REPAIRS TO PATH, DRAINAGE, CULVERTS, HARD STANDING BOUNDRY WALL FENCING, DRAINS, FENCING AND CONNECTING ITEMS IN MD ACCN AREA UNDER AGE B/R-I UNDER GE KAMPTEE

Amount

M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including a layer of 40mm thick sand cushioning over and including 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) including demolition of PCC floor any thickness etc complete all as directed.

M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade etc over and including a layer of 40mm thick sand cushioning over and including 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) including demolition of PCC floor any thickness complete all as specified and directed complete all as directed.

M&L for rubber moulded chequered cement concrete tiles of size 30cm X 30cm X 20mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) over and including screed bed 15 mm thick in CM1:4 incl demolition of PCC complete all as specified and directed

M & L for Hardcore of gauge n exc. 63 mm Broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed .

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete incl demolition of brick work built in cement mortar all as specified

M&L for half brick thick brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 incl demoltion of brick work in cement mortar complete all as specified

M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified

M&L for preparation for new surfaces of wall applying two coat of cement base paint on wall over chalk whiting etc complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls incl demolition of reinforeced cement concrete of any description and in any position all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface all as specified

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching, bed plates and the similar including, weathering, slightly rounded or chamfered edges and throating complete all as specified and directed.

M&L for providing 40mm thick cement concrete 1:2:4 type B1 (using 20mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement incl demolition of cement concrete complete all as specified and directed

S&F 3mm thick and 38mm wide glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified

M&L for 15mm thick plaster in CM 1:4 on brick or concrete surface finished even and smooth without using extra cement over average 20 mm thick dubbing out on irregular face of brick or concrete surface in CM 1:4 incl taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparation old steel and iron surface not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not exc 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for Preparing Old/New painted surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Dismantling fencing wire mesh of any description complete all as specified and directed

Excavating in post holes (orsimilar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earthor broken rubble mixed withearth around, in layers notexceeding 25 cm , watering and removing surplus soil to a distance n-exc 50 m and making good surface in soft /loose soil complete all as specified and directed.

M&L for Cement concrete type D2 1:4:8 ( using 40 mm graded stone agg) as in foundations,filling and mass concrete complete all as specified and directed.

S&F of angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Supply of Chain link MS galvanisd fencing of size 50 mm x 50mm and 4 mm dia (4.30 kg /sqm) complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed.(Note chain link fencing , nut bolts and line wires shall be measured seperately under supply only )

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long butnot exc 10 cm long of 5 to 10 mm dia complete all as specified and directed.

S&F Mild steel round bars 10mm dia as in tie rod cut to length, bent to shape required, for fixing of chain link fencing complete all as specified and directed.

S&F in repair for galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed. (Each line wire to be measured).

Dismantling old structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,and applying two coats of aluminium paint over and including one coat of aluminium primer complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 20730.00]

Varsha G Nagphase (BID ID -3288843)

NORTH INDIA PEST CONTROL (BID ID -3288373)

VIJ ASSOCIATES (BID ID -3288763)

M/s Rahul Traders (BID ID -3288980)

M/s B S Jain (BID ID -3294471)

M/s Rana Construction (BID ID -3288690)

sunway associates (BID ID -3294480)

SHIV SHANKAR MISHRA (BID ID -3289087)