Construction of link road from Banikhet to village Kanda Harizan Basti Km. 0/0 to 2/300

Amount

Providing and laying Mechanically mixed and vibrated concrete for plain cement concrete nominal mix 1:3:6 ( one cement is to three sand is to six graded crushed stone aggregate 40 millimetre (forty millimetre nominal size on ground or under water and curing complete for 14 (fourteen) days, in open foundations for all type of structures including pumping or bailing out water (surface and sub soil water) dewatering for all depths and any quantum of water including removal of slush which may arise at the time of laying concrete complete for all heights / depths including the cost of form work complete as per drawings and M.O.R.D. technical specification section 800,900 and 1200 or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality ,Malkana, toll tax ,GST or any other taxes imposed by the Government.

Providing, spreading and compacting stone aggregate size 53 mm to 22.4 mm (fifty three millimetre to twenty two point four millimetre) Grading-III, 75 mm (seventy five millimetre) compacted thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty - hundred) KN static roller in stages proper graded and camber, applying and brooming stone screening typr "B" of size 11.2 mm (eleven point two milimetre) nominal size at the rate of 0.18 (zero point two three cubic metre) per ten square metre to fill up the interstices of course aggregate, watering and compating to the required density as per MORD technical specifications clause No. 405 by manuals means an including hauling of material within all leads and lifts and other incidentals. The rate including octori, royality, Malkana, toll tax, sale tax ,GST or other taxes imposed by the Government.

Providing and applying primer coat on prepared surface of granular base including cleaning of the road surface with Hydaulic brooms and spraying primer @ 0.85 Kg. (zero point eight five kilogram) per square metre SS-I emulsion using mechanical means as per drawing MORD technical specifications section 500 as per the entire statisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.275 kg (zero point two seven five killograme) per sqm on prepared dry and hungry bituminous surface/granular surface cleaned with Hydraulic broom as per MORD Technical Specification section 500 or as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate is including the octori, royality, Malkana, toll tax,GST, or other taxes imposed by the Government.

Providing, laying and rolling of 20 mm (twenty millimetre) thickness open-graded premix carpet by machanical means composed of 13.2 mm (thirteen point two millimetre) to 5.6 mm (five point six millimetre) aggregates either using penetration grade bitumen (VG-10) (viscosity grade ten) 14.60 kg (fourteen point sixty killogram) per ten square metre grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type B as per Technical Specification Clause 508 and as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government.

Providing and laying seal coat by mannual means sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510 using bitumen (VG-10) (viscosity grade ten) 6.80 kg (six point eighty killogram) per 10 (ten) square metre and as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government.

Gargesh Kumar

R R CONSTRUCTION

tilak raj Vakil