Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 CrAccepted-AOC | ₹28.6 Cr | L1 | Accepted-AOC Being Lowest Bidder |
| 2 | L2₹28.9 CrRejected-Finance STREET NO 11 SECTOR NO 04 TILAK NAGAR SAGAR ROAD BIKANER RAJASTHAN 334001 | BIKANER | RAJASTHAN | 334001 | ₹28.9 Cr | L2 | Rejected-Finance Being higher bidder |
| 3 | L3₹29.8 CrRejected-Finance 35 B BHERU VILLAS SARDAR CLUB SCHEME AIR FORCE JODHPUR 342 011 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342011 | ₹29.8 Cr | L3 | Rejected-Finance Being higher bidder |
| 4 | L4₹29.8 CrRejected-Finance | ₹29.8 Cr | L4 | Rejected-Finance Being higher bidder |
| 5 | L5₹30.8 CrRejected-Finance | ₹30.8 Cr | L5 | Rejected-Finance Being higher bidder |
Tender Value
₹37.2 Cr
EMD Value
₹15 L
Closing Date
19 Dec 2019, 6:00 pmClosed
HQ CEJZ JODHPUR
HQ CHEIF ENGINNER JODHPUR ZONE JODHPUR
PROVISION OF OTM ACCN AT JAISALMER (JOB NO. S/2958)
2019_MES_288084_1
800458/E8
Open Tender
Civil Works
912 days
JAISALMER
AS PER NOTICE OF TENDER
10 documents required · 10 mandatory
₹3,000
GE (A)(P) NO 2 JAISALMER
₹15 L
Yes
HQ CEJZ JODHPUR
10 Jan 2020
9 Oct 2019
20 Dec 2019
9 Oct 2019
19 Dec 2019
9 Dec 2019
18 Oct 2019
Amount
Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 30(R)
Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 32(R)
Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 34(R)
Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 38(R)
Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT & HARD STANDING" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 40(R)
Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42
Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 43
Lump sum price worked out by the contractor for "FENCING, COMPOUND WALL AND GATE" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 46(R)
Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 48(R)
Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 52
Lump sum price worked out by the contractor for "SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 53
Lump sum price worked out by the contractor for "LIGHTING PROTECTION" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 54
Lump sum price worked out by the contractor for "RAIN WATER HARVESTING" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 55(R)
Lump sum price worked out by the contractor for "ARBORICULTURE" as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 56
Sch 'A' PART-XV (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.
INTERNAL ELECTRIFICATION S&F decorative box type LED tube light fitting 1x20 watt 1200 MM, CRCA Housing, including Detachable type LED Tubular Lamp / Rod with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: Crompton: Cat part No - LGT8-20-865-2 for LED tube and DMLN1LT8-16 for LED batten or equivalent as per Appx 'C'.
S&F box type LED flame proof tube light fitting 1x16/20 watt including LED tubular lamp with IP65 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: cat part no- EXTN1LT8-20 of crompton or equivalent as per Appx 'C'.
S&F decorative LED mirror light fitting 1x7 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: cat part no- LCL-07-CDL of Crompton or equivalent as per Appx 'C'.
M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 volt grade (FRLS) electric cable with multi stranded copper conductor of size 1.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia concealed type including all flame proof conduit fittings and accessories such as tees junction boxes, bends duly tested by CMRI Dhanbad suitable for one light/fan point controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire PVC insulated unsheathed 1100v grade FRLS cable with stranded copper conductor of size 1.5 Sqmm and connected to earth dolly complete all as specified and directed.
M&L for flame proof/weather proof direct entry type rotary switch single ON and OFF rotary motion switch in cast All alloy LM-6 enclosure epoxy powder coated single 230 volt, 10 Amps, AC ON/OFF switch operated externally by knob having 2 Nos of M20 cable entries earthing terminal suitable for mounting on wall/steel structure etc dully tested and certified by CMRI Dhanbad complete all as specified and directed.
S&F decoeative box type LED tube light fitting 1 x 8/9 watt including LED lamp, inbuilt driver etc complete with all accessories internally prewired inclding connecting up with twin core twisted flexible copper conductor of 1.0 sqmm size complete all as specified and directed. Make: Havells, LHEXBLP7IN1W009 or equivalent as per Appx 'C'.
