Filling of soil and construction of boundary wall and pathway all around the under construction convention centre complex at Nakaha No. 2.

Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5m. & lead upto 30m. Including filling , watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or in to the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches. (Excluding Royalty) (S.I.No-251)

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)(DSR-4.1.8)/2023

R.C.C. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone grit in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item. As in item 283 above but in R.C.C. Raft foundation and footing with 4 cm. (1½: ) gauge approved stone ballast. S.I-287

R.C.C. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone grit in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item. As item no 283 but on R.C.C columns in 1:1.5:3 S.I-289

R.C.C. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone grit in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item. As in item (283) above but in R.C.C. T-beam and slab roofs and R.C.C. columns. S.I-288

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (D.S.R. 5.22.6/2023)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) (D.S.R 6.4.1/2023)

12 mm thick plaster in 1:4 cement and coarse sand mortar SI-584(a)

Applying priming coat With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood DSR 13.50.2)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface (D.S.R 13.112.1/2023)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (D.S.R.10.1/2023)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture D.S.R 13.48.3/2023

Construction of embankement with material obtained from borrow pits (Lead upto 10km) (Analysis as per MORTH specification 305)

P/A of mural painting on boundarywall including all finishing work

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work (D.S.R. 13.52.2/2023)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (D.S.R 6.1.1/2023)

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.

P/L factory made chamfered edge cement concrete paver blocks in foothpath 80mm thick C.C. paver block of M-35 grade with approved colour design and pattern D.S.R 16.91.2/2023

R.C.C. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone grit in the proportion of 1:1.5:3 in Drain cover and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.l. binding wire and including Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item. (SOR 284A/CH-5)