Loading
Loading…
Loading…
Tender Value
₹3.1 Cr
EMD Value
₹6.3 L
Closing Date
15 Jun 2026, 4:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
DRM Priority Work
S AND T
14 conditions · 2 needing a document upload
Financial Eligibility Criteria ( para 10.2 of GCC 2022 )The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Ref:GOI, Ministry of Railways, Railway Board, New Delhi. Advance Correction Slip No.1 of IRGCC ,April 2022 Lr.No.2022/CE-I/CT/GCC- 2022/Policy Dt:14.07.2022 )
Technical Eligibility Criteria ( 10.1 part 1 of GCC 2022) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub letted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Execution of Panel Interlocking or Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Alteration to Existing Panel Interlocking / Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Provision of IBS works in panel Interlocking or Electronic Interlocking sections. OR Provision of Automatic signalling with Axle counter/Track circuits or both together. OR Provision of UFSBI/BPACs/Digital Axle counters at Panel Interlocking stations/Electronic interlocking stations. OR Interlocking of LC gate with MACLS
14 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We have visited the works site and I/ We am/ are aware of the site conditions and IRGCC 2022,Correction slips of the GCC.
Signalling arrangement in connection with Interlocking of Three (3) number of LC gates (LC. No. 42, 24 & 15) of NZB - PDPL section with lengthy block sections and above 10000 TVU's on SC Division.
C_SG_36_604
C_SG_36_604
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹6.3 L
15 Jun 2026
22 May 2026
1 Jun 2026
219 items across 4 schedules · ₹3,12,51,280.06 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of 60 core Indoor Cable with 0.6mm conductor diameter as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. ( TO BE INSPECTED BY RITES) | Kilometre | 0.30 | 1,91,009 | 57,302.7 |
| 2 | Supply of GKP type Location Boxes Full size as per drg. No. S&T/MFT/T.2378( TO BE INSPECTED BY RITES) | Numbers | 18.00 | 16,216 | 2,91,888 |
| 3 | Supply of GKP type Location Boxes, Half size drg. No. S&T/MFT/T.2378 ( TO BE INSPECTED BY RITES) | Numbers | 12.00 | 8,083 | 96,996 |
| 4 | Supply of 'E'type lock of specified ward as per requirement with one key E-type lock to DRG. No.SA3376/M or latest and specification IRS: S30-64 or latest. Ward number of E type lock as per the requirements and as per the site supervisor instructions. ( TO BE INSPECTED BY RITES) | Numbers | 30.00 | 1,051 | 31,530 |
| 5 | Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19).( TO BE INSPECTED BY CONSIGNEE) | Numbers | 122.00 | 195 | 23,790 |
| 6 | Supply of relay fixing frame for full location box. The frame shall be of approximate size 940mmx150mm and made with powder coated MS angle of 25mmx25mmx 3mm. The frame shall have suitable holes to fix in full location box..( TO BE INSPECTED BY CONSIGNEE) | Numbers | 18.00 | 853 | 15,354 |
| 7 | Supply of relay fixing frame for half location box. The frame should be of approximate size 470mmx150mm and made out with powder coated MS angle of 25mmx25mmx3mm. The frame should have suitable holes to fix in half location box.( TO BE INSPECTED BY CONSIGNEE) | Numbers | 12.00 | 427 | 5,124 |
| 8 | Supply of Surface Base 140mm dia. CLS post as per DRG.. No. S 2011/M ( TO BE INSPECTED BY RITES) | Numbers | 18.00 | 3,476 | 62,568 |
| 9 | "Supply of CLS Post 140mm dia to specification IRS:S 6-81 Rev.3 or latest 3.5 Meters long"( TO BE INSPECTED BY RITES) | Numbers | 6.00 | 4,442 | 26,652 |
| 10 | "Supply of CLS Ladder set complete with staging/platform, supports, cast iron ladder base/Shoe. Ladder for 3.5m post as per DRG.. No. SA 23150, S 2033 or latest" ( TO BE INSPECTED BY RITES) | Set | 6.00 | 5,226 | 31,356 |
