Repair and Maintenance of Border Flood Lights BFL DG and Solar Power Plant installed along Indo Pakistan Border at BOPs in AOR of 58 BN BSF under SHQ BSF Gurdaspur SH Providing and making source of supply for illumination of BFLS poles during water

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.

Providing & laying in position cement concrete of 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level.

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Supplying and fixing of octagonal type, 10 Meter height designed as per ILE TR7 & BS5649 for structural design & as per IS875 (Part III), 1987 amended up to date, Bottom dia 175 mm & top dia 70 mm as per technical specifications or as per manifacturer specifications (design and drawing to be approved by Engg in Charge) capable to withstand the wind pressure 50-55KM/Hr octognal hot galvanised suitable for the configuration of LED fittings with base plate of 275x 275 x 16 mm welded at the bottem and hole dia 28x50 mm complete with M 24 mm 04 nos nut bolt systematically located for holding the pole and nuts and bolts washer for earthing and fixing of channeled shaped LED Flood Lighting Bracket (suitable for mounting of 3 Nos flood lighting luminair on existing octagonal pole with totally enclosed outdoor type front openable loop box with transparent hinged lid sealable, cable entry via metric knockouts suitable for 3.5 Core X 35 Sqmm PVC / XLPE UG CABLE including providing and fixing 3/4 phase 100 Amp bus bar capacity connector with nut bolt arrangment , one 32 A DP MCB and 03 Nos 6 Amp SP- MCB "C" series, drilling holes connections, interconnections, earthing including providing necessary water proof gasket to the box complete in existing loop Box etc as required on site. ( / Bajaj / Utkarsh/Cromptono equivalent make).(Material will be supplied at site of BOP)

Supply, Installation, testing and commissioning of Set of max 3 luminaires with combined wattage 150 W each on exising pole having minimum system effecacy of 90 Lumen / Watt outdoor type LED Flood Light Luminaire of IP 66 and above having suitable pressure die cast housing / heat sink, driver, optics for operation in 230 Volts A.C, PF not less than 0.90, CRI>70, internal & external surge protection, LM/79-80 Colour tempature 6000 K, suitable with beam angle to meet desired alluminium level as per required technical specifications & suitable for mounting on the existing pole bracket including drilling of holes, wiring the existing pole with 2.5 sqmm FRLS grade PVC insulated PVC insulated copper conductor single core cable from loop box to fitting i/c providing and fixing suitable size of GI flexible pipe with accessories from top slot of pole to fitting connections, interconnections etc as per specification complete as required. (Philips/ HPL/ Bajaj/ Havells/ Crompton make)

Repair and maintenance of existing HI-Intensity, multifunctional autorotateable 360 degree,LED search light 300 watt narrow beam-7 degree,LM6 housing with heat sink, round in shape with replacement of defective VFD etc. as required.

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.5 X 2.5 Sqmm