Supply of new pump motor with all accessories .. other Electromechanical components for water supply from newly installed big dia deep tube well to the distribution pipe line at different wards within EBM, Malda at ward no- 04, 06, 12 and 18 2nd Call

Supply & delivery of pumping machinery submersible pump excluding panel for unmanned operation, MK-Texmo/KSB/MBH c) From 21 HP to 25 HP inclusive of column pipe, valves special, submersible cable connection from motor to starter & starter to main switch (SOR PHE-2013)

Supply, Delivery & Installation of 415 V, 3 Phase, 50 hz Auto-manual 20 KW Star-Delta starter Control Panel for Sub. P/M Set. (as per enclosed details) Mk- Sellwin/Electromech/ AC Power/Equivalent as per direction of EIC. Ref: KMDA vetted Rate.

Supply, Delivery at site 1.1 KV grade Al rmoured cable of size 3.1/2 core 35 sq mm confirming to 1554/7098(PT) 1988 Mk-Havel or equivalent. Ref: KMDA vetted Rate

S & F MS top clamp 12 x 80 mm section for Sub P/M Set in two halves. Ref: Vetted Rate 8.07.021, MED.

Split type M.S fabricated suitable tube well cover for the tube well non-sign with necessary damping arrangement including holes for column pipe, air pipe & cable entry. Ref: -KMDA vetted Rate

Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe, making all electrical and water line inter-connection complete as per direction including supply of necessary materials as reqd. for the work. Ref:-KMDA vetted Rate

Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora. Ref: Vetted Rate 8.07.021, MED.

Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp, 240 V DP with fuse on L & N Make-Havells/Flora. Ref: -KMDA vetted Rate

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA-Medium GI pipe. PWD 2017, G-1

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. Ref: PWD-2014,P-G2,Sl-4a

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Ref: PWD-2014,P-G2,Sl-5a

Connecting the equpments/body to earth busbar including S&F 25 mmx6mm galvanised (Hot Dip) M.S flat on wall/ floor with GI shaddles as required and making connection to equipments with bolts,nuts and washers etc. Ref: EE(E/M)-JNNURM-1/12/2011/63 Dt.-26.03.2012

Add 18% GST on total value of item no 1 o 12

Add 1% CESS on total value of item no 1 o 13