DCSEM/CQD/QSB/21-22/NIT/13 dated 01.06.2021

Amount

GENERAL ABSTRACT

Description of Work / Item(s)

Amount

Labour charges for checking, repairing, removing & refixing/ replacing existing old wooden and aluminium fittings & fixtures of doors, windows, glass facade, aluminium framework of facades, sliding shutters, fixed shutters, cup boards, ventilator and all other carpentry fittings etc. for trouble free operations & effective movement and PH & sanitary fittings & fixtures of EWC, flushing cistern, wash basin, water supply lines, bib cocks, pillar cocks, stop cocks, internal & external valves, showers, removal of chokages etc. on regular trips ( Inspection) and as & when required on emergency calls including necessary screws, gutties, cleats, rawl plugs, nails, white cement, hemp yarn, drilling in wall etc. required to refix in position old fittings/ fixtures after repairing/ rectifying the defects, cleaning the floor, carpets, walls including cost of tools & plants and the cost of removing the existing damaged/ non repairable/ non-functioning fittings and depositing the same in Department Stores and replacing the same with new aluminium/ brass/ PH fittings/ items (excluding cost of new materials like fittings/ fixtures) etc. complete all as directed by the Engineer- in- Charge.

Labour charges for following:

Labour charges for checking carpentry items including, repairing, removing & refixing/ replacing wooden, aluminium/ brass fittings & fixtures whenever and wherever required once in a week.

Labour charges for checking Public Health items including repairing, removing & refixing/ replacing PH fittings & fixtures whenever and wherever required once in a week.

Supplying of following items: All Carpentry, PH and sanitary items supplied under Item '1.2' below shall be fixed by contractor using the carpenters & plumbers visiting for routine checks of the guesthouse under item 1.1 above (or) on emergency visits. NO separate payment for fixing shall be made.

C.P. brass towel rail 600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete with brackets fixed to wooden cleats with C.P. brass screws and necessary fittings/ fixtures of approved quality and make etc. complete all as directed by the Engineer- in- Charge.

C.P. brass towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality, colour and make weighing not less than 90 grams all as directed by the Engineer- in- Charge.

Bevelled edge mirror of superior glass (of Modiguard or Saint gobain of approved quality & required size) complete with 6 mm thick hard board ground for fixing to wooden cleats with C.P. Brass screws and washers complete all as directed by the Engineer- in- Charge.

Door closer with new IS:3664 marked aluminium die-cast body tubular type universal hydraulic door closer make of M/s. Godrej with necessary accessories, screws etc. complete all as directed by the Engineer- in- Charge.

100 mm or 125 mm handle with new bright finished brass handle with screws etc. complete all as directed by the Engineer- in- Charge.

300mm x 16 mm x 5 mm Latch with new bright finished brass Door Latch with screws etc. complete all as directed by the Engineer- in- Charge.

Bright finished brass 100 mm mortice latch & lock with one dead bolt and a pair of lever handles with necessary screws etc. complete of approved make and quality as directed by the Engineer- in- Charge.

4 mm thick plain glass of MODI (or) equivalent make for aluminium windows & doors of required size including removing the broken glass carefully fixing new glass panes including cutting, wastage, transportation, taxes, profit, tools & plant etc. complete all as directed by the Engineer- in- Charge.

Double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315 marked with S.S. cover plate of Hardwyn make (model 3000) or approved equivalent, for doors as per specifications and as per the direction of Engineer- in- Charge.

Aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete (Twin rubber stopper) as per specifications & as directed by Engineer- in- Charge.

Supply & fixing of following items:Following carpentry fittings & fixtures of approved quality with necessary screws etc. complete all as per specifications & as directed by Engineer- in- Charge.

a) Aluminium tower bolt 200mm x 10 mm.

b) Aluminium tower bolt 150mm x 10 mm.

c) Aluminium handle 125 mm.

d) Aluminium Channel for curtain.

e) Plastic hooks and stopper for curtains.

f) EPDM rubber gasket as per existing design.

g) Aluminium openable window handle.

Supply & fixing approved heavy quality solid plastic seat and lid of black shade with C.P. brass pillar hinges conforming to relevant IS etc. complete all as per specifications and as directed by the Engineer- in- Charge.

a) For European water closet.

Supply & fixing heavy quality 450mm/600 mm long 15 mm dia. PVC inlet connection with brass unions at ends etc. complete all as per specifications and as directed by the Engineer- in- Charge.

Supply & fixing approved quality handle for low/ high level flushing cistern of approved make with or without rope etc. complete all as per specifications and as directed by the Engineer- in- Charge..

Supplying of following PH fittings and fixtures of approved make/ as existing quality with necessary screws/ fixtures etc. complete all as per specifications and as directed by the Engineer- in- Charge.

a) Syphon for PVC Flush tank.

b) Ball cock set for PVC Flush tank.

c) Rubber washer for PVC flush tank.

d) PVC liquid soap container.

e) Toilet paper holder.

Supplying of following PH fittings for Renovated room in Dhruva Guest House:-

a) Single lever Basin Mixer similar to Model No. 15011 of OPAL Series of M/s. Jaqua retc. complete all as per specifications and as directed by the Engineer- in- Charge.

b) Single lever wall Mixer with telephonic shower arrangement only similar to Model No. 15119 of OPAL Series of M/s. Jaquar etc. complete all as per specifications and as directed by the Engineer- in- Charge.

c) Two way Bib Cock with Hand faucet arrangement only, similar to Model No. 15041 of OPAL Series of M/s. Jaquar.

d) Angular stop cock with wall flange similar to Model No. 15053 of OPAL Series of M/s. Jaquar.etc. complete all as per specifications and as directed by the Engineer- in- Charge.

e) Over Head Shower with extension piece similar to Model No. 495 of M/s. Jaquar etc. complete all as per specifications and as directed by the Engineer- in- Charge.

f) Hand shower single flow with 1.5 mt flexible tube and wall bracket similar to Model No. 1737 of M/s. Jaquaretc. complete all as per specifications and as directed by the Engineer- in- Charge.

g) Towel Ring similar Model No. 35721 of M/s. Jaquar.

h) 600 mm long Towel rack with lower hanging arrangement similar to Model No 1181N of M/s. Jaquar.

i) Soap Dish similar to Model No. 35731 of M/s. Jaquar.

j) Health Faucet plastic Body with 1.0 mt long flexible tube and wall hook similar to Model No. 593 M/s. Jaquar.

k) Waste Coupling 32 mm size full threaded Model No. 705 of M/s. Jaquar.

l) Bottle trap Economy model 32 mm with 300 mm & 125 mm long wall connection pipes of Model No. 773B of M/s. Jaquar.

m) Toilet paper holder similar to Model No. 1151N of M/s. Jaquar.

Lacquer polishing of door shutters, frames & pelmets including preparation of surface, sand papering, applying and polishing the surface to the required finish, cleaning the surrounding area including cost of materials and labour etc. complete all as directed by the Engineer- in- Charge.

Repainting of old painted wall surfaces with on one coat of primer & two coats of acrylic emulsion paint of approved shade and make including preparing the surface by scrapping old surface, sand papering, filling with BIRLA putty on entire surface, scaffolding and cleaning the splashings & droppings from floors etc. covering the furniture with approved covering material like tarpaulin/ plastic sheets etc. consumption of paint shall be strictly maintained as per paint manufacturer specification all as directed by the Engineer-in-Charge.

Repainting of old painted wall surfaces with one coat of primer & two coats of Royal Luxury acrylic emulsion paint (on already prepared surface/ old similar painted surface) of approved shade of M/s. Asian Royale or M/s. Dulux Velvet etc. and make work including preparing the surface by scrapping, sand papering, filling with BIRLA putty on entire surface, scaffolding and cleaning the splashings & droppings from floors etc. covering the furniture with approved covering material like tarpaulin/ plastic sheets etc.consumption of paint shall be strictly maintained as per manufacturer specification all as directed by the Engineer- in- Charge.

Repainting of old painted wooden surfaces with two coats of synthetic enamel paint of approved quality and shade including preparing the surface by sand papering, filling the crevices with approved putty, scaffolding and cleaning the splashings & droppings from floors, walls etc. complete all as directed by the Engineer- in- Charge.

Cement plastering using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with neeru over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Concure of M/s fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification etc. and removing existing damaged/ worn out plastering and disposing off debris out side colony etc. complete all as per specifications and as directed by Engineer-in-charge.

a) 12 mm thick.

b) 15 mm thick.

M/S DEEPAK KUMAR CONTRACTOR

M/S DEEPAK KUMAR CONTRACTOR