, cold rolled, mild steel 100mm long (ISI marked), complete all specified and directed.

S&F butt hinges, stainlees steel 100mm long (ISI marked), complete all as specified and directed.

S&F Aluminum handles, 150mm size plate type complete all as specified and directed.

S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all specified and directed.

S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all specified and directed.

S&F door closer hydraulically regulated, design No 3 universal type suitable for door shutter of any width and of weight 61kg to 80kg each cast iron body, complete all specified and directed.

S&F factory made steel window/ventilator box type using ERW hollow 'P' section comprising double frame for glazed and gauged skeleton shutters jointing internally with flat iron complete including grill of 12mm square bar, fixed horizontally @ 100mm centre to centre hinges, handle, tower bolts, lugs etc with cooler provision complete all as specified and directed. Note:- (i) For the purpose of measurement and payment double shutter with frame shall be consider as one unit. (ii) Glazing and wire mesh shall be measured and paid for separately in respective item of schedule.

M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

M&L for figured glass, pin headed type, 3mm thick and glazing with oil putty or wooden beads in squares not exc. 0.5 sqm in each pane, complete all as specified and directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

S&F in repairs factory made mild steel cupboards shutters 1mm thick with frame made from 1.25mm thick sheet including all fittings i.e. mortice lock with handle ,buttt hinges ,peg set of their,etc including two coats of synthetic paint over one coat of primer, complete all as specified and directed.

S&F stainless steel 20-22mm dia curtain rod including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified and directed.

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall, complete all specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and fair without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces of roof projection ceiling etc including repairing of broken portion up to 6m height and surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint in camouflage in multi shade on wall of approved colour and shade over one coat of primer, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemper over two coats JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed.

M&L for complete removal of existing treatment from wall surfaces and applying two coats of oil emulsion distemper over two coats JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of plastered or unplastered old decoraced surfaces on ceiling including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, and using primer of new plastered surfaces, complete all as specified and directed.

M&L for preparation of old surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns, complete all as specified and directed.

M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of old painted surfaces, of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering, brushing etc, filling in crevices and cracks etc with approved filler and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for prepration of new or previously untreated steel surfaces of any description over 10mm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

M&L for prepration of old painted steel surfaces and iron surfaces, over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc, filling in crevices and cracks etc. with approved filler and applying one coat of synthetic enamel paint, complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un- reinforced, complete all as specified and direcetd.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation , filling and mass concrete complete all as specified and direcetd.

M&L for 75mm thick PCC 1:3:6, type C1, (using 20mm graded crushed stone aggregate) as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in sub floor, sub base; concrete surface finished even & rough to receive topping floor/tiles finish/layer, complete all as specified and directed.

M&L for Surface dressing not exc 15cm deep in soft/ loose soil including removing bushes/ small trees etc complete all as specified and directed.

M&L for 75mm thick PCC 1:4: 8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor/tiles etc, complete all as specified and directed.

M&L for 60mm thick precast cement concrete (M-35) colour rubberised factory made, machine pressed interlocking paver blocks, with grey cement and pigment any shape and size as approved by GE, laid over and including 25mm thick sand cushion consolidated properly before and after laying of paver block complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping and sides of rounded or chamfered on edges including necessary form work, complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified and directed.

M&L for reinforcement cement concrete 1:2:4 type B-0 (using12.5mm graded stone aggregate) slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork, complete all as specified and directed.

M&L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F for 35mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) designer Jafri Wall Jallie as per sample, area of each not exc 0.50 Sqm fixed on wall in CM 1:4 including two coats of cement base paint in camouflaging patterns to match the shade with old jafri, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of approved shade of size 450mmx300mmx7mm to 8mm thick as in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tiles exc 0.11 Sqm but not exc 0.18 sqm, in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Demolition of stone slabs/paver block and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine cut polished kota stone slab flooring 18mm-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in CM1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/ rounding of edge properly.

M&L for polished kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly.

M&L for Granite 20mm thick of any type work(table rubbed and polished) in steps, jambs,pillars windows cill cooking platform and like including pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external, including demolition of stone slab and tiles of any description or thickness, complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (Pedestal pattern including one toilet paper holder, one health faucet and jet integrated controlled by two way angle valve) incl plastic water closet seat white colour closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging devices complete all as directed and specified by Engr-in-charge.

S&F in repairs Vitreous Chinaware squatting pan, orissa pattern size 580mmx440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, complete all as specified and directed.

S&F in repairs, PVC valveless, dual type, syphonic action type flushing cistern,10 litres capacity, plunger type, low level, white with inlet, ball valve, float, 32mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed.

S&F in repair Vitreous China Urinals, half stall type ( back wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, including PVC flush pipe, grating, waste coupling and union for discharge pipe, waste pipe, CP spreader etc, complete all as specified and directed.

S&F in repair urinal partition of 8mm thick frosted glass curved shaped chrome finish size 310mmx700 mm, complete all as specified and directed.

S&F in repairs counter wash hand basin vitreous china white oval shape size 440mmX525mmX195mm including PVC waste coupling 32mm size, PVC waste pipe 32mm bore complete making good the surface/joints with white cement, complete all as specified and directed.

S&F 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs stop/angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc, complete all as specified and directed.

S&F in repairs 15mm dia PVC connection 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified and directed.

S&F 15mm Stop valve, fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed

S&F in repairs Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified and directed.

S&F in repairs bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repairs soap dish, any type chromium plated, brass screws complete all as specified and directed.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F sheet glass corner set of 5.5mm thick glass of 3 pieces as per sample approved by GE complete all as specified and directed.

S&F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends with access door of any radius, complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single (Single T ) with access door equal or unequal, complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval, complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bends with access door any radius, complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) junction single (Single T ) with access doore equal or unequal, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F in repairs brass chromium plated grating 125mm dia with hole complete all as specified and directed.

Taking up or down GI tubing with all connections and fittings of 15mm bore, complete all as specified and as directed.

Taking up or down GI tubing with all connections and fittings of 20mm bore, complete all as specified and directed.

M&L for cutting chases in brick or concrete wall, floor, ceiling surface etc for concealed water tubing and making good with pointing in CM 1:3 exc 10cm but not exc. 20cm girth in brick walls etc, complete all as specified and directed.

S&F galvanized iron water tubing, ‘medium grade’ 15mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F galvanized iron water tubing, ‘medium grade’ 20mm bore, with all fittings such as bend, tee, union etc., fixed complete to floor, walls and ceilings or laid in floors, complete all as specified and directed.

S&F Rotational moulded polyethylene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with closed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut including dismiting UNS water tank, complete all as specified and directed.

Taking down existing existing water proofing treatment from the top of RCC/arch slab, including taking down existing PCC padding tiles mud phuska or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish outside the premises, complete all as specified and directed.

M&L for water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of cleaning of concrete or plaster surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per sqm followed by a tack coat @ 1.2kg per Sqm using 85/25 grade industrial hot blown bitumen over it laid with APP modified polymeric water proofing membrane minimum weight 3.6kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) unrolled & bonded to substrate with longitudinal and end laps100mm as per manufacturer's instruction including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls, cut out neatly a horizontal groove 6.5cm deep, 7.5 cm wide section with lower edge at not less than 15 cm above the graded roof surface and groove shall be finished smooth with CM 1:4 with WPC @3% by weight of cement where the parapet wall height is 45cm or less no grove will be required as the water proofing treatment will be carried over the top of parapet wall to its full thickness, complete all as specified and directed.

M&L for 40 mm thick brick tiles laid on cement mortar and joints grounted flush in CM 1:3 mixed with 5% crude oil by weight of cement on above treated, complete all as specified and directed.

All as per ser item No 97.00 here-in-before but except brick tiles, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

M&L for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sq mtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height, complete all as specified and directed. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

Demolition of cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.

M&L for 15mm thick cement screed in CM 1:3 admixed with integred waterproofing compound FOSROC's complast X 421 IC @ 130ml per bag FOSROC's Nito bond AR cement slurry/STP No 1 liquid @ 200ml per bag, complete all as specified and directed.

M&L for appliying two coats of SHALIMAR SUPERCRETE /NITOBOND water proofing coating on the entire surface of sunken portion, complete all as specified and directed.

M&L for galvanized iron spout pipe 40mm dia projecting atleast 20cm clear of wall ‘medium grade’ including making holes in walls & making good disturbed surfaces, complete all as specified and directed.

M&L for broken brick aggregate of gauge 40mm to 80mm for loose filling as in sunken flooring, complete all as specified and directed.

S&F peg set of six made of stainless steel, complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section like MS tubular hollow section with gusset plates, rails, braces, roller and roller plate etc, complete, drilled for fixing of steel sheeting or other covering. Doors, door frame chowkhats etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing including necessary cutting drilling and welding etc, steel conforming to Fe-290 Gde-E-165, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Dismantling and taking down fluorescent tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store (Accessories or components to be provided free for replacement by department) complete all as specified and directed.

Taking down unserviceable sub main wiring of any type/size including wires, conduits/batten etc, complete all as specified and as directed.

Taking down unserviceable DB's box including MCB's of any size/rating, complete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volts grade FRLS cable of copper conductor multi stranded of size 1.5 sqmm (Nominal size) drawn through and including non metallic rigid PVC conduit medium grade, ISI marked not less then 20 mm dia with all accessories like tee, straight joint, L bend etc concealed in wall, ceiling, floor etc, pressed MS Sunken boxes in wall of required size and colour for switches and sockets, 1.5 sqmm (Nominal size) PVC insulated (green insulation) copper conductor FRLS earth continuity cable drawn with wiring and connected to common earth dolly all as specified for one light point controlled by one SP switch including making good distrubed surface, complete all as specified and directed. Note :- Cost for MS sunken boxes and hylum sheets and cutting, chieseling and making good to existing surfaces shall deemed to be included in the quoted rate.

All as per srl item No. 112.00 here-in-before but for one ceiling fan/exhaust fan and wall mounted fan point controlled by one SP switch, complete all as specified and directed.

All as per srl item No 112.00 here-in-before but for one light point controlled by Two, two way switch, complete all as specified and directed.

All as per srl item No 112.00 here-in-before but for one 5 pin socket out let, 6 Amps on same board with the cable 1.5 sqmm size, complete all as specified and directed.

All as per srl item No 112.00 here-in-before but for one 5 pin socket out let, 6 Amps on Independent board with the cable 1.5 sqmm size, complete all as specified and directed.

All as per Srl item No 112.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 sqmm stranded copper conductor FRLS cable PVC insulated including earth wire 2.5 sqmm copper conductor FRLS cable connected to earth dolly, complete all as specified and directed.

S&F switch piano flush button single pole one way 5 Amps 240 volts, complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amps, flush type, 240 volts, complete all as specified and directed.

S&F Socket outlet, flush type 2 in 1, 3 pin, 5 amps, 240 volts, complete all as specified and directed.

S&F switch piano flush type single pole two way 5 amps 240 volts, complete all as specified and directed.

S&F switch piano flush button single pole one way 15 amps 240 volts, complete all as specified and directed.

S&F of ceiling rose, surface type, 65mmx50mm, 3 terminal, complete all as specified and directed.

S&F of lamp holder, PVC/polycarbonate type, insulated body with back plate of batten fitting complete all as specified and directed.

S&F of LED bulb 09 watt, complete all as specified and directed.

S&F LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose, complete all as specified and directed.

S&F LED bulkhead luminaire 10 watt, wall/surface mounted complete with LED lamp 10 watt, all accessories, pre-wired including providing flexible copper wire, twin core cable PVC insulated sheathed, complete all as specified and directed.

S&F LED sleek mirror light fitting 10 watt provided with high output diffuser 2 feet, 230 Volts complete LED tube rod 10 watt with all accessories, pre wired and including connecting up with twin core copper conductor cable complete all as specified and directed.

Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades deposit to store yard as it is in working condition for further hanging in its original position or any other position including as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service includes cleaning, greasing and oiling, painting of fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing complete all as specified and as directed by Engr- in-charge. Note :- Any damage has to be made good by the contractor to make the item functional after testing.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed.

S&F Fan step regulator, 120W, 230 volts, 50 HZ, AC. Supply, complete all as specified and directed.

Taking down exhaust fans of any sweep and any size including cable connections and removing the exhaust fan with blades deposit to store yard as it is in working condition for further fixing in its original position or any other position as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service i.e. cleaning, greasing and oiling, painting of exhaust fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing, complete all as specified and as directed . Note :- Any damage has to be made good by the contractor to make the item functional after testing.

M&L for submain wiring with two single core 6.0 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 sqmm multistranded copper conductor cable as continuous earth wire ccomplete all as specified and directed. Note- (a) The two runs of single core cable and specified earth continuity conductor and PVC conduit with fitting acessories will be measured as one run. (b) Cost of cutting, chasing and make good to existing surfaces are deemed to be including in the quoted rate by the contractor.

S&F in replacement sheet metal enclosures single pole and neutral earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volts, complete all as specified and directed.

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and directed.

S&F of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB SP Complete with connection testing and commissioning, complete all as specified and directed.

S&F of amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity 32A in the MCB SPN complete with connection testing and commissioning, complete all as specified and directed.

S&F of Vertical MCB DB TPN 4 way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V including provision for mounting MCCB upto 125 Amps rating, complete all as specified and directed.

S&F of MCCB 125 Amps 50Hz 4 Pole 415 V with rupturing capacity 16KA with thermal setting of 80 to 100% complete all as specified and directed.

M&L for river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning/protection to cable including spreading, levelling and get 18cm thick after hand punning down, complete all as specified and directed by Engineer-in-Charge. Note: Punned down thickness (over all 18 cm) shall be measured & paid.

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm, complete all as specified and directed.

S&F GI tubing 40mm bore light grade galavanised with all fitting complete for cable protection under road crossing/on pole/wall or similar position complete all as specified and directed by Engr-in-charge.

Make bore to road width for providing GI pipe medium grade both end socketed for passing armoured cable, complete all as specified and directed.

Taking out old unserviceable LT cable of size 10sqmm to 35sqmm 2/4/3.5 Core, complete all as specified and directed.

Supply , laying , jointing and testing XLPE armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 35 Sqmm 3.5 Core complete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified and directed.

S&F for LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with P- 65/66 protection complete all specified and directed.

M&L for cutting opening through brick wall 230mm thick built in cement motar suitable for exhaust fan 300mm seep including making good dismantled portion in CM 1:3 or PCC 1:2:4 type B-1 as required, complete all specified and directed.

Removing excavated material n exc 50mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soils, complete all specified and directed.

Use and Waste of formwork to soffits of suspended slabs such as roof slab, floor slab, landing and similar works not exc 200mm thick (horizontal or sloping) for rough finish surfaces of concrete, complete all as specified and as directed.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

M/s Shubham Enterprises

H S BUILDERS

M/S Shree Ram Enterprises

M/S VISHNU ENTERPRISES

J & K CONSTRUCTION CO

GURUJI ENTERPRISES

BHADU BUILDERS

SRI SAI CONSTRUCTION COMPANY

M/s JUGAL KISHORE MISHRA AND SONS