Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹54.4 LAccepted-AOC | L1 | Accepted-AOC work completed | |
| 2 | L2₹55.9 L+₹1.5 L (2.78%)Rejected-Finance | L2 | Rejected-Finance Other Then Lowest | |
| 3 | L3₹56.0 L+₹1.6 L (2.96%)Rejected-Finance | L3 | Rejected-Finance Other Then Lowest | |
| 4 | L4₹59.8 L+₹5.4 L (9.96%)Rejected-Finance GOVT ELECTRICAL CONTRACTOR C VILLAGE HAT PO BAJAURA TEHSIL BHUNTAR DISTRICT KULLU HP 175125 | KULLU | HIMACHAL PRADESH | 175125 | L4 | Rejected-Finance Other Then Lowest |
Tender Value
₹70.7 L
EMD Value
₹1.4 L
Closing Date
2 Mar 2022, 3:00 pmClosed
Executive Engineer HPPWD Division Dalhousie
Executive Engineer HPPWD Division Dalhousie
Formation Cutting, C.D. work, Providing and laying M/T
2022_PWD_57112_4
PWD-TA-Tender/2021-22- 14361-411 dated 15.02.2022
Open Tender
Civil Works
Item Rate
180 days
Dalhousie
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,000
₹1.4 L
2 Dec 2023
23 Feb 2022
2 Mar 2022
23 Feb 2022
2 Mar 2022
23 Feb 2022
23 Feb 2022 - 28 Feb 2022
Amount
Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, ordinary rock ,soft rock ,hard rock chiseling, wedging out rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the lines, grades, width, cutting and trimming of side slopes and levels as shown in the drawings and as directed by Engineer-in-Charge at site, according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same within all leads and lifts in acquired road width and transportation of un-useful materials for filling in roadways camber ,embankments for grade improvements and disposal of all un-useful materials to approved dumping sites through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling fine dressing and carriage of machineries ,materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/ labour if required.All useful materials such as stones, shingle aggregate and slates etcetera shall be sorted out and stacked in proper stack. Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is inclusive of octroi, royality ,Malkana, toll tax , GST or any other taxes imposed by the Government .
Providing and Laying mechanically mixed and vibrated plain cement concrete in foundation for all type of structure complete of plain concrete nominal mix 1:5:10 (one cement isto five sand isto ten graded) crushed stone aggregate 40 mm (Forty millimetre) nominal size in or under water and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arrise at the time of laying under water complete for all height / depth including the cost of form work complete in all respect as per the drawing and MORD technical specifications Section 800, 900 ,1200 and 1604 and as per direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rates is inclusive of the octori, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Back filling with granular material behind abutments, return walls, wing walls and retaining walls complete as per drawings and MORD technical specification clause 1203 and 1604 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octoroi, royalty, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Government.
Providing Weepholes in brick masonary / stone masonary / plain / re-enforced concrete abutment, wing wall, return wall, retaining walls with 100 mm (one hundred millimetre) dia meters, PVC pipe extending through the full width of the structures with a slope of 1 (one) vertical : 20 (twenty) horizontal towards drainage face complete as per drawing and MORD technical specification clause 709, 1206.6 and as per direction of Engineer-In-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates is inclusive of the octoroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and laying Mechanically mixed and vibrated concrete for plain cement concrete nominal mix 1:3:6 ( one cement is to three sand is to six graded crushed stone aggregate 40 millimetre (forty millimetre nominal size on ground or under water and curing complete for 14 (fourteen) days, in open foundations for all type of structures including pumping or bailing out water (surface and sub soil water) dewatering for all depths and any quantum of water including removal of slush which may arise at the time of laying concrete complete for all heights / depths including the cost of form work complete as per drawings and M.O.R.D. technical specification section 800,900 and 1200 or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality ,Malkana, toll tax ,GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete 1:2½:5 (one cement: two & half sand: five graded crushed/broken stone aggregate 40mm (forty miilimetre) nomianl size) laid for cradle bedding and curing complete including the cost of form work as per drawing and MORD technical specification section 800, 900, and 1100 and as per the directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax ,GST or any other taxes imposed by the Government .
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete 1:2½:5 (one cement: two & half sand: five graded crushed/broken stone aggregate 40mm (forty miilimetre) nomianl size) laid for abutment and curing complete including the cost of form work as per drawing and MORD technical specification section 800, 900, and 1100 and as per the directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax ,GST or any other taxes imposed by the Government .
Providing and laying mechanically mixed and vibrated concrete for plain / reinforced concrete in sub structure for all type of structure complete of plain cement concrete grade M-20 (M-Twenty) with minimum nominal mix 1:2:4 (one cement isto two sand isto four graded crushed / broken stone aggregate 40 mm (forty miilimetre) nominal size) in or under water and curing complete in all type of structure including the cost of form work in all type of structure as per drawings and MORD technical specifications Section 800, 900, and 1200 and as per the direction of the Engineer-in-charge including carriage of materials within all leads lifts and other incidental. The rates is including octoroi, royality, Malkana, Tol tax, sale tax, GST or other taxes imposed by the Government
Providing and laying mechanically mixed and vibrated plain cement concrete Grade M-20 (M- Twenty) in sub structure design mix having cement contents not less than 330kg (three hundred thirty kilogram) per cubic metre in abutments etcetra and curing complete as per drawing and MORD technical specification section 800, 900 and 1200 including the cost of form work , and hauling of material within in all kinds of leads,lifts as per the entire satisfaction and directions of Engineer-in-charge.The rate is inclusive of octroi, royality ,Malkana, toll tax ,GSTor any other taxes imposed by the Government .
Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and MORD technical specification Section 800,900 and 1400 RCC Grade M-25 (M - twenty five) Design mix with minimum cement contents not less than 400 kg (four hundred kilogram per cubic metre) using graded crushed stone aggregate 20mm (twenty millimetre) nominal size} and curing complete including cost of form work in Deck slab and wheel guard in all heights / depths etcetera or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, , GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated cement concrete in Super structure grade M-30 (M-thirty) design mix with minimum cement contents not less than 430 kg (four hundred thirty kilogram) per cubic metre using 20 mm (twenty millimetre) nominal size crushed stone aggregate in super-structure as per drawing and MORD technical specification section 800,900,1000 and 1400 including the cost of form work and cost of reinforcement for reinforced concrete work in wearing course and curing complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of reinforced cement concrete railing with mechanically mixed and vibrated M-25 ( M-Twenty five) grade Design mix cement concrete having cement contents not less than 400 kg (four hundred kilogram) per cubic metre using graded crushed stone aggregate 12 mm (twelve millimetre) nominal size in cast in situ and precast members and curing complete, constructing railing true to line and grade, tolerance of vertical railing post not to exceed 1 in 500 (one in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (two thousand millimetre) including the cost of reinforcement and form work as per drawing and MORD technical specifications section 800,900,1000 and 1200 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Supplying fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD technical specifications section 1000 and 1400 including cutting ,bending ,binding and placing in position complete in all respect including cost of binding wire upto all height /depth as per the directions of the Engineer-in-charge including carriage of materials within all leads , lifts and other incidental.The rate is inclusive of octroi, royality, Malkana, toll tax ,GST or any other taxes imposed by the Government .
Providing and laying ( to level or slope) 900 mm dia ( Nine hundred millimetre) diameter reinforced cement concrete heavy duty non pressure pipes IS class NP-2 for culverts on first class bedding type "A" concrete cradle bedding M15 (M- fifteen) grade in single row including fixing collar with cement mortar 1:2 (one cement: two sand) but excluding the cost of excavation,protection works,back filling, bedding concrete and masonry work in head walls and parapets as per drawing and MORD technical specifications section 1100 or and as per the directions of the Engineer-in-charge including carriage of materials within all leads , lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax ,GST or any other taxes imposed by the Government .
Providing and laying mechanically mixed and vibrated plain cement concrete 1:2½:5 (one cement: two & half sand: five graded crushed/broken stone aggregate 40mm (forty miilimetre) nominal size) laid in sub structure like abutment , toe wall and Parapets etcetra and curing complete including the cost of form work as per drawing and MORD technical specification section 800, 900, and 1100 or and as per the directions of the Engineer-in-charge including carriage of materials within all leads , lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax ,GST or any other taxes imposed by the Government .
Loosening of ground upto a level of 300mm (Three hundred millimetre ) below the sub grade level, watered, graded with motor grade and compacted in layers to meet the requirements of table 300.1 and 300.2 with three wheel 80-100 (eighty to one hundred) kN static roller for sub grade construction as per MORD technical specifications section 300 or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of granular sub-base by providing well graded materials, as per table 400.1 and spreading in uniform layer with tractor mount grader on prepared surface mixing by mix in place method with rotovator at OMC and compacted with three Wheel 80-100 (Eighty to one hundred) kN static road roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing, laying, spreading and compacting stone aggregate size 63 mm to 45 mm (sixty three millimetre to forty five millimetre) Grading-II (75 mm) (Seventy five millimetre) consolidated thick) to water bound Macadam, specification including spreading in uniform thickness using template, hand packing rolling with three wheel 80-100(Eighty to one hundred) KN static roller in stages to proper grade and camber applying and brooming, stone screening type-A of size 11.2 mm eleven point two millimetre) nominal size at the rate of 0.20 cum (zero point two cubic metre) per ten square metres and binding material at the rate of 0.06 cum (zero point zero six cubic metre) per 10 sqm (ten square metre) to fill up the interstices of course, aggregate watering and compacting to the required density as per MORD technical specifications section No. 400 by mechanical means and as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidential. The rate is inclusive of octroi, royality ,Malkana, toll tax ,GST or any other taxes imposed by the Government .
Providing and applying primer coat on prepared surface of granular base including cleaning of the road surface with Hydaulic brooms and spraying primer @ 0.85 Kg. (zero point eight five kilogram) per square metre SS-I emulsion using mechanical means as per drawing MORD technical specifications section 500 as per the entire statisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.275 kg (zero point two seven five killograme) per sqm on prepared dry and hungry bituminous surface/granular surface cleaned with Hydraulic broom as per MORD Technical Specification section 500 or as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate is including the octori, royality, Malkana, toll tax,GST, or other taxes imposed by the Government.
Providing, laying and rolling of 20 mm (twenty millimetre) thickness open-graded premix carpet by machanical means composed of 13.2 mm (thirteen point two millimetre) to 5.6 mm (five point six millimetre) aggregates either using penetration grade bitumen (VG-10) (viscosity grade ten) 14.60 kg (fourteen point sixty killogram) per ten square metre and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 (Eighty to one hundred) kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type B as per Technical Specification Section 500 and as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government.
Providing and laying seal coat by mannual means sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Section 500 using bitumen (VG-10) (viscosity grade ten) 6.80 kg (six point eighty killogram) per 10 (ten) square metre and as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government.
THAKUR CONSTRUCTION CO
KARAN DHADWAL
Vinod Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .