Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
26 Nov 2026, 1:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Annual Contractual Turnover Data for the Previous 3/4 Years should be submitted as per Annexure-IX.(AnnexureVIB of Tender Documents).
Technical Eligibility Criteria: (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(i): Separate completed works of minimum required values for each component shall also be considered for fulfillment of technical eligibility criteria. ( c) Similar nature of Work is defined as "Similar nature of Work is defined as "Supply, installation, testing and commissioning of any LT/HT Electrical Work. ." Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar nature of Work is defined as "Supply, installation, testing and commissioning of any LT/HT Electrical Work".
39 conditions · 9 needing a document upload
Check List: The tenderer(s) would fill up the check list, as per Annexure-XXIII to ensure that they are submitting the complete tender offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Improvement of Electrical Asset by Provision of Underground LT Cable Network at DBRG Colony and JTTN Colony
LV-T-14-TSK-969~NFR
LV-T-14-TSK-969
Open
Works - General
8 Months
Tinsukia, Assam
₹0
₹4.0 L
4 Nov 2026
4 Nov 2026
12 Nov 2026
39 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,01,71,661.5 | ||
| — | 80.00 | — | — | ||
| Supply, installation, testing and commissioning of decorative LED lamp pole, made of suitable die-cast/aluminium/steel construction, approximately 5.0 m overall height, with 75 mm dia top section for 2.8 m length, 60 mm dia mid section for 1.2 m length and 114 mm dia base section for 1.0 m length, complete with suitable base plate, foundation bolts, access door, cable entry provision, internal wiring and all necessary hardware/accessories, duly finished with suitable weather-resistant protective coating, erected on suitable RCC foundation including grouting, alignment and making the installation complete in all respects. | — | — | — | 14,32,000 | |
| — | 40.00 | — | — | ||
| Supply and installation of single-arm U-shaped decorative bracket of approximately 1.0 m projection, fabricated from suitable corrosion-resistant steel section, structurally adequate to withstand applicable wind loads and support the specified luminaire, complete with clamps, mounting arrangement, fasteners, nuts, bolts and all necessary accessories, duly painted/powder- coated with weather-resistant finish matching the decorative pole, suitable for mounting on 5.0 m decorative pole, complete in all respects as directed by the Engineer-in-Charge. | — | — | — | 3,80,000 | |
| — | 40.00 | — | — | ||
| Supply and installation of double-arm U-shaped decorative bracket with approximately 1.0 m projection per arm, fabricated from suitable corrosion-resistant steel section, structurally adequate to withstand applicable wind loads and support the specified luminaires, complete with clamps, mounting arrangement, fasteners, nuts, bolts and all necessary accessories, duly painted/powder-coated with weather-resistant finish matching the decorative pole, suitable for mounting on 5.0 m decorative pole, complete in all respects as directed by the Engineer-in-Charge. | — | — | — | 6,68,000 | |
| — | 80.00 | — | — | ||
| Supply, installation, testing and commissioning of 45 W decorative LED street light fitting, suitable for operation on 230 V AC, 50 Hz, complete with high-efficiency LED source, suitable polycarbonate (PC) diffuser, integral/remote LED driver, in-built surge protection, minimum IP-65 protection against dust and water ingress, and all necessary mounting accessories, suitable for fixing on the specified single-arm U-shaped decorative bracket, including electrical connection, proper aiming, testing and commissioning, complete in all respects as directed by the Engineer-in- Charge. | — | — | — | 12,64,000 | |
| — | 1200.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of 1.1 kV grade, XLPE- insulated, PVC/PE-sheathed, aluminium conductor, armoured power cable of size 120 sq. mm, 4- core, conforming to relevant IS standards, including laying in trench/pipe/duct as required, cable dressing, proper routing and identification, suitable cable glands, aluminium lugs, termination accessories, clamps, supports, jointing materials wherever required, and necessary end terminations, complete in all respects as directed by the Engineer-in-Charge.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 34,05,600 | |