S&F heavy duty, exhaust fans of 250 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. Make: VENTILUS of Crompton or equivalent as per Appx 'C'.
S&F heavy duty, exhaust fans of 300 mm sweep 1400 rpm ISI Marked suitable for SP 230/250 v 50 Hz AC supply complete including louver shutter fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. Make: EXHD-300-4-1 of Crompton or equivalent as per Appx 'C'.
S&F 12 watt LED porch light all as specified and directed. Make: LCDSPLN-R-12-CDL of Crompton or equivalent as per Appx 'C'.
S&F ceiling fans 1200 MM sweep Size, BEE Energy efficient 5 star rated Powered With Activ BLDC Technology, confirming to latest BIS Licensing and IS Specifications, Which consumes Less then 50% of the power as compared to conventional type Fans, Power Consumption 32 to 35 Watts, RPM 370 +- 25%, Service Value >= 6.0, Air Delivery in CMM = 220, down rods, All including connection with single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan complete all as specified and directed. Make: Crompton: Energion HS or equivalent as per Appx 'C'.
S&F Fire Proof ceiling fans 1200 mm sweep incl down rods and connecting up with 3 runs of 1.5 sq mm, single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan complete all as specified and directed. Cat No: CF/193 of M/S Sudhir or equivalent as per Appx 'C'.
S&F Air circulator 450 mm sweep wall mounted single phase 240 V complete all as specified and directed. Cat No: ACVORTEX18WM of Crompton or equivalent as per Appx 'C'.
S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 10 KV surge protection fitted ,CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistaranded copper conductor sheathed cable of size 1.0 SQMM fixed with & copper conductor sheathed cable of size 1.0 SQMM fixed with & including bracket made of GI Pipe 40mm bore light grade , 1.5 Mtr long bent to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed.
Note for item No 28.00 : (1) The LED lights shall have gurantee for 5 Years from date of completion of contaract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.Cat No. LSTS-30-CDL of Crompton or equivelent as per make listed in Appx 'C'.
S&F MCCB Distribution board, concealed flush to wall for mounting MCCBs and MCBs , factory made, fabricated out of CRCA sheet not less than 1.20mm thick fitted with DIN channel , neutral link ,DBs shall be semi glossy finished with epoxy polester based poeder paint process to ensure smooth finish and protection against corrosion atmosphere, the DBs shall be double door type with hinged door with locking arrangement. the DBs shall be of same make as MCCBs, DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all ways specified . the DBs shall be IP 43 protection class for the following:
MCCB DB suitable for 125 Amp TPN 4 way
MCCB DB suitable for 125 Amp TPN 6 way
MCCB DB suitable for 125 Amp TPN 8 way
S&F of MCBs/MCCBs, of following capacity, IS-8828 marked of the undermentioned type and rating and fixing in DBs (DBs catered separately in this Schedule)
SP MCB 6 to 32 Amp 10 KA rupturing capacity
SPN MCB 32/40 Amp 10 KA rupturing capacity
TPN MCB 32/40 Amp 16 KA rupturing capacity
TPN MCB 63 Amp 16 KA rupturing capacity
FP MCCB 100 Amp 25 KA rupturing capacity
M&L for Sub main wiring with Two runs of 4.0 Sqmm size main cable and one run of 4.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specefied & directed.
M&L for Sub main wiring with Two runs of 6.0 Sqmm size main cable and one run of 6.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specefied.
M&L for Sub main wiring with Four runs of 10.0 Sqmm size main cable and Two run of 10.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specefied.
S&F non metalic PVC conduit of size 25 mm exclusive of boxes but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc (for data cabling/TV point/telephone point connection and communication lines) complete all as specified and directed.
S&F T.V./Telephone Socket Outlet, including M.S. Box of size 100mm x 100mm x 65 mm with cover plate complete all as specified and directed.
M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically (in earth pit not less than 2.25 metre deep below ground level) with the top edge of earth plate at a depth not less than 1.5 metre below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI earth wire 4 mm dia bolted (with GI nuts, bolts & check nuts) and rivetted to earth (Plate) electrode at one end and connected to main switch board / DB at the other, earth wire protected by and including GI pipe 15 mm dia (medium grade) from top of electrode to main switch board and also including watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, with 8 mm dia TMT steel bars @ 100 mm c/c both ways, funnel, wire mesh including necessary excavation & earth work, etc as shown on electrical plate No 3 of SSR Part I.
ROAD, PATH & CULVERT M&L for WMM, 100 mm thick (compacted thickness) in single layer conforming to the grading given in Table 400-13 & physical requirement given in Table 400-12 spread with mechanical means & rolled by using 8-10 ton vibratory power roller over compacted sub grade surface as specified in clause 406.3.5 of MORT&H specification complete all as specified & directed.
M&L for marking 2.00 mm thick centre line dashes, arrows,brackets & similar work on road surface as par IRC pattern with thermoplastic Paint of approved make & mix with 8% mica applying with special applicator machine complete and making trafic diversion arrangements complete all as specified & directed.
S&F cat eye two way reflective of size 100mm x 100mm x 18.5 mm with aluminium body with reflective panels Amber/ Red/ white complete all as specified & directed. Make:- Simens/ Darkeye/ Solar/ Road star/ Alfa Gold or equivalent as per Appx 'C'.
S&F delineator made out of 65 mm internal dia MS circular hollow pipe of 750 mm long medium weight ends covered with 150 mm x 150 mm x 3 mm thick and top end covered with 100 x 100 x 10 mm thick mild steel plain sheet top portion covered with white and coloured high intensity prismatic grade retro reflective sheeting in 50 mm wide strips each colour (150 mm width) reflective band shall be white and Yellow complete all as specified & directed.
SEWAGE DISPOSAL M&L for on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, conconnection etc. complete With UPFLOW FILTER INLCUDING MEDIA for 10 users complete all as specified & directed.
M&L for Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc. complete for 50 users all as per drawing NO. CEJZ/TD/30 Sheet 1/3 to 3/3.
Ditto all as per item No. 42.00 here in before but of 150 users complete.
M&L for construction of soakage wells excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80 m dia x 3.00 m effective depth all as per drawing No. CEJZ/TD/29 sheet 1/3 to 3/3.
Ditto all as per item No. 44.00 here in before but of size 2.40 m dia x 3.00 m effective depth complete.
Ditto all as per item No. 44.00 here in before but of size 3.0 m dia x 4.50 m effective depth complete.
EXTERNAL WATER SUPPLY Supply & laying for centrifugally cast (spun) ductile iron pressure pipe of 150 mm bore with socket & spigot ends including specials having ISI stamping marking with IS 8329/2000, classification K7 in standard length of 5.50/6.0 mtrs, suitable for and including push on joint (gasket 'D' jointing) with cement mortar lining complete all as specified & directed.
Ditto all as per item No. 47.00 here in before but of 100 mm bore complete.
Cutting into 350 mm dia cast iron pipes and reducing to required length for making branch connection of 150 mm bore with suitable size of CI specials and lead joints. Note :- Lead joints measured and paid seprately.
M&L for run lead joints for 350 mm bore Cast iron spigot and socketed pipes complete all as specified and directed
Supply, installation, connecting and testing sluice valve,non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.0 with flanged ends drilled suitable for bore of pipe 150 mm ISI marked (IS:14846:2000) having S.S spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed.
Ditto all as per item No. 51.00 here in before but of 100 mm bore complete.
Ditto all as per item No. 51.00 here in before but of 80 mm bore complete.
M&L for construction of stone masonry valve pit chamber of size 900mm x 900mm x 900 mm type 'A' complete with MS cover of 3 mm thick sheet and angle iron frame 40x40x6mm size with locking arrangement including necessary excavation and earth work in any type of soil, PCC in foundation, plastering and two coats of anti corrosive paint over one coat of primer all as specified , shown in drawing No.CEBZ/TD/43/2011 sheet 1/1 and as directed.
Ditto all as per item No. 54.00 here in before but of size 900mm x 900mm x 600 mm type 'B' complete.
Ditto all as per item No. 54.00 here in before but of size 450mm x 450mm x 600 mm type 'C' complete.
S&F Foot Valve conforming to IS 4038 of 100 mm dia complete all as specified & directed.
Supply, install, test and commissioning of manufacturer's factory assembled and tested electric driven Monoblock pump set of capable of delivering 15 LPS at 22 mtr head comprising of horizontal split casing pump single/multi stage CI body with CI impellers coupled through a flexible coupling to a electric driven 3 phase motor 415 V not less than 7.5 HP complete mounted on common MS base frame and foundations as per manufacturer design for the pump sets including PCC foundations, MS bolts with nuts including priming arrengment of pump set by providing GI pipe 20 mm bore, medium grade, gate valve 20 mm with fittings, PVC tank 500 Ltrs capacity etc complete in all respect all as specified and directed. Make:- Kriloskar Brother, Model No. KDS 822++ or Equivalent make as per Appx 'C'.
Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete as specified & directed.
M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as specified and directed. Note:- For the purpose of payment only punned thickness will be measured.
a) Copper bus bar capacity 200 Amps for Phase-R-Y-B-3 Nos & neutral - 1 No b) MCCB FP 25 KA 63 Amps - 1 No (I/C) c) MCB TPN 10 KA 32 Amps - 3 Nos d) S&F star delta starter 3 phase 415 V 50 Hz, suitable for Mono Block Pump of 7.5 HP complete with under voltage and overload protection- 2 Nos and Single phase preventer - 02 Nos
EXTERNAL ELECTRIFICATION Supply, installation, testing and commissioning including transportation at site trasformer step down outdoor type copper wound of capacity 315 KVA, 11 KV on HT side and 433 volts on LT side at no load, 3phase 4 wire 50 Hz AC supply oil immerssed, naturally cooled with external cooling tubes delta connected on HT side and star connected on LT side, corresponding to vector group DY-II with neutral brought out separately for earthing off load tap changing arrangements on HT side to vary secondary voltage (+) or (-)7.5% in steps of (+) or (-) 2.5%, oil filled conforming to IS-1180 (Part-1) 2004 complete on platform as per manufacturer recommendations complete with standard fittings conforming to IS-1180 energy efficient and with ECBC Closset or latest IS complete all as specified and as directed. Note:- The quotaed rate shall deemed to be include the cost of platform & foundation as recommended by manufacturer.
M&L for earthing complete with galvanized steel earth electrode 60 cm x 60 cm x 6mm buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with the top edge not less than 1.5 mtr below ground level connected to galvanized iron strip 32x6 mm by means of bolts, nuts, chock nuts and washers and other end connected to earthing test point including funnel, watering pipe of 20 mm bore (Light grade) GI pipe wire mesh, charcoal or coke and common salt in alternate layers all around the earth electrode compacted thickness 15 cm, earthing pit in PCC (1:3:6) type C1, 50 mm thick pre cast RCC cover slab (1:2:4) type B1 set in CM (1:4), reinforced with 8 mm dia TMT bars @ 10 cm c/c both ways and suitable handle of 10 mm dia MS round bars including earth work in excavation in soft/loose soil, desposal of soil not exc. 50 meter complete and testing on completion all as shown in electrical plate No-3 of MES schedule, part-I complete all as specified and directed.
NOTE FOR ITEM NO. 63.00:- (i) Item includes the cost of 7.5 m GI pipe 40 mm bore medium grade for protection of GI strip (ii) Item includes the cost of 7.5 m of GI strip (iii) PCC pit shall be provided at least 0.5 mtr away from earth pit and not on the earth pit itself and the extra cost of additional length of watering pipe bends, elbow etc shall be deemed included in the unit rate quoted.
Supplying, install and errect in true vertical position steel tubular swaged welded pole, 11.00 mtr long, conforming to IS-2713 part-II, type 410 SP-55, complete with MS base plate 6mm thick and of size 300x300mm, finial taper, pole cap, bolts, nuts, washers & screws etc. pole made out of ERW M.S tubing including of holes required Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting five signal black and white colour bands alternatively from lower portion of exposed pole starting from plinth block, each band of 300mm height at 300mm spacing, painting pole number, letters/figures by black paint complete all as specified and directed.
Ditto all as per item No. 64.00 here in before but of type 410, SP-31 9.00 mtr long complete.
S&F integrated LED street light luminaire comprising of epoxy powder coated housing enclosed with glass cover in frame of capacity 36 watt mounted on MCPCB, LED Efficacy of 110LM/W including electrical connection with copper wire PVC insulated and PVC sheathed 1.5 sq mm single core from juction box to street light fitting complete all as specified and as directed. Make: Crompton Cat part No. LSTS-36-CDL-M or Equivalent make as per Appx 'C'.
S&F of Hot Press Moulded SMC (Sheet Moulding Compound) Junction Box of inside dimension 250 mm x 200 mm x 105 mm including four Nos Aluminium Stud / terminal of suitable size and one Nos MCB SP 06 Amps and fixed on pole with clamps, bolts & nuts complete with two coat of synethictic enamel paint/ powder coated complete all as specified and directed.
S&F decorative post top latern LED fitting for 360° indirect light of 40 Watt resistant to impact and corrosion, glare free and better uniformity IP-65 protection/M- Milky version with surge protection , LED driver complete all as specified and directed by the Engineer-in-Charge. Make : Cormpton Cat Part No. LPTO-40-CDL/M or equivalent as per Appx 'C'.
Supply ,fixing, Lithium based Engery Efficient Integrated Solar Street light 20 Watt in Aluminium Die Cast/Extrusion Type body encases Solar PV Panel > 50Wp Mono crystalline, Lithium Battery 11.1/12.8V, 23.4 AH with inbuilt BMS, High brightness LED, CRI 80, Color Temperature 6500K, Microcontroller based charge controller cum driver with automatic dimming function, Dusk to Down operation, , working temperature - 10C to 55C with adjustable MS clamp suitable for pole/wall mounting. Protections Short Circuit, overload, Reverse polarity and battery protections. MODEL - Crompton CSADSPI20CDL or equivalent as per Appx 'C'. including 5.6 metre long pole of medium grade GI pipe of size 50 mm dia and errection including PCC(1:3:6) type C-2 as per manufacturer recommendations, including GI bracket of suitable size, make to shape for fixing solar street light with flat iron clamp nut,bolts & washers etc complete all as specified and directed.
M&L for FRP (Fibre Re-inforced Plastic) fencing of FRP pultruded section / pickets, FRP rods of 12 mm dia fitted to pickets vertically and pickets fitted to sub frame horizontally around the transformer , size of fencing 10.0 x 5.0 mtr with locking arrangement. The FRP fence will be fixed to vertical post made out of FRP pultruded hollow section at a distance between 2.0 mtr & upto height 1.5 mtr from GL. The vertical post embed to PCC 1:3:6 type C2 of size 0.45 x 0.45 x0.45 mtr on post holes complete all as specified and directed.
Supply & fix sintex box of size 250mm x 200mm x 105 mm hinged with MCB TPN 32 Amps for looping of cable for 3 phase and 1 neutral fixed on pole with MS clamps- 02 Nos of size 40 mm x4 mm, bolts & nuts complete with 1 nos MCB SP 6 Amp capacity mounted on din rail inside box (for loopng circuit of street lights) complete all as specified and directed. Make:Sintex, Cat No. GS-JB-2520 or equivalent as per Appx 'C'.
(a) Copper bus bar capacity 900 Amps for Phase-R-Y-B- & neutral. (b) MCCB FP 630 Amps 50 KA- 01 No (I/C) (c) 4P MCCB 160 A 35 KA- 01 No (d) 4P MCCB 125 A 35 KA-03 Nos (e) 4P MCCB 100 A 35 KA- 1 No. (f) 4P MCCB 20 A 15 KA - 01 No. (g) Supply & fixing automatic street light switch of rating 5 KW in Three phase using nature switch-03 for automatic swithing "ON/OFF" of street lighting based on lux level of natural light along with contactor rating 3 phase 25 Amp two pole & 25 Amp single pole , MCB 25 Amps single pole (3 Nos) with support terminals prewired with PVC insulated strand copper wire enlosed/housed in pole wall mounted enclosure made of rust proof , shock proof , termite proof & dust proof FR grade specill moulded compound Junction Box complete all as specified. Model - SWADEEP - 02EC5kw3P : 01 No
(a) Copper bus bar capacity 200 Amps for Phase-R-Y-B- & neutral (b) 4P MCCB 125 A 35 KA - 01 No (I/C) (c) 4P MCCB 100 A 25 KA - 01 No (d) 4P MCCB 32 A 15 KA - 01 No (e) 4P MCCB 16 A 15 KA - 03 Nos (f) SPN MCB 10 A 10 KA - 02 Nos
Ditto all as item No- 73.00 here in before but consisting of followings:- (FP-2)
(a) Copper bus bar capacity 200 Amps for Phase-R-Y-B- & neutral (b) 4P MCCB 125 A 35 KA I/C - 01 No (c) 4P MCCB 50 A 25 KA - 02 Nos (d) 4P MCCB 16 A 15 KA - 02 Nos (e) 4P MCCB 20 A 15 KA - 01 No (f) SPN MCB 10 A 10 KA- 05 Nos
Ditto all as item No- 73.00 here in before but consisting of followings:- (FP-3)
(a) Copper bus bar capacity 150 Amps for Phase-R-Y-B- & neutral (b) 4P MCCB 100 A 35 KA I/C - 01 No (c) 4P MCCB 20 A 15 KA - 02 Nos (d) 4P MCCB 16 A 15 KA - 04 Nos (e) SPN MCB 10 A 10 KA - 09 Nos
Ditto all as item No- 73.00 here in before but consisting of followings:- (FP-4)
(a) Copper bus bar capacity 200 Amps for Phase-R-Y-B- & neutral (b) 4P MCCB 125 A 35 KA I/C - 01 No (c) 4P MCCB 80 A 25 KA - 01 No (d) 4P MCCB 25 A 15 KA - 01 No (e) 4P MCCB 16 A 15 KA - 04 Nos (f) SPN MCB 10 A 10 KA - 05 Nos
Ditto all as item No- 73.00 here in before but consisting of followings:- (FP-5)
(a) Copper bus bar capacity 300 Amps for Phase-R-Y-B- & neutral (b) 4P MCCB 160 A 35 KA I/C - 01 No (c) 4P MCCB 50 A 25 KA - 02 Nos (d) 4P MCCB 32 A 15 KA - 04 Nos (e) 4P MCCB 16 A 15 KA - 05 Nos (f) SPN MCB 10 A - 02 Nos
SUMMER APPLIANCES Supply, installation and testing of refrigerator not less than 195 Litre capacity, 230 V, 50 HZ, 5 star rating, frost free, double door with humidity control and deoderizer, toughned glass shelves, stabilizer free operation, inverter technology compressor, rust resistance body, dual thermostart for refrigerator & freezer, with cool pack, complete all as specified & directed.
Ditto all as per item No. 78.00 here in before but of capacity not less than 286 Litre complete.
Ditto all as per item No. 78.00 here in before but of capacity not less than 310 Litre complete.
Supply, installation and testing of hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and anti dust / catalyst filter for better indoor air quality with minimum 3 star rating of capacity 1.5 TR complete all as specified and as directed.
Ditto all as per item No. 81.00 here in before but of capacity 2.0 TR complete.
S&F voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified and as directed.
Ditto all as per item No. 83.00 here in before but of capacity 4 KVA, 12 A suitable for 1.5 TR split AC complete.
Ditto all as per item No. 83.00 here In before but of capacity 5 KVA, 15 A suitable for 2 TR split AC complete.
Supply, installation and testing of desert cooler electric driven (single phase) three speed having nominal air flow capacity 4000 Cu M per hour with propeller ISI marked cooler fan motor copper winding single phase fitted with & having 3/4 Nos blade, submersible pump, Cooler body made out from 20 gauge mild steel galvanized iron sheet & water tank made out of 18 SWG having capacity 40 Ltr minimum including three louvers with wood wool pad, flexible PVC distribution pipes and 3 way junction including cooler stand all as per TD drawing, all as directed.
SOLAR WATER HEATER Supply, installation, testing and commissioning of Solar Water Heating System indirect type with heat exchange provision of capacity 200 litre with electric backup heater of 3KW capacity per day at temprature 60 degree centigrade to 80 degree centigrade as per manufacturer's design suitable flat plate collectors having insulation of rock wool/mineral wool 50mm thickness at bottom and 25mm thickness on sides with toughened/tempered glass of 4mm thick and cladding with aluminium sheet 26 SWG, Insulated stainless steel Hot water storage tank non pressure capacity as per manufacturer's design of suitable gauge thick stainless steel plate ( having insulation of rock wool/mineral wool 100 mm thick and cladding with alum sheet 24 SWG).
ITEM NO. 87.00 (Cont...):- Provisions of electrical back up with minimum 3 KW heating element including providing one No 25 Amps MCB 10 KA rupturing capacity in sub-main wiring with 4 Sqmm single core in PVC conduit tapped from main board , Heat exchanger shall be cage type and made of stainless steel tube, and Rotational moulded polyethylene Cold water storage tank (cylindrical vertical with closed top) double layer wall construction hoisted and fixed in position of same capacity with ball valve of suitable size with stands for collectors, staging of suitable height (for easy flow of water) for hot water and cold water tanks made out of 50x50x6mm angle iron with PCC (1:2:4) as required complete with temprature gauge 0 to 100 degree centigrade, brass gate valve in hot and cold water pipes, horizontal type strainer on incoming water line, complete all as specified and directed.
Supply & install 25 Litres capacity Geyser (water heater) storage type 5 star rating with necessary holes in walls with drilling machine and grouting foundation nuts and bolts in wall and doing necessary connecting work and making all electrical connections complete all as specified and as directed .
S&F galvanised iron pipe medium grade 20 mm bore ISI marked with necessary fittings such as tees, elbows, bends, reducers, union etc fixed along wall/floor/roof including covering with insulation all around with 25mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 KG/Cum conforming to IS 9842 as directed of rock wool/mineral wool, chicken mesh and cladding with 26 SWG alum sheet incld chasing/cutting of wall as required complete all as specified and directed.
ARBORICULTURE Supply & plantation of CHAMPA CHAMELI with saplings of 1.2 to 1.5 mtr hight including excavation of suitable size pit (size of pit shall not less than 75 cm dia & 75-80 cm deep) to accomodate the roots of plants including provision of good earth by treating with farm yard manure in the ratio (4:1), fertilizers and pesticides (i.e Bevation and neem cake BHC 10% linson dust. Thimment or phorate,manures super and vermicompost) and making up the trench area to proper levels, for its growth and maintaining by regular watering and weeding etc and maintaining for one year from the certified date of completion of the work complete all as specified & directed.
Ditto all as per item No 90.00 here in before but NEEM.
Ditto all as per item No 90.00 here in before but SHISHAM.
Ditto all as per item No 90.00 here in before but GULMOHAR
NOTE FOR ITEM NO. 90.00 to 93.00 (i) Height of plant shall be measured from top of follage ( not from the isolated branch/leaf,main stem) to 150mm from top of root. (ii) Water will not be supplied by MES. Contractor has to make his own arrangement for watering to plants and grass. (iii) The rates quoted by the contractor deemed to include watering, maintenance of plants till 2 years after certified date of completion of work. (iv) During 2 years after completion if any plant is found dead, or not of satisfactory growth, plants of approved size and shape shall be provided without any extra cost to the state. Simillarly the grass shall also be replanted without any extra cost if no desired growth is achieved during the period of 1 year. (v) Supply and application of manure, sweet earth and pesticides, fertilizers, etc up to 2 years after completion are deemed to be included in the quoted unit rate. (vi) Tenderer to note that 20% cost of quotation against these items shall be retaied for 2 years after completion.In case of failure by the contractor to maintain the plants as above, the same shall be carried out by the department at his Risk and Cost and the expenditure shall be deducted from this retained amount. (vii) The plants shall be brought at site Six months before the date of completion of the work as per Work order.
PROVISIONAL LUMP SUM (PLS) Provide Provisional lump sum for (a) Construction of PARADE GROUND-1 No (b) Construction of FOOTBALL/HOCKEY GROUND-1 No (c) Construction of BASKET BALL GROUND-1 Nos (d) Construction of VOLLEY BALL GROUND- 1 Nos (e ) Construction of Steel gate 7.50 M wide complete- 2 Nos (f) Construction of Stone Masonry Water storage tank for Rain Water Harvesting complete- 5 Nos
NOTE FOR ITEM NO 94.00 : - 1) Provisional lump sum shall be expended wholly or in parts as directed by GE. The works under Provisional Lump Sum shall be measured and paid for at applicable rates in MES SSR 2010 Part-II subject to percentage ( + or - denomination) computed under last colummn of this schedule above/below the provisional lump sum price worked out by the MES. 2) For details refer relavent TD drawings.
FRIZO INDIA PVT LTD
RAGHUSONS INFRA ENGINEERING PVT. LTD
GANGA INFRABUILD PVT LTD
MANGLA AMIT BUILDERS PVT LTD
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid