GE/AFU-39/2024-25

Amount

B/R PORTION

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavation over areas not exceeding 1.5 m deep and getting out in hard / dense soil for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc complete all as specified and directed by Engr-in-Charge.

Removing excavated material not exceeding 50 m and deposited where directed at a level not exceeding 1.5 m from the starting point complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:4:8) type D2 with 40 mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for formwork to curved faces of walls, retaining walls, abutments, parapets ad staircase railings and similar work including attached pilasters, buttresses etc, vertical or to batter, fair finished sufaces complete all as specified and directed by Engr-in-Charge.

M&L for providing cement concrete type C-1, 1:3:6 (20mm graded aggregate in lintels upto 1.5m clear span, cills, steps: seismic and other similar bands, plinth course, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' brick straight of curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 25 mm thick cement concrete, type B-1, 1:2:4 (20 mm grades stone aggregate as in floors complete all as specified and as directed.

Material and labour for Machine cut kota stone flooring 20-25mm thick over 20mm thick screed bed in CM 1;4 laid and jointed with gray cemnet slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out and getting out in any type of soil all as specified and directed.

All as per above item no 12 above but depth exc 1.50 m not exc 3.00 m deep and getting out in any type of soil all as specified and directed.

M & L for Plain cement concrete type C-2 1:3:6 ( 40 mm graded aggregates ) in foundations filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with subclas 'B' bricks in one brick honey comb walling, built in CM (1:4) as curved on plan not exc 6.00 m in radius complete all as specified and as directed.

M&L for loose filling with broken bricks aggregate of gauge 80 to 150 mm in sokage well complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landinqs and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat) complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over cut to length, bent to shape req. including cranking, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for round bars 10 mm dia and over cut to length, bent to shape req. including cranking, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L for rendering 15 mm thick plaster on wall surfaces in CM (1:4) finishing the surface even and smooth without using extra cement all as specified and directed .

M & L for Reinforced cement concrete Type B 1 1:2:4 (using 20 mm graded stone aggregate (nominal mix) as in partition walls, and the like complete all as specified and as directed.

Removing excavated material (soils) n.exc 50.00 m and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and as directed.

M & L for 100mm thick cement concrete type B1 1:2:4 as in band using (20mm graded aggregate) complete all as specified and as directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for cover slab set in CM 1:6 including necessary form work complete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in deep for foundation etc, or for shafts,wells, cesspits, manholes etc,not exceeding 10 Sqm on plan and n. exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & as directed.

M & L for Plain Cement Concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed of drain pipes 100mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

S&F 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints complete all as specified and directed by Engr-in-Charge.

S & F 100 mm bore cast iron cowls complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description, n exc 10cm in width or girth when unconnected with other paintingand applying two coats of black japan paint over a coat of red oxide primer complete all as specified and directed.

Excavation in trenches for foundation, laying of cable / laying of pipe not exceeding 1.5 M wide and not exceeding 1.5 m in depth and getting out in Soft/loose/ hard soil,complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation, filling mass concrete complete all as specified and directed.

Material and labour for Reinforced cement concrete Type B 1 1:2:4 (12.5mm graded) as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for rendering 5mm thick in cement mortar (1:3) on brick work or concrete surfaces as in soffits of slab, complete all as specified and directed.

Material and labour for applying three coats of white wash on new plastered surface of ceiling including preperation of newly plastered surface complete all as specified and directed.

Material and labour for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,complete all as specified and directed.

Supply and fix sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed .

Supply and fix 32mm dia PVC waste pipe with cap socket suitable for 32 mm waste coupling complete all as specified and directed.

Supply and fix grating doom 100 mm dia with waste holes of PTMT complete all as specified and directed.

Supply and fix 75 mm size (SWR) floor trap,plain with gratting including jointing with solvent cement complete all as specified and directed.

Supply and fix stop valve fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions size 15mmcomplete all as specified and directed.

All as per item No 43 here in before but concealed type with long shank and cup

Supply and fix Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed.

Supply and fix 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fix GI tubes medium grade with all fittings and fixed complete to walls 20 mm dia bore, complete all as specified and directed.

All as per Item No 47 above but 15mm dia bore,complete all as specified and directed.

Material and labour for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Supply and fix 18mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.

Supply and fix 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

Supply and fix 75 mm Brass handles, cast type, polished bright complete all as specified and as directed.

Supply and fix 30mm (width of flaps) Continous (Piano) hinges,mild steel,bright finish or electrogalvanised complete all as specified and as directed.

Supply and fix stainless steel magnet catcher of size 55mmx30mmx15mm for wooden pannel, complete all as specified and as directed.

Supply and fix 2nd class hard wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Preparation of newly wood base surfaces any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) , over a coat of pink primer complete all as specified and as directed

Supply and fix plate rack made of stainless steel 0.63mm thick of size 600 x 750mm fixed to wall and including angle iron brackets of suitable size grouted in cement concrete complete all as specified and as directed

Retruning filling in including spreading, leveling, watering and well ramming in layers not exc 25cm as directed complete all as specified and directed by Enginner-in-Charge.

E/M PORTION

Supply and fixing of LED flood light fitting 1x120 watt Flame proof, CMRI certified recommended for gas/vapor group of IIA & IIIB,zone 1 and zone 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass,with LED light driver,holders,connectors etc complete all as specified and directed by Engr-in-Charge..

Supply, Laying and testing of XLPE cable 25 sqmm 3.5 core insulated screened PVC bedded galvanized steel strips or wire armoured, cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade and connecting laid in trenches, under floors/ roads or on walls complete all as specified and directed by Engr-in-Charge of following sizes :- Earth work, excavation shall be measured & paid separately under respective item of Schedule and wherever cable laying on walls and uses of thimbles, Clamps, fastner,nut,bolt and washers etc rates shall deemed to be included in the quoted rates).

Sand cushinoning in trenches for cushioning of LT underground cable including spreading, leveling, well ramming in layers all as specified and directed by Engr-in-Charge. Note :- Thickness of sand cushioning shall be the thickness after punning down.

M&L for Common burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed for cable protection complete all as specified and directed by Engr-in-Charge.

M&L for GI tubing 40 mm bore light grade, as in protection pipe for passing through cable etc fixed on wall/poles or laid in trenches/ducts or across road including necessary clamps required complete all as specified and directed by Engr-in-Charge.

M&L Earthing complete as per electrical plate No 3 of MES SSR Part I with galvanised steel plate earth electrode 60 cm x 60 cm x 6.0mm, burried directly vertically in ground in a pit of depth not less than 2.5 metres below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to and including galvanised iron or steel earth strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel. Earthing wire protected by galvanised iron or steel pipe 50 mm bore medium grade and connected to continuous earth wire on pole/ test point. Watering pipe shall be 20mm bore GI medium grade. The earthing shall be inclusive of excavation and earth work in any type of soil,charcoal, salt,funnel , PCC pit and RCC cover complete all as specified & directed. Note 1- following items deemed to be included in quoted rate (a) Earth electrode. (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 metre. (c) Material and labour for connecting earth electrode and earthing lead as specified. (d) Adequate quantity of charcoal dust and common salt as per direction. (e) All labour involved including testing of earth net work. (f) Excavation and earth work or drilling hole for electrode. (g) P.C.C. pit and C.I. cover. (h) Funnel with watering pipe, wire mesh and copper lugs etc. as specified. (j) G.I. protection pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. Note 2 - On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

M&L for of MCB SP 5 to 32Amps, 240 Volts, having breaking capacity 10 kA, 'C' charactersticks and current carrying apacity in the MCB complete with testing and commissioning as specified and as directed by Engr-in-Charge.

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm galvanised iron strip complete all as specified and directed by Engr-in-Charge

M&L for Explosion proof point wiring for for one light/bell/buzzer with 1.5 Sqmm 1100 Volts grade PVC FRLS insulated fire retrardent multi stranded flexible copper conductor cable in and including ERW rigid steel conduit ISI marked with all flame proof conduit fittings and accessories fixed on walls/ceiling with proper fixing arrangment including one number continuous run of 1.5 Sqmm PVC insulated fire retardent solid copper conductor cable as earth continuity conductor fixed to earth terminal and metallic body of light fittings/fan and socket etc complete all as suitable for Class Zone IE Ex II C for one light point controlled by one way switch, complete all as specified and directed by Engr-in-Charge.

Explosion proof rotary switch single pole on and off with cable termination box of 16 Amps rating 230 Volts Class E EX II C suitable for class I Zone I, all as specified.

Supply and fixing steel body flame proff exhaust fan, AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed

Supply and install HOT and COLD type invetor split smart AC Copper wound wall mounted indoor/outdoor complete with cordless remote control unit of capicity of 2.0 ton 3 Star ,cooling capicity 6350 watt heating capicity 5600 Watt,R-32 , refrigrant,low indoor noice less than 48 DB, dust filter Air Purifier stablizer free operation, Cu connecting pipe length upto 5 Mtr/ connecting cable upto 5 mtr including outdoor unit mounting with bracket making holes in wall and making good complete all as specified and as directed. Make :(Loyed/Hitachi./O General )

Supply and fix Voltage stabilizer for automatic operation, single phase intelligent time delay system high and low voltage cut of having ABC body and voltage range 170-280,15 Amps ,suitable for 2 ton AC for invetor motor AC complete all as specified and directed by Engr-in-Charge .

M&L for Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid concealed PVC conduit ISI Marked , heavey duty and connected to main board and making good disturbed surface complete all as specified and as directed. Note: Two runs each of 6.00 sqmm cable and one RM of 6.00sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M&L for Sheet metal enclosures for single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 20 Amp 240 Volt complete all as specified and as directed.

Supply and laying GI water tubing for 80mm bore, medium grade galvanized with all fittings (such as tee, elbow, flanged, long socket, union, short pieces) and fixed to wall or ceiling or laid in floor, duct and trenches etc complete all as specified and directed by Engr-in-Charge Note : Rate quoted included road cutting / wall floor and making good damaged portion matching with existing suface with all existing finishes.

S&F gun metal gate valve (ISI) marked with inner wheel head, screwed both ends in iron pipe and fixed in 80mm dia complete all as specified and directed by Engr-in-Charge

S&F GI fitting (any type any size) radius and angle tappers any type straight bends, increasing / decreasing or double socket tee pieces single branch 'Y' junction double branch, colars, caps and plugs etc complete all as specified and directed by Engr-in-Charge

ANIKET TRADERS (BID ID -3159546)