| 11 | "Supply of CLS Post 140mm dia to specification IRS:S 6-81 Rev.3 or latest 4.5 Meters long"( TO BE INSPECTED BY RITES) | Numbers | 12.00 | 4,710 | 56,520 |
| 12 | "Supply of CLS Ladder set complete with staging/platform, supports, cast iron ladder base/Shoe. Ladder for 4.5m post as per DRG.. No. SA 23150, S 2033 or latest"( TO BE INSPECTED BY RITES) | Set | 12.00 | 6,432 | 77,184 |
| 13 | "Supply of Metallic (MS) colour light Signal Unit. 2 aspect complete as per DRG.. No. SA. 23003/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest" ( TO BE INSPECTED BY RITES) | Numbers | 12.00 | 12,998 | 1,55,976 |
| 14 | "Supply of Metallic (MS) colour light Signal Unit. 3 aspect complete as per DRG.. No. SA. 23003/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest" ( TO BE INSPECTED BY RITES) | Numbers | 18.00 | 17,623 | 3,17,214 |
| 15 | 4 aspect complete as per DRG. No. SA. 23001/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest.( TO BE INSPECTED BY RITES) | Numbers | 3.00 | 18,820 | 56,460 |
| 16 | "Supply of Plug-in type miniature tractive armature Non-AC immune, DC neutral line relay complete with plug board, retaining clip/ATC Clip and connectors as per specifications BRS 930, IRS:S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable)." QN1- 8F/8B, 24 V DC. The interlocking code: ABCDF.( TO BE INSPECTED BY RDSO) | Numbers | 60.00 | 4,400 | 2,64,000 |
| 17 | QN1-12F/4B, 24 V DC. The interlocking code: ABCDE. ( TO BE INSPECTED BY RDSO) | Numbers | 60.00 | 4,283 | 2,56,980 |
| 18 | QN1-8F/8B, 50V.The interlocking code: ABDEF.( TO BE INSPECTED BY RDSO) | Numbers | 30.00 | 6,753 | 2,02,590 |
| 19 | QN1-12F/4B, 50V. The interlocking code: ABCEF. ( TO BE INSPECTED BY RDSO) | Numbers | 30.00 | 6,544 | 1,96,320 |
| 20 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). QNA1- 8F/8B, Interlocking Code: ABDGH as per Spec BRS 931 A or Latest( TO BE INSPECTED BY RDSO) | Numbers | 60.00 | 4,738 | 2,84,280 |
| 21 | QNA1-12F/4B, DC Neutral Line Relay, Interlocking Code: ABDFH as per Spec BRS 931 A or Latest ( TO BE INSPECTED BY RDSO) | Numbers | 60.00 | 4,413 | 2,64,780 |
| 22 | QNA1K-6F/6B, Interlocking Code: CDEKY as per Spec BRS 931 A or Latest and RDSO letter No.STS/E/Relays/UEA (PI) dated 30/05/97 (Annexure-II). ( TO BE INSPECTED BY RDSO) | Numbers | 30.00 | 5,062 | 1,51,860 |
| 23 | QSPA1- 8F/4B, The interlocking code: ABDEJ, Spec BRS 933A or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 30.00 | 6,465 | 1,93,950 |
| 24 | Supply of AC immune, plug-in type, Style 'QTA2', 2F/1B DC Neutral track relay for railway signalling track circuits with coil resistance 9 ohm, complete with plug board, retaining clip and connectors as per specifications: BRS 939A & 966 or Latest, IRS:S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable) with interlocking code FGHKX. ( TO BE INSPECTED BY RDSO) | Numbers | 4.00 | 4,806 | 19,224 |
| 25 | Supply of ECR 4F/4B' for 110V AC lit LED signals, complete with plug board, retaining clip and connectors as per RDSO specification No.STS/E/Relays/AC Lit LED Signal/09-2002 Amd. 1 or latest, BRS 941A, IRS: S 23-88 Amd. 1 or latest, IRS: S34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). The interlocking code for this unit shall be ABDHK (with ATC clips). ( TO BE INSPECTED BY RDSO) | Numbers | 60.00 | 5,841 | 3,50,460 |
| 26 | "Supply of Fail-Safe Electronic Time Delay Device mounted on Q series relay band enclosed within Q series relay cover complete with plug board, retaining clip and connectors as per specifications IRS: 61-2000 Amd. 3 or latest, IRS: S23-88 Amd. 1 or latest, IRS: S 34- 68 Amd. 6 or latest IRS 67-85 (as applicable). The device shall work on 24V DC and shall give 24V DC output after the specified time delay. Time delay of 60 seconds. Interlocking code: AFHKY." ( TO BE INSPECTED BY RDSO) | Numbers | 30.00 | 2,544 | 76,320 |
| 27 | "Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest. Transformer-rectifier set with 230V AC input, 24V-30V DC output, 5A." (TO BE INSPECTED BY RITES) | Numbers | 6.00 | 25,960 | 1,55,760 |
| 28 | Supply of B type chokes to as per specification IRS: S65- 83 Amd.1 or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 30.00 | 2,313 | 69,390 |
| 29 | Supply of Track lead junction boxes fibre glass as per DRG.No.CWM-00597 of F.R.P material to and specification IRS:S 23 along with fixtures i.e., one MS angle 50mmx50mmx5mm, 0.9m long, two numbers of G.I pipes of 25 mm dia, 500 mm long along with nuts and bolts and 500 mm long (grommet bushes, 60 mm ARA terminals-2 No's). (This includes gromile bushes,60mm PBT Terminals). ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 16.00 | 1,546 | 24,736 |
| 30 | Supply of Channel bond pins 7mm dia single groove as per specification IRS: S 17-75 Amd.1 or latest. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 1000.00 | 3 | 3,000 |
| 31 | Supply o f titanium coated 7 . 2 m m drill bits of Bosch/Addision make.( TO BE INSPECTED BY CONSIGNEE) | Numbers | 300.00 | 146 | 43,800 |
| 32 | Supply of Distilled water for topping of secondary cells as per specification IS 1106 or latest. ( TO BE INSPECTED BY CONSIGNEE) | Litre | 1500.00 | 10 | 15,000 |
| 33 | Supply of Hydrometer as per IS: 3104 (Part II)- 1982 or latest ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 6.00 | 277 | 1,662 |
| 34 | Supply of Surveyor's Wheel (rodometer). ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 3.00 | 4,245 | 12,735 |
| 35 | Supply of Electric Track Drilling machine shall be suitable for operating on 110V, 50Hz AC / DC fully insulated and no-load RPM shall be 1900 / 1000 and the power input is 550W. Machine with suitable inter changeable track mounting stand and drilling to be designed with adjustable facility and along with a set of 20 no's of 7.2 mm dia Bosch MSS drill bit, Drill check dia. 13 mm and drilling dia in steel 8 mm/13 mm along with packing accessories. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 6.00 | 22,602 | 1,35,612 |
| 36 | Multi-strand, single core, copper conductor 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.5sq.mm) wire coil as per specifications IS 694:2010 or latest, IRS: S 76- 89 Amd. 3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge.(Item unit is Coil) ( TO BE INSPECTED BY RDSO) | Numbers | 240.00 | 1,153 | 2,76,720 |
| 37 | Multi-strand, single core, copper conductor 28/0.3 (28 wires, diameter of each wire 0.30mm) flexible wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour to be specified by Engineer in charge.( ITEM UNIT IS COIL) ( TO BE INSPECTED BY RDSO) | Numbers | 24.00 | 2,908 | 69,792 |
| 38 | Supply of 35 Sq.mm PVC insulated multi-strand, single core, copper conductor 277/0.4 (277 wires, diameter of each wire is 0.4mm) cable as per IS:694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100-meter coil. Colour to be specified by Engineer in charge. ( TO BE INSPECTED BY RDSO) | Metre | 300.00 | 391 | 1,17,300 |
| 39 | Supply of 16 Sq.mm PVC insulated, multi-stand, single core, copper conductor 127/0.4 (127 wires, diameter of each wire is 0.4mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. Colour to be specified by Engineer in charge. ( TO BE INSPECTED BY RDSO) | Metre | 300.00 | 178 | 53,400 |
| 40 | Supply of 10 Sq.mm PVC insulated, multi- strand, single core, copper conductor 140/0.3 (140 wires, diameter of conductor 0.3mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. ( TO BE INSPECTED BY RDSO) | Metre | 4200.00 | 124 | 5,20,800 |
