GE(S) BTD TOKEN NO 07 OF 2023-24 PROVISION OF CERTAIN SPECIAL REPAIR REVENUE AND LBW WORK UNDER AGE BR II UNDER GARRISON ENGINEER (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

M & L for rendering 15mm thick in CM 1:6 on internal wall surfaces of brick work or concrete surface even & smooth without extra cement complete all as specified and as directed .

M & L for rendering 15mm thick in CM 1:4 on external wall surfaces of brick work or concrete surface even & fair without using extra cement mixed liquid water proofing material as per manufacturer's instruction complete all as specified and as directed . (Note:- Liquid water proofing material shall be measured and paid saperatly )

M & L for rendering 5mm thick in CM 1:3 finished the even & smooth on ceiling complete all as specified and as directed .

S&F factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in Preamble 8B.3 of SSR Part -II (2020) and all as shown on drawing on Sl Page No 180 of SSR Part-II (2020) complete all as specified and as directed .

S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings

Supply and fixed aluminium anodised 100mm long butt hinges with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and as directed .

S&F aluminium anodised barrel tower bolt, 125 mm long (ISI marked), fixed to PVC door with screws complete all as specified and as directed.

S & F Aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

S & F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., complete all as specified and directed (thickness of steel sheet shall be 1.25mm) complete all as specified and as directed. Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.

M & L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate in copings, filling in bed block of hold fast complete all as specified and directed.

M & L 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing mild steel sliding door bolts with hasp and staple, length of bolt 300mm, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified and as directed.

Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified and as directed.

Supply and fixing Mild steel pressed handles, 150 mm long, oval type, stove enamelled black (ISI marked) complete all as specified and as directed.

S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L glazed ceramic coloured tiles of approved quality in vertical surfaces 450mm x 350 x 7mm to 8mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

M&L Udaipur green marble slab 18-20mm thick as in corner shelf of 300mm radius including cutting 30mm grovers in wall and jointed & pointed with cement slurry mixed with pigment to match with marble and rounding of edges complete all as specified and directed.

M&L marble work (Udaipur green slabs) 18 to 20 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges of stone sslabs on edges over 15mm thick screed bed in CM (1:4) complete all as specified and directed.

S&F SFRC (Steel fibre Reinforcement concrete cover & frame) HD_20mm ISI marked conforming to IS-12592 graded rectangular internal size 560x560mm & external size of frame 800x800x100mm incl manhole cover having size 560x560x50mm thick and fixed over earthing manhole after demolition of PCC coping & mabhole cover & set in CM 1:4 incl PCC benching in CM (1:2:4) and finishing smooth complete all as specified and directed.

Carefully chipping, removing existing loose/ damaged concrete with plaster from Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items by low impact high frequency hammer/ chipper without damaging the existing sound concrete and exposing old reinforcement upto 10mm beyond corroded reinforcement bars using electrically operated diamond concrete saw blade, making the edges straight and even and cleaning it by wire brush and then by air blower complete all as specified and as directed.

Cleaning all existing reinforcement bars in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items with wire brush/rotary wire brush to make entire circumference surface of bars free from rust scales, loose material, dirt etc., complete and applying alkaline rust converting primer on the existing rebar and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer including cleaning the reinforcement, wire brushing to remove the rust spalls, complete as per manufacturer’s instructions, complete all as specified and as directed. Note :- Mode of measurement : per sqm of breaking area of concrete only.

Providing and application of Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars (consumption Qty as per manufacturer's instructions but min 0.4 kg/Sqm approx) in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and directed by Engr-in-charge. The product should confirm carbonation resistance of 2 mm and bond strength > 1N/sqmm according to ASTM C 882-78 complete all as specified and as directed . Note :- Mode of measurement: per sqm of application area of concrete.

Apply SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment , including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and as directed.

Rebuilding the section of structural damaged RCC/PCC elements of Roof, Ceiling, Chajja, Fascia, Fins, Drops repair to spalling concrete to its original size and shape in layers of 10 mm average thickness in 1st layer by providing and applying with pre-batched, one component fiber based repair mortar having compressive strength >= 50 N/sqmm (28 days) according to ASTM C 109; flexural strength >= 5N/ sqmm (7 days) according to ASTM C 293-79 complete all as specified and as directed.

All as per BOQ Srl item No 28 here-in-above but for each additional 10mm uniform thickness for subsequent layers.

Material and labour for 40mm thick brick tiles laid on mud mortar & joints grouted flush pointed in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud pushka including dismentalling of brick tiles or tressing tiles single layer on roof complete all as specified and directed.

Material and labour for 40mm thick brick tiles laid on mud mortar & joints grouted flush pointed in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud pushka but except brick tiles (old serviceable brick tiles to be reused after proper cleaning & washing) including dismentalling of brick tiles or tressing tiles single layer on roof complete all as specified and directed.

S & F in repairs CP basin mixture single lever type and fixed complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed.

S & F brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and as directed.

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection complete all as specified and directed.

Taking down or up 25 mm bore galvanised iron tubing /PE-AL-PE pipes and connection complete all as specified and directed.

S & F 15mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

S & F 25mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set in and including lime concrete complete all as specified and directed.

S&F in repairs 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC including pipe 32mm dia 900mm long complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white with trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe etc., including plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, jet spray complete all as specified and directed

Supply and fixed in repair Vitreous china counter top oval shaped wash hand basin, white, of size 560 x 450 mm including cast iron cartilever bracket 32 mm dia brass waste coupling and including fixing of taps, waste fitting and union complete all as specified and as directed. Note :- Pillar tap shall be measured as supply only under respective item.

S & F in repair PVC connection 15 mm size with brass nuts of length 600mm of approved quality complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F 75mm bore cast iron (spun) sand soil waste and vent pipe with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.

S & F 100mm bore cast iron (spun) sand soil waste and vent pipe with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.

S & F 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed

S & F 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed

S & F 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door bore complete all as specified and directed.

S & F 75mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door bore complete all as specified and directed.

S & F 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F in repair 100mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

S & F in repairs 15mm bore fancy type chromium plated brass, quarter turn, bib tap, long body, with flanges cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm bore stop valve for cast copper alloy, chromium plated, angular type screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15mm bore, fancy type, chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair chromium plated soap tray of size 100mm x 100mm x 1mm thick complete all as specified and directed.

S & F 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F 100mm bore cast iron cowl complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each exceeding and removal from site complete all as specified and as directed.

S & F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 25mm bore ( weight 210 gms Minimum) complete all as specified and as directed.

Dismentalling water tanks exceeding 500 ltr and not exceeding 1000 ltr capacity water storage tanks remove from site complete all as specified and directed

Supply and fixing three layers 1000 liter HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel complete all as specified and as directed.

S & F CP grating (with waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed.

M&L Half brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean to any radius in walls built in CM (1:4), etc; complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed .

M&L applying three coats of white wash on newly plastered surfaces on ceiling including preparation of surface, complete all as specified and directred.

M&L applying three coats of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directred.

M&L applying two coats of white wash on old plastered surfaces on wall including preparation of surface, complete all as specified and directred.

M & L for two coats of cement base paint of approved tint on new plastered wall surfaces including preparation of surfaces complete all as specified and directed

Supply only integral water proofing compound as approved by GE from list of make attached in tender documents complete all as specified and directed.

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) M & L rendering 10mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces. (Note:- WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K (Dr. Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr. Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45GSM) as per manufacturers recommendation.

Material and labour for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in filling of sunken floors etc complete all as specified and as directed.

S & F Aluminium powder coated vents including provision of necessary rubber gasket for fixing glass panes etc complete all as shown in drawing No. CEBT/SK-936 sheet 1/1 available in AGE B&R-I office,complete all as specified and as directed. Note:- Sheet glass shall be measured and paid separately under respective item.

Dismantling floor, hearth or wall tiling incl cement mortar bedding and rubbish off the premises complete all as specified and directed.

S & F for vitreous china urinal, half stall type, white excluding flushing cistern but including flush pipe, and waste pipeand also including connections to flushing pipe and outpipes, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with and including 60 mm long brass screws, pointing arount urinal back in cement complete all as specified and directed.

M & L for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregatein manhole covers cooking plateform/slab etc with plain fair faces including chamfers, eatherings,throating etc. and setting in mortar set in cement mortar (1:4) including neccessary form work complete all as specified and as directed.

M&L for complete removal of esixting surfaces of ceiling and applying two coat of cement base paint of approved tint of old plastered ceiling surfaces complete all as specified and as directed.

M&L for complete removal of esixting surfaces of wall and applying two coat of white wash of old plastered wall surfaces complete all as specified and as directed.

S & F CP health faucet 15mm bore including 1Mtr flexible led complete all as specified and as directed.

S & F stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and as directed.

M&L for 20mm thick granite slabs for wash hand basin over 15mm thick screed bed in CM 1:6 including moulding and nosing of corners/ edges complete all as specified and as directed.

M & L for rendering 15mm thick CM(1:4) mixing with WPC @ 200 ml/bag of cement on fair faces of concrete/brick tile surfaces on roof slab after wire brushing and cleaning top surface complete all as specified and as directed. Note:- WPC will be measured and paid for separately under respective item.

M & L for cleaning of old Roof wall/ concrete surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm followed by APP modified five layer ploymeric membrane 3mm thick, minimum wt 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) manufactured by M/S STP Ltd/IWL India Ltd or its equivalent, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required & finally finished with bituminous aluminum paint @ 0.10 Kg/Sqm complete all as specified and directed.

Taking down old unserviceable rolling shutter of any size upto 36 Sqm area including hood cover complete with all accessories and making good disturbed surfaces with CM 1:4 complete all as specified and directed.

S & F steel rolling shutter without ball bearing as specified including top cover and 1 mm thick lath anchoring rod hasp and staple and gear operated type with bevel gear box and crank handle and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and directed.

Supply only safety lever locks of size 150mm mild steel with 4 leavers with two keys for rolling shutters approved / best quality complete all as specified and directed.

S & F ball bearing suitable for new rolling shutters complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar in 1:4 on other than fare face of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed.

S & F built-in-locker of 1mm thick black steel sheet of size 760mm x 600mm x 1100mm and specifications as per drawing No. FE- 1029 including a coat pf primer and two coat of synthetic enamel paint and provision of CP handle and mortice lock as per Godrej Pattern complete all as specified and directed.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/S BHAGWATI CONSTRUCTION COMPANY

Aman Enterprises

M/s Manav Builders

SAHIL CONSTRUCTIONS

SHARDA ENTERPRIES

M/s Kamal Constructions