Renovation of residential building of EE and AE at Sinchai Colony Basti

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 moutside the periphery of the area cleared.

Dismantling old plaster or skirting out raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead as per direction of Engineer - in- charge.

Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. each 134.10

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor

12 mm thick cement plastering in 1:4 cement & coarse sand mortar with cost of all materials, scaffolding, labour and T&P etc.

Finishing walls with water proofing cement paint of required shade New work (two or more coats applied @ 3.84kg/10sqm) as per DSR/

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.11 Second class teak wood

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 850 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S§.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 26.87.2 35 mm thick

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 Itr/10 sqm over an under coat of primer applied @0.75 Itr/10 sqm of approved brand and manufacture

S/F Mosquito proof jali with sheesham wood batten around the jali , including the cost of jali , bottom , nails , screws etc required for proper completion of work.

Wiring for twin control light with point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit 2 way piano type switch , phenolic laminated sheet , suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch , modular plate , suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc .as required. 1.3.3 Group c

Wiring for light / power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface in surface / recessed steel condute alongwith 1 no. 4sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch , modular plate , suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc .as required. 1.3.3 Group c

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch , modular plate , suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc .as required. 1.3.3 Group c

Wiring for light / power plug with 4x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface in surface / recessed steel condute alongwith 2 no. 4sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed conduit as required. 2x1.5sq.mm + 1x1.5sq.mmearth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed conduit as required. 2x2.5sq.mm + 1x2.5sq.mmearth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed conduit as required. 2x4sq.mm + 1x4sq.mmearth wire

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including etc. as required.75mm x 75mm x 60mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including etc. as required.100mm x 100mm x 60mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including etc. as required.150mm x 75mm x 60mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including etc. as required.150mm x 150mm x 60mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including etc. as required.180mm x 100mm x 60mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including etc. as required.2000mm x 125mm x 60mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including etc. as required. 2000mm x 150mm x 60mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including etc. as required.2000mm x 250mm x 60mm

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requited.5/6 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requited.2 way 5/6 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requited. 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requited. 3pin 5/6 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requited.6pin 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requited.bell push

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including holes in cubicle panel , making connections etc . As required. 32A TP&N

Supplying and fixing following way , horizontal type three pole and netural , sheet steel , MCB disribution board , 415 V , on surface / recess , complete with tinned copper bus bar , netural bus bar, earth bar , din bar , interconnections , powder painted including earthing etc. as required.4way (4+12) double door

Earthing with GI earth plate 600x600x6mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal/ coke and salt as required.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 Itr/10 sqm over an under coat of primer applied @ 0.80 Itr/10 sqm of approved brand and manufacture as per DSR

Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of :

SUPPLY/ LAYING OF CEMENT CONCRETE 1:2:4 WITH DALA GRIT AND CHOPAN SAND for slab repairing.

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.8.2.2 Granite stone slab of colour black, Cherry/Ruby red .

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to 1S: 4454 -part 1 and M.S. top cover of required thickness for rolling shutters.10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Earth work in foundation in cutting including lead upto 30m & lift upto 1.5m excluding mechanical compaction but including manual compaction and dressing to profile .

Laying PCC 1:4:8 cement concrete in brick rora with course sand including stuttering as necessary.(for boundry wall )

Brick work in 1:4 cement mortar with corse sand and 1st class brick including all material , Labour T&P etc for proper completion work as per direction of engineer.

Laying CC 1:2:4 in cement , corse sand and stone Agg. 20mm size with all labour and T&P as per engineer in charge .

Providing and fixing coverd kitchen garden framed with rounded ms pipe and compounding with ms grill in suitable iron flat including all labour material T&P etc comleted as per engineer in charge .

Supplying and fixing tree guard frame ms flat using with approved welded mesh including all labour material T&P etc comleted as per engineer in charge .

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes metre

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes metre

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.100 mm nominal dia Pipes as per DSR/DAR

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :15 mm nominal bore including cost of all material, labour and T&P etc.as per DSR

Providing and fixing brass bib cock of approved quality :Providing and fixing CI mouth , brass ferrule 15mm dia as per Integrated SOR

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to 1S:8931as per DSR 18.531 , 15 mm nominal bore each 574.30

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms each 208.45 as per DSR

Providing and fixing PTMT Soap Dish Holder having length of 138 mm,breadth 102 mm, height of 75 mm with concealed fitting arrangements,weighing not less than 106 gms. each 111.45. as per DSR/

Providing and fixing toilet paper holder :C.P. brass each 803.70 as per DSR

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps each

Providing and fixing soil, waste and vent pipes : 100 mm dia ,Sand cast iron S&S pipe as per 1S: 1729 metre 1151.90 as per DSR

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : -100 mm inlet and 100 mm outlet,Sand cast iron S&S as per 1S: 3989

Providing & fixing white vitreous china water less urinal of size 600 x 330x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.as per DSR/DAR Ch-17.31

Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.21 W.C. pan with ISI marked white solid plastic seat and lid each

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per 18:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.101 Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 11.00.as per DSR/DAR Ch-2-2.27

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge. as per DSR/DAR

Providing and Laying 150mm dia boring with 100 mm PVC pipe lowering 40mm GI pipe approved make submercible 1HP motor pump including all labour material T&P etc comleted as per engineer in charge .