| 41 | Supply of 200 way tag block as per specification IRS: S 77/2006 Rev. 1.0 or latest and DRG. No. SA 24751 or latest. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 3.00 | 1,439 | 4,317 |
| 42 | Supply of non-deteriorating type of fuse holders and fuse links 240V AC/DC as per specification IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) Fuse holder 20A capacity ( TO BE INSPECTED BY RDSO) | Numbers | 150.00 | 220 | 33,000 |
| 43 | Fuse link 1A / 2A / 6A / 10A / 16A / 20A as specified by Engineer In charge.( TO BE INSPECTED BY RDSO) | Numbers | 3000.00 | 31 | 93,000 |
| 44 | Suply of Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per RDSO DRG. No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 300.00 | 97 | 29,100 |
| 45 | Supply of Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per RDSO DRG. No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 450.00 | 406 | 1,82,700 |
| 46 | "Supply of modular terminal block (WAGO or similar) as per RDSO specification RDSO/SPN/189/2004 Ver. 3.0 or latest consisting the following parts: a) 2 conductor disconnect terminal block - 6 numbers b) End / intermediate plate suitable for 2 conductor disconnect terminal - 1 number c) Screw less end stop similar to WAGO Model No. 249-117 -2 numbers d) Insulated jumper WAGO Model 280- 402 - 5 numbers e) Din Rail - 0.1 metre per set (in length of 1 metre for every ten set)" ( TO BE INSPECTED BY CONSIGNEE) | Set | 450.00 | 703 | 3,16,350 |
| 47 | Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 Nos. ( TO BE INSPECTED BY CONSIGNEE) | Set | 6.00 | 64 | 384 |
| 48 | Supply of 2 Way powder coated Relay rack universal type as per DRG. No. S&T/MFT/291. The relay rack shall be supplied with scaffolding, stainless steel nuts and bolts for fixing the rack, supporting angles, frame mounting triangle base with 'J' bolts, insulation of required numbers and suitable inner frames to suit Q style relays / K50 pre wired tag blocks. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 6.00 | 14,847 | 89,082 |
| 49 | Supply of powder coated Cable termination rack of size 880mm x 2075mm made using 50mm x 50mm x 6mm (6mm thickness) MS angles. The cable termination rack shall be supplied with stainless steel nuts and bolts for fixing the rack, tripod bases and reel insulators (for K rack, P rack and power rack), cable ladder of 400mm width and 2075mm length with two angles of size 40mm x 40mm x 5mm (5mm thickness) and supporting flats of size 25mm x 25mm. Suitable holes shall be drilled to fit hylam sheet as per standard practice ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 6.00 | 7,585 | 45,510 |
| 50 | Supply of Hylam sheet, resin bonded, grade P3 as per IS specification IS 2036 of 1974 or latest of following size: Hylam Sheet of size: 2400mm x1200mmx6mm. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 6.00 | 7,124 | 42,744 |
| 51 | Hylam Sheet of size: 2400mmx600mm x6mm. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 6.00 | 3,430 | 20,580 |
| 52 | Hylam Sheet of size: 2400mm x600mm x3mm. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 6.00 | 1,888 | 11,328 |
| 53 | Supply of Aluminium lugs 25 sq.mm of reputed make. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 150.00 | 25 | 3,750 |
| 54 | Supply of Copper lugs 10sq.mm of reputed make. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 300.00 | 12 | 3,600 |
| 55 | Supply of Copper eyelets to suit 16/0.2 wire Dowell's or similar make. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 3000.00 | 3 | 9,000 |
| 56 | Supply of Copper eyelets to suit 10.sqmm wire Dowell's or similar make. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 1500.00 | 6 | 9,000 |
