Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.1 L
Closing Date
31 Dec 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
15 conditions · 3 needing a document upload
c) Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a ) Electrical License: The tenderer/Firm should have valid electrical contractor license on their own name or firm name issued by Electrical licensing board of any state. The license should have been issued on a date prior to the date of tender opening. Copy of License shall be uploaded online failing which offer will be rejected.
b) Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month before the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar nature of work: "Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc. (with or without supply of items / equipment) for 230V, 1phase or 415V, 3phase system or higher voltages".
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Jalna - Development of Infrastructure facilities for Installation of new Pit Wheel Lathe at Coaching Depot Jalna- Electrical arrangements.
NED-E-34-2025-26~SCR
NED-E-34-2025-26
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹2.1 L
31 Dec 2025
9 Dec 2025
17 Dec 2025
151 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,20,20,038.3 | ||
| — | 10.00 | — | — | ||
| Supply, erection, testing and commissioning of Energy saving IP 65 flood light luminaire with high power LED as light source 200 watts including connected accessories. Make: Crompton/Philips /Havells/Bajaj/Orient | — | — | — | 1,20,210 | |
| — | 500.00 | — | — | ||
| Supply, erection and concealed laying of 25 mm dia 2 mm thick PVC pipe (ISI MARK) heavy mechanical stress FRLS with all required accessories including masonary work (chipping etc.) and labour charges etc. | — | — | — | 20,500 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing of terminal junction box IP 66 with metric knockouts including terminals and cable entry. Make: CAPE,Legrand, Hensel, C&S, Indo- Asian only complete with all accessories | — | — | — | 6,860 | |
| — | 110.00 | — | — | ||
| Supply & fixing of PVC Junction box of suitable way for 32/25 mm dia 2 mm thick PVC conduit pipe in concealed | — | — | — | 2,860 | |
| — | 110.00 | — | — | ||
| Supply and erection of ceiling rose. | — | — | — | 4,620 | |
| — | 700.00 | — | — | ||
| Supply and run of 2 nos, 2.5 sq mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sq mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 1554-part 1. | — | — | — | 79,100 | |
| — | 5.00 | — | — | ||
| Supply, erection, testing and commissioning of Thermoplastic Poly carbonate Cable junction box (Dimensions of 300 mm x 450mm x 170 mm (LxBxH)) with IP 65 protection with metric knockouts for cable entry, Double compression glands and with 4 terminals, suitable for cable size 50/70 sqmm including provision for locking arrangements, internal copper cabling andwith all connected accessories as per spec. | — | — | — | 77,715 | |
| — | 20.00 | — | — | ||
| Supply, fixing and connecting and commissioning of DB with industrial plug socket 5 pin 3 pole with 63A capacity (3 phase+ Neutral + Earth) and 63A TP MCB including all connected accessories etc. Make: Legrand/L&T/Crompton/Inso- Asian/Havells/C&S . | — | — | — | 2,27,760 | |
| — | 20.00 | — | — | ||
| Supply, fixing and installation of 32 A industrial 2P+E plug and socket with 32 A DP MCB. Make: Legrand/L&T/INDOASIAN/Schneider. | — | — | — | 67,240 | |
| — | 10.00 | — | — | ||
| Supply and erection of earth electrode as per the enclosed specification. | — | — | — | 40,406.3 | |
| — | 10.00 | — | — | ||
| Supply and fixing of 20 W LED Tube Light fittings conforming to CEE/SC's specificationno. SCR/LED (ID) LIGHT FITTINGS/002(Amdt.4)-2017 or latest. Make:Havells/Syska/Crompton/Bajaj | — | — | — | 4,140 | |
| — | 5.00 | — | — | ||
| Supply and fixing of 28 W 1200 mm BLDC Ceiling Fan, BEE 5 star rated with remote control and all connected accessories conforming to class 1 of IS:374/1979 with amdts 1 to 6 including labor charges. Make:Gorilla/Havells/ CG/Bajaj | — | — | — | 13,270 | |
| — | 2.00 | — | — | ||
| Supply and fixing of Ventilating Fans (Exhaust fan) of 4 pole 300 mm sweep size with metallic body with capacitor conforming to IS No.2312/67 (Reaffirmed 2005)complete with louver and all connected accessories. Make: Havells/CG/Bajaj/Khaitan | — | — | — | 4,852 | |
| — | 6.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP as per required to match the back ground in an approved manner. Make: Legrand/Havells/GM | — | — | — | 1,956 | |
| — | 6.00 | — | — | ||
| Supply and erection of modular type 5 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM | — | — | — | 822 | |
| — | 23.00 | — | — | ||
| Supply and erection modular type switch 6/10 A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make:Legrand/Havells/ GM | — | — | — | 1,219 | |
| — | 17.00 | — | — | ||
| Wiring points: Provision for wiring with two runs of 1.5 sq mm 1100 V and one run of flexible copper conductor 1.5 sq mm 1100 V PVC insulated wires (phase, neutral andearth) in concealed PVC conduit pipe/casing and capping with 6A flush modular type switch control including 2-way switches wherever required, 3 pin ceiling rose and modular type plate cover to MS switch control box including all labor charges complete for fan points, light points, bell points, exhaust fans point etc. All the material used shall be of ISI approved make. | — | — | — | 8,500 | |
| — | 100.00 | — | — | ||
| Supplying & erecting mains with 2x4 sq mm and earth wire 2.5 sq mm FRLSH PVC copper wire in HMS PVC conduit min. 20 mm dia, as per specification Make: Havells/Finolex/Polycab | — | — | — | 20,700 | |
| — | 150.00 | — | — | ||
| Supplying & erecting mains with 2x6 sq mm and earth wire 4 sq mm FRLSH PVC copper wire, in HMS PVC conduit min.20 mm dia, as per specification. Make: Havells/Finolex/Polycab | — | — | — | 39,000 | |
| — | 6.00 | — | — | ||
| Supplying and erecting triple pole andneutral distribution board (TPNDB) with door surface/flush mounted with 4 ways for incoming and 12 ways for outgoing SP/TP MCB's on iron frame/laminated board as per specification No. SW-SWR/MCBDB Make:Legrand/ Havells/L&T | — | — | — | 16,038 | |
| — | 2.00 | — | — | ||
| Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles)for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB Make:Legrand/Havells/L&T | — | — | — | 3,454 | |
| — | 2.00 | — | — | ||
| Supply and erection of 4-way Vertical Load line DB fitted with Busbars, Neutral Links and Blanking Plates suitable for 4 pole MCCB as incomer and 12 ways for MCBs as outgoing with all necessary material and labor complete. Make: L&T/Legrand/ Havells | — | — | — | 27,562 | |
| — | 12.00 | — | — | ||
| Supply, erection and marking TPN MCB 63A,10 kA C-series in provided distribution board as per specification No. SW-SWR/MCB Make:Legrand/ Havells/L&T | — | — | — | 17,820 | |
| — | 30.00 | — | — | ||
| Supply, erection and marking DP MCB 16-32A, 10 kA B-series in provided distribution board as per specification No. SW-SWR/MCBMake: Legrand/Havells/ L&T | — | — | — | 16,350 | |
| — | 6.00 | — | — | ||
| Supply, erection and marking 4P RCCB 63A, 100 mA B-Type in provided distribution board as per specification. Make:Legrand/ Havells/L&T | — | — | — | 25,314 | |
| — | 2.00 | — | — | ||
| Supply, erection and marking 2P RCCB 32A, 30 mA inprovided distribution board as per specification Make:Legrand/Havells/L&T | — | — | — | 3,658 | |
| — | 20.00 | — | — | ||
| Supply, erection and marking SP MCB 6-32A, 10kA B series in provided distribution board as per specification No. SW-SWR/MCB Make: Legrand/Havells/L&T. | — | — | — | 3,540 | |
| — | 1400.00 | — | — | ||
| Supply, errecting and laying of HDPE pipe of PE-80 grade in PN-4 outer dia of HDPE pipe 63 mm (nearest 2"" dia) and wall thickness minimum 2.5 mm maximum 2.8 mm with ""T' joints, bends, elbows etc. including all other connected accessories. Make: M/s.Sudhakar/ Nagarjuna polymer/Nandi/Plasto | — | — | — | 1,84,800 | |
| — | 300.00 | — | — | ||
| Supply and laying of HDPE pipe of PE-80 grade in PN-4 outer dia of HDPE pipe 110 mm (nearest 4"" dia) and wall thickness minimum 4.1 mm maximum 4.3 mm with ""T' joints, bends, elbows etc. including all other connected accessories. Make: M/s.Sudhakar/ Nagarjuna polymer/Nandi/Plasto | — | — | — | 99,300 | |
| — | 150.00 | — | — | ||
| Design, Fabrication, supply, installing and fixing of 300 mm width, 62.5 mm depth, 2mm thick sizes perforated G.I tray (cable Tray) including Horizontal stiffener to avoid sag of tray and vertical bends reducers, tees, cross members and other accessories including fixing with suitable G.I. Clamps / G.I. angles / G.I. flats and with necessary connected hardware etc. | — | — | — | 1,45,500 | |
| — | 1400.00 | — | — | ||
| Supply and laying of HDPE (High Density Polyethylene pipe) pipe of PE-80 Grade in PN- 4 outer dia of HDPE pipe 160 mm (nearest 6" dia) and wall thickness minimum 6.2mm maximum 7.1mm with joints, bens, elbows etc. including all other connected accessories. Make: M/s. Sudhakar/Nagarjuna polymer/Nandi/Plasto only. | — | — | — | 10,15,000 | |
| — | 1400.00 | — | — | ||
| Supply and laying of 4 core 240 sq mm cross linked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed, armored with galvanized round steel wire or steel strip and with Aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098 (Part- 1)/1988 with amdt. no. 1, 2& 3 (reaffirmed 2005) or latest. | — | — | — | 23,14,200 | |
| — | 500.00 | — | — | ||
| Supply and laying of ISI marked 4 core 50 sq mm cross linked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed ,armored with galvanized round steel wire or steel strip and with Aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988 with amdt. no. 1,2 & 3 (reaffirmed 2005) or latest. | — | — | — | 1,58,500 | |
| — | 500.00 | — | — | ||
| Supply, laying, connecting, testing and commissioning of 4 core 70 mm² LT XLPE UG Aluminium Cable, 1100 Volts as per IS: 7098 /Pt.I/1988 or latest make: Polycab /KEI/Havells /Finecab/LS/Gloster only | — | — | — | 1,79,500 | |
| — | 1400.00 | — | — | ||
| Supply and laying of ISI marked 4 core 16 sq mm cross linked polyethylene (XLPE)insulated LT UG cable, PVC outer sheathed,armored with galvanized round steel wire or steel strip and with Aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988 with a. Make: Polycab/Finecab/Finolex/Havells | — | — | — | 2,05,800 | |
| — | 3800.00 | — | — | ||
| Supply and running of 8 SWG GI wire is to be laid for earth continuity. | — | — | — | 47,310 | |
| — | 300.00 | — | — | ||
| Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending,drilling, welding, riveting etc. treated with anti-rust treatment and duly power coated as per the above specification. | — | — | — | 82,200 | |
| — | 60.00 | — | — | ||
| Supplying and erecting of any size electrolyte copper patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% copper purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete. | — | — | — | 74,580 | |
| — | 2.00 | — | — | ||
| Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for 0 to 1000 A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. | — | — | — | 2,994 | |
| — | 2.00 | — | — | ||
| Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display, calibrated for 0-750 V AC suitable to operate on 500 V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer | — | — | — | 2,872 | |
| — | 4.00 | — | — | ||
| Supplying and erecting selector switch suitable for voltmeter/ammeter for 3 phase AC supply 500/1000V, 50Hz, on provided box/ panel and duly connecting with necessary PVC wire leads and lugs. | — | — | — | 1,408 | |
| — | 2.00 | — | — | ||
| Supply & provision of 3 Nos RYB indication lamps of LED type including with all connected accessories complete. | — | — | — | 964 | |
| — | 6.00 | — | — | ||
| Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. | — | — | — | 5,796 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release 400 A range; 4 Pole, MCCB suitable for operation on 415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached .Make: L&T/Legrand /Havells. | — | — | — | 58,290 | |
| — | 2.00 | — | — | ||
| Supply & fixing testing and commissioning of 400 A on-load change over switch suitable to operate on415V, 50 Hz conforms to IS:13947-3 with sheet steel enclosure front handle operated. Make:L&T /Legrand /Havells. | — | — | — | 49,650 | |
| — | 4.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release 200-250 A ; 4 Pole, MCCB suitable for operation on 415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make: L&T/Legrand/Havells. | — | — | — | 75,216 | |
