Operation and all inclusive comprehensive maintenance of various Electromechanical Services at NTR Area in Kidwai Bhawan, Janpath, New Delhi

Operation and all inclusive Comprehensive maintenance of various Electro-mechanical services as per details & inventory given in relevant sections by deploying the required staff to keep all the services operational up to the required standards etc. as per specification. The services are:- 1. Diesel Engine Alternator sets 2. AC Package Units 3. Window & Split AC Units 4. Electrical Installation & fans i/c. Electrical APFC Panels 5. R.O. System 6. Water Cooler Etc. Staff Required (Must be less than 55 Years age) Round the Clock General /Shift duty Semi-Skilled Un- skilled Semi-Skilled Un-Skilled 1 No. 0 No. 1 No. 1 No. NOTE: - This is tentative list, however it is the responsibility of the agency to operate and maintain various services such as availability of water etc. as & when required even during odd / night hours as per requirements of BSNL & if any additional labour is required the same is to be provided at no extra cost.

Servicing of 500 KVA capacity Diesel Engine Alternator Set through OEM/ Authorized dealers as per manufacturer recommendations including replacement of engine oil and filter cartridges, top up of coolant, Cleaning of air filter , Checking of V-belt, drive and tightness of nuts & bolts , Checking of air and water hose piping, Checking of engine safety fuel pump , Engine protection devices and battery ,properly tightening of all mounting fasteners including Record engine parameters before and after servicing etc. complete as required.

Replacement of existing faulty 180 AH 12 Volts maintenance free Battery of Diesel Engine Alternator Set with new battery of same capacity including making connections, replacement of new battery terminals, testing etc. Complete as required. (Note: The faulty battery shall be the property of firm and rate should be quoted accordingly)

Supplying and installation of EU-2 washable coarse filter having efficiency 90% down to 20 microns filters (test certificate of filters to be supplied)suitable for AC Package units etc. complete as per manufacturer requirement.

Supplying and installation of Synthetic woven washable EU-3 filters with extruded anodized aluminium frame having an efficiency of 95% down to 5 microns (test certificate of filters to be supplied) in the plenum for total supply air. The media shall be supported with HDPE mesh on one side and aluminium mesh on other side.

Making arrangement for the Measurement & Testing of earth resistance of the existing earthing system etc. complete as required.

Painting one or more coats on old work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade i/c removing dust, grease, rust, cleaning the surface with abrasive material etc. complete as required.

Replacement/Supplying, Installation, Testing & Commissioning of Energy Efficient Ultra modern General purpose industrial compact batten suitable for single or twin LED Tube light with integral LED driver, available in single / double side connection options 1233mm x 71mm x 46 mm size LED luminaire having the following specifications i/c dismantling of existing outlived/ faulty conventional luminaire from ceiling, with high brightness SMD LEDs as light source, making suitable arrangement for proper installation etc. complete as reqd in all respect to the entire satisfaction of Engineer-in-charge: - a) Wattage : 20 Watt + 10% b) System lumens efficacy : Not less than 100 lumen per watt c) Driver efficiency : Not less than 85% d) THD : Not more than 10% e) CRI : Not less than 80 f) UGR : Less than 19% g) LED Life : Not less than 50000 hours @ LM 70% h) Colour temperature : 5500 - 6500 K i) Operating voltage range : 140 Volt to 270 Volt j) Material of construction for housing : CRCA powder coated white after phosphochromate treatment k) Electronic Driver : independent Isolated type (Constant current supply) l) Internal surge protection : Not less than 2.5 kV (Make: Phillips, Havells, Wipro)

Note:- 1. The Agency has to submit police verification record & ID proof of each operator. 2. The firm shall provide each operator with working cell phone. 3. The operators may be deputed for duty as per instruction of concerned SDE (E)/JTO (E). 4. Prior approval of Sr. CE (E) is required for deviation in Item No. 8. 5. Penalty shall be imposed in case of absence of any operator as per T & C of contract. 6. The GST / other Input Tax Credit (ITC) taxes shall be quoted by the firm as applicable as per latest amendments of GST Rules. 7. The contractor shall provide correct tariff heads & other details to enable BSNL claim Input Tax Credit. 8. Servicing Scrap items will be credited to the firm. The rate may be quoted accordingly. 9. Bidder must mandatorily quote for all GST components (CGST, SGST, and IGST) as required. 10. If annual maintenance contract charges are required to be quoted as per SOW, basic charges should be shown in column 4 & the Goods and Service Tax (GST) in column 7 to 12. 11. The bidder who submits the offer with concessional Goods and Service Tax (GST) shall submit the proof of applicable concessional GST. In case the Concessional GST is not creditable to BSNL it should be included in the price of the goods/services. 12. In case, dealer is registered under compounding scheme or any rule/notification where the BSNL is not eligible for input tax credit then the bidder should not disclose any amount in column 7 to12 & 14. 13. % age Rate of FF & Packing should be shown of basic unit price excluding all taxes & charges (i.e. as %age of col.4). 14. The FF & packing amount quoted shall not be subject to change after bid evaluation /ordering on account of change of copper, lead base price, change in duties & taxes of item etc. 15. Bidder must mandatorily mention HSN & SAC numbers. 16. Evaluation of bids: - The evaluation and comparison of responsive bids shall be done on the basis of Net cost to BSNL on the prices of the goods & Services (i.e. complete work) offered along with all applicable Taxes, packing Forwarding Freight & Insurance charges etc. exclusive of GST. Declaration by Bidder 1. We hereby declare that in quoting the above prices, we have taken into account the entire credit on inputs available under the GST Act introduced w.e.f. 1 July 2017 and further extended on more items till date. 2. We hereby certify that HSN/SAC shown in column 17 are correct & credit of GST for the amount shown in column 14 above are admissible as per GST Laws. Name of bidder: Seal of Company: GST No./(s)

STAR ELECTRIC WORKS

BRIGHT REFRIGERATION WORKS

kashyap electricalsd

D K ELECTRIC WORKS

PAWAN ENTERPRISES