| 57 | "Supply of Remote Terminal Unit with dual modem as per specification IRS: S 99-2006 Amd. 3 or latest Remote Terminal Unit with 128 digital inputs and 16 analog inputs." ( TO BE INSPECTED BY RDSO) | Numbers | 3.00 | 3,82,594 | 11,47,782 |
| 58 | "Supply of Battery Charger of Various capacity 230V AC / 110V DC, 30A single phase, signalling / telecom. Installation as per specification IRS: S 86-2000 Amd. 4 or latest." ( TO BE INSPECTED BY RDSO) | Numbers | 3.00 | 1,10,464 | 3,31,392 |
| 59 | "Supply of Battery Charger of Various capacity 230V AC / 24-26-28V DC, 30A capacity as per specification IRS: S 86-2000 Amd. 4 or latest." ( TO BE INSPECTED BY RDSO) | Numbers | 3.00 | 55,373 | 1,66,119 |
| 60 | "Supply of Earth Leakage Detector (ELD) with configuration specified by Engineer In charge and as per specification RDSO/SPN/256/2002 or latest with insulated tester, test probes, Mounting stand and Fuse board to isolate from distribution board as per requirement of channels. Twelve channel Earth Leakage Detector." ( TO BE INSPECTED BY RDSO) | Numbers | 3.00 | 1,90,261 | 5,70,783 |
| 61 | Supply of 50mm x 6mm GI tape for interconnecting earth electrodes. ( TO BE INSPECTED BY CONSIGNEE) | Metre | 180.00 | 546 | 98,280 |
| 62 | "Supply of Tool Kit as under - 1. Standard Tool Bag (CANAVAS) - 1 No. 2. Soldering Iron (Make Soldern / Philips) - 60W / 230V -1 No. 3. Digital Multimeter - True RMS Meter (Philips / Fluke / Rishabh Rish 18S) Upto 20M, 10A, 5kHz, 2mV to 750V AC, 200V DC - 1 No. 4. Screw Driver set of 6 pieces (Taparia Make) - 1 No. 5. Cutting plier 6" (Taparia Make) - 1 No. 6. Side Cutter (Wire cutter) 6" (Taparia Make) - 1 No. 7. Nose plier 6" (Taparia Make) - 1 No. 8. Wire stripper (Taparia Make) - 1 No. 9. Fiber tape 3m length - 1 No. 10. Scale 6" (for measuring tongue rail opening) - 1 No. (Transparent Plastic Material) 11. Pop spanner wrench 6mm to 22mm (Auto adjustable spanner) of Taparia make - 1 No. 12. Pop spanner wrench 10 mm to 30 mm (Auto adjustable spanner) of Taparia make - 1 No. 13. Pop spanner wrench 15mm to 41mm (Auto adjustable spanner) of Taparia make - 1 No. " "14. Hacksaw frame with blade 6"", 4" width (for cutting cable) - 1 No. 15. Hammer 3.0 lb - 1 No. 16. Chisel 6" (for cutting bond wire) - 1 No. 17. Poker 8" (for removing bond wire, bond pin) - 1 No. 18. Heavy duty Screw Driver 12" with plastic handle (Taparia Make) - 1 No. 19. Test piece (Point wedge piece) - 1 No. 20. Multi colour rechargeable LED torch light - 1 No. 21.Universal key - 1 No. 22. Box spanner for 6 way terminals (13mm) - 1 No. 23. Nylon brush (for cleaning purpose) - 1 No. 24. Sealing plier - 1 No. 25. Crimping Tool (1.5 to 16sq.mm) - 1 No. 26. Feeler gauge - 1 Set 27. TSR Meter (for testing condition of track circuit) - 1No. 28. Wooden Block (60mm x 60mm) - 1 No. 29. Track shorting clips - 1 No. 30. Tester - 1 No. 31. Flat file 12" length x 1" width - 1 No. 32. Clip on meter - 1 No. 33. Digital Earth meter - 1 No. 34. Meggar - 1 No. " ( TO BE INSPECTED B Y CONSIGNEE) | Set | 3.00 | 46,332 | 1,38,996 |
| 63 | "Supply of basic material to construct unit Maintenance Free Earth as per specification RDSO/SPN/197 Ver. 1.0 or latest consisting of the following: a) Copper bonded steel electrode 3m long, 17mm diameter with copper bonding thickness mini 250 micron and UL listed and marked - 1 No. b) Earth enhancement compound of RDSO approved brand supplied in sealed bags of minimum 10kg - 3 Nos. c) Copper strip with dimensions 150 x 25 x 6mm to terminate earth rod - 1 No. d) Copper strip with dimensions 300 x 25 x 6mm Main Equi- potential Earth Bus bar (MEEB) - 1 No. e) Copper strip of with dimensions 150 x 25 x 6mm Sub Equi- potential Earth Bus bar (SEEB) - 1 No. f) 35 Sq.mm multi-strand PVC insulated Copper Cable (15 meter). "( TO BE INSPECTED BY RDSO) | Set | 9.00 | 16,837 | 1,51,533 |