| — | 4.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release 160 A ; 4Pole, MCCB suitable for operation on 415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached.Make: L&T/Legrand/Havells. | — | — | — | 58,512 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release 125 A ; 4 Pole, MCCB suitable for operation on 415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached.Make: L&T /Legrand /Havells. | — | — | — | 23,682 | |
| — | 4.00 | — | — | ||
| Supply, fixing testing and commissioning of 4 Pole MCCB 100 A suitable for operation on 415V, 50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make: L&T/Legrand/Havells | — | — | — | 12,300 | |
| — | 600.00 | — | — | ||
| Excavation of cable trench 30 cm wide x 90 cm deep in all types of soils for HT/LT UG cable as per specification No.Y/E.cable laying/6/99 annexed. | — | — | — | 78,000 | |
| — | 800.00 | — | — | ||
| Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of cable trench 30 cm wide x 90 cm deep road etc., for laying of HT/LT UG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly.Engineer. | — | — | — | 1,72,800 | |
| — | 60.00 | — | — | ||
| Providing & erecting 5 m high (clear height) galvanised OCTAGONAL pole with foundation bolts and it includes 6A SP MCB having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification No. OH-PL/OPL. Make: Bajaj/Valmont/ Transrail /Magnetic Industries | — | — | — | 8,42,220 | |
| — | 60.00 | — | — | ||
| Providing & casting of M - 20 grade reinforced cement concrete (RCC) foundation suitable for 3m to 5m high octagonal /conical G.I. pole considering the safe soil bearing capacity at site as 10 T/sq m at 1.5m depth including supply of steel, concrete,excavation and fixing provided nut bolts withthe help of template as per design in an approved manner. | — | — | — | 1,98,240 | |
| — | 60.00 | — | — | ||
| Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia 'B' class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC | — | — | — | 75,720 | |
| — | 60.00 | — | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 sq mm with necessary lugs at the junction box and necessary termination at the lumaninaire complete. | — | — | — | 24,060 | |
| — | 120.00 | — | — | ||
| Supply and fixing of 40 W LED type weather proof street light fitting complete with allaccessories and conforming to CEE/SC's specification no. SCR/LED (OD) LIGHTFITTINGS/003 (Amdt.3)-2017 or latest.Make: Bajaj/Havells/ Philips | — | — | — | 3,21,120 | |
| — | 10.00 | — | — | ||
| Supplying and erecting programmable digital almanac timer micro controller based with real time clock to operate on derived switching-ON & switching- OFF street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230 V/10 A with 10 hrs. battery backup and manual over drive facility capable todrive different capacity contactors time rerected in provided M.S. box in an approved manner. | — | — | — | 58,880 | |
| — | 1.00 | — | — | ||
| Providing cement concrete for foundation or for concrete filling in 1:3:6 ratio with 20 to 25 mm. stone metal duly plastered with necessary curing for solar water heater panel/Tank mounting structures or any other purposes as per site condition and as directed by site engineer. | — | — | — | 4,837 | |
| — | 1.00 | — | — | ||
| Supplying, erecting and commissioning of diesel generating set with alternator of 160 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p.f. AC a totally enclosed aircooled /liquid cooled multi cylinder diesel engine developing suitable BHP at 1500 rpm along with standard accessories including AMF panel as per prescribed specification. | — | — | — | 18,01,800 | |
| — | 4.00 | — | — | ||
| Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250-micron molecular copper bonded earthing rod of Length 3malong with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete as per RDSO specification No. RDSO/PE/SPEC/PS/0109(Rev.0)-2008. | — | — | — | 44,724 | |
| — | 40.00 | — | — | ||
| Supply, fabrication, laying, welding, and connection of GI Flat of size 25x3 mm from earth pit with GI nut Bolt suitable size. | — | — | — | 3,560 | |
| — | 15.00 | — | — | ||
| Supply and fixing of 25 x 3 mm EC grade copper strip for connecting earth terminal to the bus bar in for maintenance earthing as per RDSO specification No. RDSO/PE/SPEC/PS/0109(Rev.0)-2008 (Amdt. 1) or latest. | — | — | — | 17,790 | |
| — | 50.00 | — | — | ||
| Supply of 100 mm dia 'B' class ERW GI pipe conforming to IS: 1239 Part 1 (2004) and fixing with suitable clamps on wall/building including laying of cable through GI pipe. | — | — | — | 57,150 | |
| — | 1.00 | — | — | ||
| Supply & installation of 75 kVAR automatic power factor correction panel with all connected accessories.Technical specification mentioned in scope of work.(8 steps) | — | — | — | 1,96,444 | |
| — | 80.00 | — | — | ||
| Supply and erection of of 150 W LED HIgh Bay Luminaire with high power COB LED made of pressure diecast alluminium housing with powder coated,Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having efficacy >100 lumines/watt, System efficiency> 95lm/W and junction temprature < 70°C, with Ingrees protection IP66,IK05, Driver surge protection 4KV, In house additional Surge protection 5KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc.,complete Make:Havells/Crompton/Philips /Bajaj/Orient . | — | — | — | 6,61,440 | |
| — | 15.00 | — | — | ||
| Supply, fixing and connecting of 750 mm (30") sweep wall mounting air circulator with all connected accessories. Make : Crompton/Havells/Bajaj/ Usha only. | — | — | — | 1,20,210 | |
| — | 2.00 | — | — | ||
| Supply of Infrared thermal imaging system (Thermal imaging camera) as per SCR specification Lr. No. E.207/TRD/Genl.Corr. dated 14.12.2023, having touch screen, temperature range from -20 degree celsius to 650 degree Celsius, with rechargeable battery bank, tele photo lens & scanned image can be downloaded from USB port to PC, software should be license free so that it can be installed at multiple PC. Material shall procured from OEM or his authorized dealers only. (Detailed specification attached). Make- TESTO/FLIR/FLUKE or similar. | — | — | — | 8,61,400 | |
| — | 5.00 | — | — | ||
| Provision of Set of 05 columns of heavy duty shelving Rack (Powder coated) each column is of size- Height-2800 mm, Width-1350 mm, Depth- 750 mm with 04 vertically adjustable loading levels , loading capacity of 600 Kgs per level as per MS conforming to IS 20262. | — | — | — | 5,63,745 | |
| — | 4.00 | — | — | ||
| Supply of 4 DIGIT EARTH RESISTANCE METER Make : WACO MEASURABLE RANGES - 1 TO 1999 OHM, MEASURABLE EARTH VOLTAGE RESOLUTION- 1000 Volts. Make - Fluke, Metravi & Rishab | — | — | — | 34,028 | |
| — | 30.00 | — | — | ||
| Design, Fabrication and supply of 16 watts LED pit lights fitting, (10W +4W +2W) Aluminum die cast with IP67 Protection necessary hardware material suitable to workon 24 V DC/48V AC. 3 Dimensional type for pit lighting as per latest CEE Specification)Note Prier Approval to be taken including all accessories. | — | — | — | 1,27,680 | |
| — | 30.00 | — | — | ||
| Fixing, connecting, testing and commissioning of 16 W LED pit lighting (10W+4W+2W) with IP 67 protection necessary hardware material for pit lighting including all accessories. | — | — | — | 2,940 | |
| — | 1.00 | — | — | ||
| Design, Supply, of Control Panel Unit containing 3 Nos. SMPS POWER SUPPLY UNITS enclosed in sheet steel enclosure with all connected safety accessories, Indications & Controls, dedicated for the High Power LED Based 16 W LED Pit/Cat walk Lights as per following Specification PANEL containing 3nos. of SMPS units, Each will be suitable for 7 Nos of Pit/Catwalk lights total 7x3=21Nos ofPit/Walk lights) Specification for each SMPS Unit: Input Voltage: 180V to 260 Volts, Output Voltage :24 Volts dc+/- 1% Regulation- C,Output Current: 10 Amps Each SMPS,Protection : Short Circuit Proof, Over Voltage Protection, Ripple:< 200 mv including all accessories. | — | — | — | 22,246 | |
| — | 1.00 | — | — | ||
| Fixing, connecting, testing and commissioning of SMPS BASED Power supply units with connected accessories etc. | — | — | — | 884 | |
| — | 20.00 | — | — | ||
| Supply of 63 A 3P+N+E Industrial Plug works on 3 phase 440 V ,with safety of IP 67 protection. Make: Havells/Legrand/L&T/Schneider | — | — | — | 53,840 | |
| — | 20.00 | — | — | ||
| Supply of 32 A 2P+N+E Industrial Plug works on 230 V single phase,with safety of IP 67 protection. Make: Havells/Legrand/L&T/Schneider | — | — | — | 20,440 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .