SPECIAL REPAIR TO SINGLE JCOs LIVING BLDG NO P103 OF 1 BIHAR AT KHOJATOLI AND SPL REPAIR TO SQUASH COURT UNDER HQ 124 INF BDE AT NAMKUM POCKET OF RANCHI MIL STN UNDER GE RANCHI.

Amount

Taking down complete existing treatment of roof/ parapet , Mud puska on roof /parrapet including plastering, brick tiles, stone slabs and leeping any thickness including removal etc complete all as specified and directed

M&L Brushing neat cement slurry (3 Kg of cement per Sq M) mixed with chemical compound in the proportion, chemical compound SUPER LATEX of DR FIXIT of PIDILITE INDUSTRIES LTD, water & cement (1:4:7) or SBR LATEX of STP LTD or other equivalent as per manufacture instructions for bonding of old concrete surface to new concrete all as specified & directed complete.(Note: WPC will be measured and paid seperately.)

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral water proofing chemical PIDIPROOF LW mixed in proportion 200 millilitre per 50 Kg cement of DR FIXIT of PIDILITE INDUSTRIES LTD, or STP No 1 (LIQUID) of STP LTD in proportion 200 millitire per 50 Kg cement, as in padding, benching,Sunken portion etc on roof surface for corecting/making proper slope on roof, etc complete all as specified and directed

M&L Rendering 10 mm thick in cement mortar 1:4 on concrete / brick surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof / sunken slab /wall complete all as specified and directed NOTE : water proofing liquid will be measured and paid seperately .

M & L for Water proofing treatment on "Non Accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed.

Properly cleaning and drying concrete surfaces.

Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm

Applying evenly tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm.

Laying unrolled over the bitumen coated surface, polymeric water proofing membrane 3mm Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

Applying a coat of bitiminous aluminium paint @ 100 Gram / Sq M over & incl a coat of hot air blown grade bitumen of grade 85/25 @ 1.2 Kg/ Sqm duly sanded over polymeric membrane complete all as specified and directed

Supply only water proofing compound (liquid),ISI marked.

S&F factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber,frame (88mm x 52mm),sliding sash (42mm x 67mm),sliding interlock (one vertical length in each shutter)(45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket. 1.2 +- 0.2mm thick galvanized steel frame (30mm x 18mm) 2 nos,sliding sash (30mm x 18mm) 2nos,sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100m long fastener. Hardware (touch lock of zinc alloyed (white powder coated),steel roller system,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate excludes cost of glass and includes all oyher connected accessories) area n.exc.2.00 sqm each fixed from ground floor to height of 12 floors

S&F 7 mm thick aluminium grills of make "Decogrill" model DG 104 surrounded by aluminum 'C' channel and size of opening 75x75 mm all as specified and directed fixed from ground floor to height of 12 floors

S&F 4.80mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane

S&F 4.8mm thick tinted glass ordinary quality and glazing with rubber gasket in squares exceeding 0.50 sqm in each pane

S&F of staineless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium/pvc sections fixed from ground floor to height of 12 floors

S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed.

S&F in repair 18/19 mm thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc complete

S & F continuous (Piano) hinges M S bright finish or Electro galvanized 40 mm wide flaps (when open).

S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished

S&F 2nd class hardwood plain fillets, square, rectangular or rectangular in section, clean sawn secured with nails sectional area exc 13 sqcm & n exc 25 Sqcm complete all as specified and directed

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and directed

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 complete all as specified and directed

M&L Half Brick thick wall with sub class 'B' bricks built in CM 1:4

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed

M&L 10mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed

M&L rendering 15mm thick (10mm + 5mm)in CM 1:4 in two coats on fair faces of brick work , finished even and fair without using extra cement with WPC.

M&L rendering 05 mm thick in CM 1:3 on fair faces of concrete finished even and fair in ceilings, complete all as specified and directed.

M&L for complete removal of existing surface and finishing walls with acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed

M&L three coat of white wash on newly prepared surfaces on ceilling , etc complete all as specified and directed

M & L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls, white or tinted over a coat of chalk whiting, complete all as specified & directed

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with 2mm thick wall care putty and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete all as specified and directed

M & L preparing old decorated surfaces, plastered or unplastered and applying one coat of white wash on walls of buildings complete all as specified and directed

Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level ) complete all as specified and directed

M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified and directed

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed

M & L 40 mm thick PCC type B - 1, 1:2:4 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement complete all as specified.

Supply only 38mm wide glass dividing strips, 3mm thick complete all as specified and directed

M & L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete all as specified and directed

S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour all as directed and specified.

M&L cement concrete type E-2 (1:5:10) using 40mm graded aggregate as in sunken portion of toilets

M&L rendering 15mm thick in cement mortar 1:4 with water proofing compound 2% by wt of cement, finished even and smooth without using extra cement in sunken portion complete all as specified. Note:- WPC shall be measured and paid separately

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed

Roughening surfaces of old concrete floor by picking , sweeping cleanand washing down with water to remove dust etc and Brushing neat cement slurry with 3 kg of cement per sqm

M&L antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed

M & L machine pressed precast concrete coloured Inter locking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment, over sand cusion ,over compacted surface complete all as specified and directed

M & L sand filling under paver including watering and consolidation.

M&L non skid coloured ceramic tiles 300 x300 x7mm thick in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

M&L coloured ceramic glazed tiles 375x250x7mm/450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement

M&L joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

M&L joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in, skirting, dado, etc over and incl 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

M&L machine cut kota stone in step/riser and slab flooring 18-20mm thick over & including 20mm screed base in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding, rubbing and polishing complete all as specified and directed

Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) not exceeding 1.5 Sqm each incl stacking for issued under Sch of Credit.

All as per item No 50 above but exc1.5 Sqm but n.exc. 4 Sqm.

Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm each

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togeather with solvent cement, fix in frame as specified.

S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.

M&L for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each,

M&L Bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staple, chains, hand made sliding bolts, clamps, hold fasts, wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and directed

M&L 35 mm thick 2nd class hardwood, factory made plain framed, paneled shutter (three panel) with lock rail and panel of 12mm plywood commercial on both faces. The size of rail and style as per IS: 1003(Part - 1),kiln seasoned and chemically pressure treated & and fitted to chowkats complete all as specified and directed

S & F 30 mm thick 2nd class hardwood, factory made flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters of any no of panels, divided into squares with plain, chamfered or rounded, mitred & rebated sash bars and prepared to receive glass, gauze etc edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a). Sample of shutter can be seen in GE's office.

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks/wooden patti etc complete all as specified and directed

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long.

S & F Aluminium anodised handles of extruded section and fixed 125 mm long.

S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S & F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S & F 250 mm long mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.

MS ordinary rat tail rod pattern springs 200mm, including roller and roller plate complete all as specified and directed

M & L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and directed.

M&L for preparing old painted wooden surfaces of any description not otherwise described , over 10 cm in girth or width and applying one coat of synthetic enamel paint of approved shade all as specified and directed

S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm

Demolition of cement concrete reinforced as in chullah hoods , shelves and plate form etc complete all as specified and directed

M&L RCC as in kitchen platform, shelves type B-0 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified

S&F TMT bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc all as specified.

S&F in repairs, 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

Taking up or down GI steel tubing in any position and connection including fitting, cleanings for reusing if any as specified and as directed for the following size :-

15 mm bore

20 mm bore

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors etc complete all as specified for the following size :-

15 mm bore

20 mm bore

Refixing old galvanised steel tubes & connections on wall 15 mm bore complete all as specified for the following size :-

15 mm bore

20 mm bore

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed both ends for or iron pipe or for unions and fixed complete all as specified and directed

S&F in repairs15mm dia pillar tap cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed

S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as specifed and directed

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling

S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag)

S&F CP towel rail, 20mm dia, D type,60cm long complete all as specified and directed

S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete of make-Parryware-slimline/ Commander-water bird

S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms) Complete.

S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm Complete.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

Taking down eaves gutter and rain water pipes (any size or pattern ) including all fittings, heads shoes bend swan necks etc at any position (measure overall as fixed along the centre line over fitting and accessories) all as specified and directed.

S& F PVC (SWR) pipe of 110mm dia single socketed in any length with rubber ring joints fixed to walls all as specified and directed

S&F PVC (SWR) bends or shoe of 110 mm dia bore

PVC (SWR) junction single, (Single T) 110 mm dia bore equal or unequal

M & L for repairing broken edges of chajja's, roof projection, Fascias etc in small widths/depths ( exposed area not exc 0.16 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , to match the exisitng surfaces incl removing debris , necessary scaffolding , etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately)

M&L for expanded metal n.exc 4Kg per square metre, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.

M & L for taking down and repairs in patches(area n.exc 2.00Sq min each patches) to plaster/loose surfaces of concrete slabs in sun-shades, chajjas, fascia,shelves, cills, landingsin cement mortar 1:4 /cement concrete 1:2:4 including all necessary arrangments for complete repairs all as specified and directed.(Note : Reinforcement/ expanded metal if any provided shall be measured and paid separately)

M&L mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as approved design and fixed to wall complete all as specified and directed.

S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design all as specified and directed.

M&L wall care putty 2mm thick including necessay preparation or already prepared surface complete all as specified and directed.

M&L complete removal of existing surface and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed

M&L preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying two coats of synthetic enamel paint over a coat of red oxide primer for change of existing colour complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails

M&L hardwood 2nd class 30mm thick Planed one side, with butt joints and fixed with nails supplied and fixed complete all as specified & directed.

M&L timber framed and fixed Second class hard-wood clean sawn in scantlings complete all as specified & directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each, complete all as specified & directed.

All as per above item No 111 but exc1.5 Sqm but n.exc. 4 Sqm, complete all as specified & directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium shutters, aluminium section weighing 0.55 Kg/m including necessary joining joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised alumnium snap beading, screws etc. complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and directed.

M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar

S&F cast brass fanlight pivot with plate size 25mmx65mm and suitable for shutter of 35mm thick complete.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples

M&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work.

S&F 4.00 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete all as specified & directed.

S&F 4.00 mm thick plain Sheet glass, area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete all as specified & directed.

S&F 12.00 mm thick toughened glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etccomplete all as specified & directed.

S&F 4 lever brass mortice lock vertical type size 65mm long complete all as specified & directed.

M&L preparation of old painted concrete surfaces of any description, not otherwise described, over 10cm width or girth including removal of sclaed paint and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth including removal of sclaed paint and applying one coats of synthetic enamel paint complete all as specified and as directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down and refixing ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No 130.04 above, here in before but using 2.5 sq mm single core copper conductor cable FRLSH of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm FRLSH copper conductor cable PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S&F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S&F Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S&F Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S&F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S&F lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

M&L Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire, complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S&F sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S&F MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S&F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S&F Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed

S&F LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Havells, Philips.

S&F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :-Havells Bajaj Philips

S&F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Philips, Havells.

M&L earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Supply and laying & testing and commisioning LT underground cable 25 Sq mm 4 core1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size complete all as specified and directed

Supply and laying & testing and commisioning LT underground cable 10 Sq mm 2 core1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size, complete all as specified and directed.

M/S.R.S.Chauhan and Sons

M/S ABDHESH CONSTRUCTION