| 64 | Supply of Cable Route Locator set consisting of receiver with active line trace frequency, passive line trace and depth measurement on active line tracing with 5 watts cable line transmitter with frequency indicator, power indicator, frequency mode sheet, power 'ON' & 'OFF' indicator mode toggle induction mode. High voltage warning and suitable rechargeable cells for both transmitter and receiver with suitable charger with carrying case. Make RIDGID SeekTech SR-20/ Stanlay ST-Loc 10 or equivalent or better as approved by Engineer In charge. ( TO BE INSPECTED BY CONSIGNEE) | Per Unit | 3.00 | 3,77,600 | 11,32,800 |
| 65 | Supply of FPD 1 cards of GGT-MSDAC ( TO BE INSPECTED BY RDSO) | Numbers | 12.00 | 31,860 | 3,82,320 |
| 66 | Supply of FPD 2 cards of GGT-MSDAC ( TO BE INSPECTED BY RDSO) | Numbers | 12.00 | 31,860 | 3,82,320 |
| 67 | "Axle detectors (each set consists of 2 numbers Tx and 2 numbers Rx coils) (Clamp type - Make: GGT transducers for MSDAC) " ( TO BE INSPECTED BY RDSO) | Set | 13.00 | 55,951 | 7,27,363 |
| 68 | Supply of HDPE jerry can of 20 litres capacity. The jerry can shall be supplied at site as per the requirement of site in- charge. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 6.00 | 154 | 924 |
| 69 | Supply of Godrej Navtal Locks with diameter of 50mm with 3 keys. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 30.00 | 563 | 16,890 |
| 70 | Supply of Double key lock for relay room. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 3.00 | 1,233 | 3,699 |
| 71 | Printing, Binding & supply of registers with latest proforma given by in-charge officer each register of 100 pages..(ITEM UNIT IS Per Regr.) ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 90.00 | 358 | 32,220 |
| 72 | Supply of Electrostatic Rubber Matting of thickness 2mm as per IS-15652/2006 with suitable adhesive material. ( TO BE INSPECTED BY CONSIGNEE) | Sqm | 36.00 | 2,390 | 86,040 |
| 73 | Supply of key chains with ring and plastic name plate of dimensions 60mm x 20mm x 3mm. The plastic name plate shall be engraved with station name on one side and key particulars on the other as specified by the site in-charge. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 30.00 | 34 | 1,020 |
| 74 | Supply of steel stools 18" height neatly finished and painted. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 9.00 | 489 | 4,401 |
| 75 | Supply of Fibre table of 4 Feet x 2 Feet one number and fibre chairs two numbers. They should be of standard make and quality like Neelkamal or Similar. ( TO BE INSPECTED BY CONSIGNEE) | Set | 6.00 | 2,099 | 12,594 |
| 76 | Supply of Godrej shelf storage of 916 x 486 x 1981 mm or similar( TO BE INSPECTED BY CONSIGNEE) | Numbers | 3.00 | 26,479 | 79,437 |
| 77 | Supply of 80 column Dot Matrix Printer Model No. Epson LQ300/LX300 or similar with serial port. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 3.00 | 13,177 | 39,531 |
| 78 | Supply of Printer for maintenance terminal at station - HP LaserJet 1020 Plus or similar. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 3.00 | 16,135 | 48,405 |
| Schedule total | ₹1,15,14,679.7 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ListofAnnexuresfortender.pdf
ATTACHMENT
TenderDocument604.pdf
ATTACHMENT
DRAWINGS.pdf
ATTACHMENT
GCC_April-2022__1.pdf
ATTACHMENT
Tele_Cir_9-2023.pdf
ATTACHMENT
MAKEININDIA2.pdf
ATTACHMENT
MAKEININDIA1_compressed1.pdf MAKE IN INDIA I
ATTACHMENT
Correctionslips.pdf
ATTACHMENT
MAKEININDIA1_compressed1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .