CA NO. CWE SGNR-41 OF 2020-21 SPECIAL REPAIRS TO BR AND EM WORKS OF OR MARRIED ACCOMMODATION BUILDING NO. P-226 OF 01 TO 12 AT MILITARY STATION SRI GANGANAGAR

Amount

Taking down wooden shutters of any description and refixing in the same opening after repairing of size exc 1 sqm but not exc 2 sqm complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames of windows & Ventilators (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down shutter of any description not exceeding 1 sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down shutter of any description but exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for pressed steel door frame of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 06 here in before but for size 125 x 60mm complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and repared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for 35 mm thick Factory made IInd class hard wood plain framed panelled shutters (any number of Panels ) with lock rails and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces the size of rail and stile as per IS :1003 (Part -I) Klin Seasoned and chemically pressure treated complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Cement concrete 1:3:6 type C–1(20 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in - Charge.

Supply and fix for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in - Charge.

Supply and fix for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and directed by Engineer-in-charge

Supply and fixing for Aluminium window and ventilator shutters, side hung type without sash , aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos), suitable handle (1 No.) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for powder coated Aluminum Grill any pattern aperture size 50 mm and wire dia 5 mm fixed with Aluminum Frame complete all as specified and directed by Engineer - in - Charge. Note- Aluminum frame shall be Measured and paid seperately

Supply and fix for 3mm thick sheet glass ordinary quality and glazing with oil putty in each pane of size n exc 0.50 sqm complete all as specified and directed by Engineer - in - Charge.

Supply and fix for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Plain fillets or beading of sectional area Exc 3 & n. exc 6 sq.cm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, se-cured with nails or brads for securing wiremesh or similar works put together with glue pinned at joints in complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 25 mm thick block board grade 2 quality interior grade decorative face veneers on both face fixed with screw to frame work as in kitchen cabinet complete all as specified and directed by Engineer - in - Charge.

Supply and fix for Continuous (piano) hinges , mild steel , bright finish or electrogalvanised Width of flaps 30mm (when open) complete all as specified and directed by Engineer - in - Charge.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame with fire retardant grade unsaturate polysterresinn and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame.complete all as specified and directed by Engineer - in - Charge.

Supply and fixing 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in - Charge.

Supply & fix 100 mm long mild steel butt hinges cold rolled medium weight, fixed with steel screws complete all as specified and directed by Engineer - in - Charge.

Supply and fix for aluminium handles cast type anodised, 125 mm long complete all as specified and directed by Engineer - in - Charge.

Supply and fix for aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size complete all as specified and directed by Engineer - in - Charge.

Supply and for Aluminium anodised hasp and staple 100mm , with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer - in - Charge.

Supply and fix for Aluminium anodised hasp and staple 75 mm , with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer - in - Charge.

Supply and fix for aluminium anodised barrel tower bolts of extruded section and fixed 200 mm size complete all as specified and directed by Engineer - in - Charge.

Supply and fix for 300 mm aluminium alloy anodised sliding door bolts with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate 2 on staple plate complete all as specified and directed by Engineer - in - Charge.

Supply and fixing Mild steel 300 mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer - in - Charge.

Supply and fix for aluminium handles cast type anodised, 150 mm long complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs for aluminium anodised barrel tower bolts of extruded section and fixed 200 mm size complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repair aluminium handles cast type anodised, 150 mm long complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repair 300 mm aluminium sliding door bolts, clip type, stone enameled block with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, 4 on bolt plate 2 on staple plate complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 300 mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer - in - Charge.

Material and labour for 2nd class hardwood small fittings such as brackets of any type shaped door and window stops and the like including all necessary labour,article n. Exc 200 cucm each complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new steel surfaces over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed by Engineer - in - Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in - Charge.

Material and Labour for non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even and fairand pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

All as per serial item No 42 here-in-before but for in skirting / dado etc set and jointed in neet cement slurry over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for receiving tiles and pointed in white cement mixed with pigment to match the colour or shade of tiles complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

Demolition of cement concrete un-reinforced of sunken portion alongwith tiles and WC of any description including removing the debrises and cleaning the premises etc complete all as specified and directed by Engineer - in - Charge.

Material and Labour for water proofing treatment to RCC sunken slab as specified below and as directed by engr-in-charge:- (a) 15mm thick plaster in CM 1:3 with WPC on raised vertical surface. (B) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles ,dirt etc. (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces. (e) Provision of glass fibre mesh of 2x2 mm on above coating (f) Apply second coat of two component modified polymer coating after 72 hours (g) Laying concrete 1:4:8 over the coating as per requirement (h) Joining the sanitary pipe with non shrink cementatious grout (k) Complete the treatment to be carried out by authorised applicator of waterproofing manufacturer Make :- Dr. Fixit/Fosroc/BASF/STP NOTE : (i) The Treatment shall be carried out as per the manufacturers instructions and as directed by eng-in-charge. (ii) The plan area of floor shall be consider for payment. (iii) WPC shall be measured and paid saperately.

Material and Labour for cement concrete 1:5:10 Type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engineer - in - Charge.

Dismantling of stone slab and tiles of any description or thickness in floors aprons, laid bedded and pointed in any mortar etc complete all as specified and directed by Engineer - in - Charge.

Material and Labour for machine cut Kota stone slab flooring 20-25 mm thick over 20 mm thick screed base in cement 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing and polishing complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 50 here in before but on vertical surfaces over 10mm rendering in cement mortar 1:3 finished even and fair, complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 20 mm thick Green marble machine cut in skirting/dado, sehlves etc laid over 10 mm thick cement mortar 1:4 screed set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preglazed chequered cement concrete tiles of size 20cmx20cmx25mm thick set jointed and pointed in neat cement slurry in floor laid over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed by Engineer - in - Charge.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graged aggregate as in sub -floor complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 75mm thick cement concrete type C-2, 1:3:6 using 40mm graged aggregate as in plinth protection complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 15mm bore bib taps fancy type chromium plated, cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs, 15mm bore chromium plated stop valves, cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repair Grating doom 125 mm dia PTMT(minimum weight 25gms) complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer - in - Charge. Make : Cat No-501/701 (Prayag), E-8055 (Parryware)

Supply and fix in repairs water closet vitreous china squatting pan "Orissa pattern" size 580mmx440mm white with integral foot rests (Excluding flushing cistern) including all joints and connection to trap, CI 'P' trap/S trap etc and making good to the floor complete all as specified and directed by Engineer - in - Charge. Make : Cat No-4053 (Prayag), CO117 (Parryware), Calino-S3010101 (Cera)

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer - in - Charge.

Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

Taking up or down for 15 mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as serial item No 65 here-in-before but for refixing same with new fittings only complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for steel water tubing galvanised 20 mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as serial item No 67 herein-before but for refixing same with new fittings only complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs, Gun-metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20mm bore iron pipe or brass ferrule complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs, Gun-metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 15mm bore iron pipe or brass ferrule complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs, cromium plated shower rose of size 125mm with or without joints as specified including fixing to pipe or union complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs, white colour rotational moulded polyethylene water storage tank 500 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge. Note : PVC tanks shall be ISI marked and having three layers

Supply and fix in repairs, 20mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs, fancy type curtain rod 25 mm dia with brackets and knob etc all as specified and directed by Engineer-in-charge.

Dismantling cast iron work of any description and any position complete all as specified and directed by Engineer - in - Charge.

Supply and fix for 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed by Engineer - in - Charge.

Supply and fix for 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge.

Supply and fix for 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.

Supply and fix for 75mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.

Material and Labour for salt glazed stone ware gully traps 125x100mm square or round mounted type P complete all as specified and directed by Engineer - in - Charge.

Material and Labour for CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed by Engineer - in - Charge.

Material and Labour for CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed by Engineer - in - Charge.

M&L for bands straps supports or stay for rain water ventilating pipes or similar works including bolts conforming to Fe-290, Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall including taking down of rainwater pipes complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 100mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 75mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.

Dismentling of brick tiles single layer on roof complete all as specified and directed by Engineer-In-Charge.

Demolition of old mud phuska removing rubbish off the premises cleaning surfaces and preparing to receive treatment complete all as specified and directed by Engineer-In- Charge.

Material and Labour for roof treatment to RCC roof as follows:- (a) Cutting & uprooting grass on roof top,removing rubbish off the premises, cleaning the roof surfaces throughly using wire brushes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc complete. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @ 100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP based membrane, (mineral finish) minimum weighing 3 Kg/Sqm reinforced with non woven polyster fabric ( weight not less than 150 gms/Sqm) by Torch application. the overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by Engineer in charge. Makes:STP, Dr Fixit/Pidlite, Texsa India Ltd Notes: (i) All joints and change in directions should be covered with cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement /as per site requirement and cured well before laying membrane by torching. (ii) All angles and abutments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved by GE before carrying out the work. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having facilities for testing of membrane. (v) The guarantee of treatment shall be of minimum 10 years reckoned from date of completion of whole work.

Material and Labour for cement concerete 1:3:6 type C-2 (40mm graded aggregate) as in filling and mass concerete etc complete all as specified and dirceted by Engineer-In-Charge.

Material and Labour for heat resistant aluminium painting on roof water proof surface complete all as specified and directed by Engineer - in - Charge.

S&F in repairs welding in any thickness of metal to be welded will be exceeding 9 mm but not exceeding 20mm complete all as specified and directed by Engineer - in - Charge.

Demolition of RCC slabs, chajjas and similar items complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Reinforced Cement Concrete 1:1½:3, Type A–1 for slabs supported on walls, beams, columns and in shelves, the like complete all as specified and directed by Engineer - in - Charge.

Form work to soffits of suspended slabs, such as roof slab, chajjas and similar work not exceeding 200mm thick with rough finished surface of concrete complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 99 here-in-before but for 5 mm dia and over upto and including 10 mm dia in stirrups, space and binders complete all as specified and directed by Engineer - in - Charge.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 12mm thick rendering in cement mortar 1:6 in fair faces of brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 15mm thick rendering in cement mortar 1:4 in other than fair faces brick or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 5 mm thick rendering in CM 1:3 on fair faces of concrete surfaces on patches as on ceilings finished even and smooth complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new plaster surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new plaster surfaces and applying two coats of oil bound distempering over chalk whitening on new plastered surfaces complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new plaster surfaces and applying two coats of cement base paint over a coat of white wash on new plastered surfaces complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and removing all dirt and dust by watering making surface even and smooth and then applying two coats of cement base paint over well prepared old decorated plastered surface etc all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and smooth and complete and then appplying two coats of white wash on old decorated plastered or un-plastered surfaces of walls etc all as specified & directed by Engineer-in-Charge.

Material and Labour for preparation and complete removal of existing treated /painted old plaster surfaces and applying two coats of oil bound distemper complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of old decorated plaster surfaces and applying a coat of white wash on ceiling complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of old painted wood and wood base surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of old steel surfaces over 10 cm width or girth, not otherwise described and applying one coat of applying synthetic enamel paint complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Writing letters or figures with fluorecent paint ( Block. Roman, Italic or Indian) n exc. 30 cm high etc complete all as specified and directed by Engineer - in - Charge.

Demolation of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches,pillars,etc, complete all as specified and directed by Engineer - in - Charge.

Material and Labour for brick work with sub class 'B' Bricks, well burnt straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 117 here in before but except bricks complete all as specified and directed by Engineer - in - Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in Cement mortar 1:3 etc complete all as specified and directed by Engineer - in - Charge.

Material and Labour for concealed conduit point wiring complete for light on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and 1. 2 mm thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.

All as per Srl item No. 120 here-in-before but for one switch socket combination 5/6 Amps on independent board complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 120 here-in-before but for one thee pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 120 here-in-before but for one switch socket combination 6 Pin 5/15 Amps on independent board with 2.5 Sqmm copper cable complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 120 here-in-before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 120 here-in-before but for call bell point complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs switch piano flush type 5/6 Amps single pole two ways complete all as specified and directed by Engineer – in - Charge.

Supply and fix in repairs bell push flush type 5 Amps complete all as specified and directed by Engineer – in - Charge.

Supply and fix in repairs switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.

Supply and fix for ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed by Engineer - in - Charge.

Supply and fix for electronic bell AC 230 Volts single pole ding dong type complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs light fitting with LED batten with aluminum housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz, 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/2 mm upto ceiling rose/connector complete all as specified and directed by Engineer-in-Charge. Make : Havells cat part No : LUMILINEPLUSBS20WLED865SPCSS, Bajaj cat part No : BCLSBAL 20W CW, Crompton cat part No : CCS-100-20-65-HL2-DP-NWH

Supply and fix for angle holder insulated body with back plate for conduit fittings including LED bulb 9 W complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs water tight bulk head fitting, comprision of connector galvanized cast iron back plate, water proof enamelled gallery glass well, and including 10 watt LED lamp complete all as specified and directed by Engineer-in-Charge. Make : Havells cat part No : HEXAFT10WLED857SSYMBOPC, Bajaj cat part No BIBWP 10W LED, crompton cat part No LBHP-10-CDL

Supply and fix in repairs stepped type electronic fan regulator flush type for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge

Supply and fix in repairs sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in PVC conduict including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. Note : PVC cable and PVC conduit shall be ISI marked

Supply and fix in repairs sheet metal enclosure for double door BDs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs MCCB TP&N 40 Amps with breaking capacity 16 KA, fixed TM and 415 Volts AC Supply ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs MCB 'B' series type suitable for 240 Volts, AC supply 5 to 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to GI earth lead 4 mm dia GI earth wire, by means of bolts, nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs/Sqmm) and frame of angle iron 25mm x 25mm x 6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out 40mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 mtr all as per electric plate No. 3 of SSR Part-I and connecting to earth test point including taking out unserviceable earthing with all accessories all as specified or indicated including testing on completion all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs security light fitting LED type 25 watt with all necessary accessories, clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 Hz AC & Supply and fixing to wall/on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore" light grade" brackets 2 mtr length bent to shape obtained required shape including clamps, nuts/bolts/washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer-in-Charge. Make : Havells cat part No : ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj cat part No BRLEP25W LED WH, Crompton cat part No LSTS-25-CDL-M

Supply and fix in repairs sheet metal enclosure for double door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 250 Amps busbar stove enameled dust and vermin proof, IP : 43 protection suitable for incorporation FP MCCB (V-Tech) N1 Frame upto 125A, Isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed by Engineer-in-Charge.

Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified & directed by Engineer-in-charge.

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .

M & L for sand cushioning with river washed and screened dry fine sand to under ground cable after laying the cable gently punning down complete all as specified and directed by Engineer-in-Charge. NOTE:- Thickness after punning shall be considered for payment.

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge.

Supplying, laying, jointing and testing and commissioning of 16 sqmm, 4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. Note :Excavation, earth work, sand cushioning and brick protection required for item shall be measured and paid separately under respective items of BOQ.

S&F in replacement of meter box of size 0.9m x 0.9m x 0.2m made out of CRCA mild steel sheet, thickness 2.25mm double door, single opening with lock arrangement and transparent glass for meter reading suitable for fixing 04 electric meter and VTPN DB box including taking down existing electric meters, refixing them with two single core PVC copper conductor unsheathed wire multistranded 4 Sqmm, properly painting on meter box complete and fixing in wall with suitable cutting, cement work etc. complete all as specified and directed by Engineer-in-Charge. ---------------------------------------------------------------------------------------------- Note : A sum of Rs. 1,02,851.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 33 & 34(R) (Schedule of Credit) of Tender document

M/S BUDHRAM BISHNOI

J and P CONTRACTOR

PAREEK AND COMPANY

KHANNA CONSTRUCTIONS