| — | 700.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of 1.1 kV grade, XLPE- insulated, PVC/PE-sheathed, aluminium conductor, armoured power cable of size 95 sq. mm, 4-core, conforming to relevant IS standards, including laying in trench/pipe/duct as required, cable dressing, proper routing and identification, suitable cable glands, aluminium cable lugs compatible with the connected terminals, termination accessories, clamps, supports, jointing materials wherever required, necessary end terminations, insulation resistance testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 15,77,800 | |
| — | 800.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of 1.1 kV grade, XLPE- insulated, PVC/PE-sheathed, aluminium conductor, armoured power cable of size 70 sq. mm, 4-core, conforming to relevant IS standards, including laying in trench/pipe/duct as required, cable dressing, proper routing and identification, suitable cable glands, aluminium cable lugs compatible with the connected terminals, termination accessories, clamps, supports, jointing materials wherever required, necessary end terminations, insulation resistance testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 14,55,200 | |
| — | 1400.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of 1.1 kV grade, XLPE- insulated, PVC/PE-sheathed, aluminium conductor, armoured power cable of size 25 sq. mm, 4-core, conforming to relevant IS standards, including laying in trench/pipe/duct as required, cable dressing, proper routing and identification, suitable cable glands, aluminium cable lugs compatible with the connected terminals, termination accessories, clamps, supports, jointing materials wherever required, necessary end terminations, insulation resistance testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 10,99,000 | |
| — | 1200.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of 1.1 kV grade, XLPE- insulated, PVC/PE-sheathed, aluminium conductor, armoured power cable of size 16 sq. mm, 4-core, conforming to relevant IS standards, including laying in trench/pipe/duct as required, cable dressing, proper routing and identification, suitable cable glands, aluminium cable lugs compatible with the connected terminals, termination accessories, clamps, supports, jointing materials wherever required, necessary end terminations, insulation resistance testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 7,29,600 | |
| — | 800.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of 1.1 kV grade, XLPE- insulated, PVC/PE-sheathed, aluminium conductor, armoured power cable of size 16 sq. mm, 2-core, conforming to relevant IS standards, including laying in trench/pipe/duct as required, cable dressing, proper routing and identification, suitable cable glands, aluminium cable lugs compatible with the connected terminals, termination accessories, clamps, supports, jointing materials wherever required, necessary end terminations, insulation resistance testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 3,72,800 | |
| — | 40.00 | — | — | ||
| Supply, installation, testing and commissioning of outdoor cable junction box of 200 A capacity, suitable for 4-core LT armoured cable connections, complete with suitably rated aluminium busbar, insulated supports, cable entry arrangement, suitable glands and lugs, enclosure of outdoor/weatherproof construction with suitable IP protection, mounting arrangement, cover, hardware and all necessary accessories, complete in all respects. | — | — | — | 3,57,560 | |
| — | 50.00 | — | — | ||
| Supply, installation, testing and commissioning of 100 A, 4-way busbar chamber/junction box, complete with suitably rated copper busbar, insulated supports, incoming/outgoing cable termination arrangement, cable glands/lugs, suitable enclosure, cover, mounting hardware and all necessary accessories, complete in all respects. | — | — | — | 6,38,500 | |
| — | 7000.00 | — | — | ||
| Supply, erection, testing and commissioning of 6 sq. mm PVC insulated FR-LSH single-core copper cable, suitable for internal wiring/connection of lighting installation, of required voltage grade, complete with necessary cable laying/dressing, ferrules, lugs, termination, saddles/clamps and all accessories required for a complete installation. | — | — | — | 14,05,950 | |
| — | 6990.00 | — | — | ||
| Supply and laying of 32 mm dia PVC conduit/pipe of medium mechanical stress grade, suitable for protection/routing of electrical cables, including necessary bends, sockets, couplers, saddles/clamps, supports, junctions and other accessories, laid concealed/surface/underground as required, complete in all respects. | — | — | — | 3,93,187.5 | |
| — | 180.00 | — | — | ||
| Construction of RCC cable trench drain of internal/overall dimensions as approximately 0.45 m depth and 0.30 m width, with 0.08 m thick RCC base and side walls and 0.30 m wide, 0.08 m thick RCC top cover slab, using cement concrete of proportion 1:2:4 (1 cement : 2 coarse sand, Zone-III : 4 graded stone aggregate of 20 mm nominal size), including excavation, preparation of foundation, centring and shuttering, mixing, placing, compacting, curing, finishing, disposal of surplus earth and all necessary labour, materials and incidental works, complete as directed by the Engineer-in-Charge. The quantity shall be measured as per the approved dimensions and applicable measurement rules. | — | — | — | 33,97,680 | |
| — | 70.00 | — | — | ||
| Dismantling of existing/old LT overhead electrical lines and poles, including dismantling of existing LT conductors/cables, insulators, cross-arms, stays, clamps, brackets, service connections and other associated line materials, along with dismantling/removal of existing poles from the ground, carefully lowering the dismantled materials without causing damage, cutting/removing foundations wherever required, stacking and transporting the dismantled serviceable materials to the designated location and handing over the same to SSE Incharge, as applicable, with disposal of unserviceable materials as per extant Railway rules, including labour, tools, tackles, transportation and all incidental works, complete in all respects. | — | — | — | 2,36,460 | |
| — | 200.00 | — | — | ||
| Boring of approximately 2.6 m length underneath road/Railway track and laying of 150 mm diameter HDPE pipe, PN-8, for protection and passage of underground electrical cables, including supply of HDPE pipe, boring equipment, excavation of necessary entry and exit pits, pipe insertion, alignment, jointing, backfilling and reinstatement of disturbed surfaces, wherever required, complete with all labour, tools, tackles and accessories, as directed by the Engineer-in- Charge. | — | — | — | 7,12,000 | |
| — | 2.00 | — | — | ||
| "Supply, fitting, Fixing of 4 Way SMDB 400(Double Door) with Provision of 4 Pole MCCB As Out Going With the Following: (i) SMDB Main Enclosure(Double Door) 4 Way for 400A MCCB 4P as incomer and 4 P MCCB as Outgoing. (ii) SMDB Bottom Cable Unit Double Door - 1 No (iii) SMDB Cable alley Unit 400 double Door - way 2 Nos (iv) Metering Unit(for DD SMDB's with only)- with Ammeter,Voltmeter & Phase Indicators(3nos.) (v) SM DB Corner Unit For Double Door - 4 Nos (vi) MCCB, 400 A, 4P, 36KA BC- 1 No(vii) MCCB, 200 A, 4P, 25KA BC- 1 No(viii) MCCB, 125 A, 4P, 25KA BC- 2 No (ix) MCCB, 100 A, 4P, 25 KA BC- 1No." | — | — | — | 4,87,924 | |
| — | 150.00 | — | — | ||
| Supply, installation, testing and commissioning of dual-faced LED illuminated signage board of size 24" x 18", suitable for operation on 230 V AC supply, complete with weatherproof/corrosion-resistant frame, LED modules, suitable SMPS/LED driver, signage panel with required lettering/graphics, internal wiring and necessary accessories. The item shall include suitable mounting brackets, clamps, supports, fasteners and hanging arrangement wherever feasible, along with necessary electrical connections, flexible conduit, cable glands, lugs, ferrules and minor accessories. The signage shall be suitable for outdoor use, properly secured and earthed wherever applicable, including all materials, labour, transportation, erection, testing and commissioning, complete in all respects. | — | — | — | 1,58,400 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentTSK969.pdf
ATTACHMENT
GCCAPRIL2022WITHALLACS.pdf
ATTACHMENT
AnnexuresSectionVII.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .