Supply Fixing and Installation of Hospital and Residential Buildings Furniture at All India Institute of Ayurveda

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

1.1 Sofa for Living Room

3 seater Dimension- 1940 mm(L)x 880 mm (D) x 950 mm(H) 84,224 421,120

1 seater Dimension- 965mm (L)X 880mm(D) X 950mm(H) 47,040 235,200

Supplying, and placing in position of sofa as per photograph. The sofa have a classic design and a superb

curves. The Sofa stands on molded pvc legs beautiful accents that are slightly curved on the front face of the

sofa. Each curve defines a seating space which provides for people to be seated comfortably. Finished in a

luxurious leatherette,the sofa exudes a certain class. Material & Subtype:Leatherette, Seating Height:18.11",

Legs:PVC, Finish:Matte, Size:Compact. The seat cushion is made of multi layered foam of density 32-35kg/m3.

The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide

lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The

polyster polyfill keeps the upholstery wrinke free & soft. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

1.2 Centre Table for Living Room

Dimension:(L)1130mm X (W)630mm X (H)460mm nos 31,360 5 156,800

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

1.3 Side Table for Living Room

Dimension(L)680mm X (W)530mmX (H)460mm nos 24,416 5 122,080

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

1.4 Dining Table (6 seater)

Dining Table Dimension: (L)1500mmX (W)900mm X (H)760mm

Dining Chair Dimension: (L)450mm X (D)525mm X (H)915mm

Supplying and placing in position of dining table as per Image.The rectangular dining table has a polished

Veneer top and solid wood construction finished in Rosewood for a moisture and scratch resistant finish . The

stylised legs and compact design make this an easy fit into any space. The Solid wood table is paired with 6

Dining Chairs for an elegant dining set. The Emerald Chair has a slatted backrest and an upholstered cushion

for a comfortable seat. Material: Solid Wood - Beech Wood. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

1.5 Double bed for Bedroom area

Bed Dimension: (L)1580mm X (W)2061mm X (H)980mm nos 100,800 5 504,000

Bed side table Dimension: (L)1580mm X (W)2061mm X (H)980mm nos 10,304 10 103,040

Supplying, and placing in position of double bed as per image/drawing. The curved headboard is made with a

designer dual tone finish. The central console is curved with a premium laminate finish. The bed comes with

standard with Hydraulic for a complete storage solution. The box cut design and finish ensure that this bed is

made for the modern Indian home.The frame is made out of 18mm thk prelam particle board & Mattress board

made of 8 to 12mm thk Plywood All the edges are sealed with 2mm pvc edge banding. . Mechanism:Hydraulic.

Supplying, and placing in position of bed side table as per image/drawing. The unit comes in a single finish that

matches the bed frame with contrasting handles for the drawers. The open shelf below allows for storing your

book.Material & Subtype Engineered Wood - Particle Board,Colour & Colour Family Brown - Walnut,Dimension

(L)500mm X (D)400mm X (H)450mm, No Of Drawers :1, No Of Shelves :1. undestructure is made out of 18mm

thk prelaminated particle board with 2mm thk pvc edge banding. The unit should be complete as per image,

and specification under the guidance of Engineer in charge.

1.6 Table for Therapy room

Dimension: (L)1700mm X (W)800mm X (H)980mm nos 64,960 5 324,800

Supplying, and placing in position of therapy table as per Image/drawing . complete structure (head side panel,

leg side panel both side left & right panel) of therapy bed will be made up of 50mm x 50mm solid wood (steam

beach) with pu polish. Mattress plinth should be rest on cross connector made of steam beech & 18mm thk

prelam mdf. Therapy table should have padded mattress with leatherette upholstery of 75mm thk. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

Total Amount Inclusive of GST In Rs= 2,533,440

Total Amount Inclusive of GST In Rs= 2,533,440

2.0 Steam Chamber

2.1 Laying Steam Chamber

Dimension: 1950mm(L)x 1200mm (D) x 1000mm (H) nos 312,000 8 2,496,000

Supplying and placing in position of Laying steam chamber as per image/drawing. The complete structure are

made out of solid teak wood/steam beach wood/fiber with duly poilshed with pu matt/ melamine polish.Provision

of openable top as per shown in image. Patient''s head rests on wooden pillow out side the chamber body rest

on wooden inside the box. The thickness and the design shall be approved by architect engineer in charge.

The unit should be complete as per image, and specification under the guidance of Engineer in charge.

2.2 Sitting Steam Chamber

Dimension: 900mm(L) x 1200mm (D) x 1500mm (H) nos 294,700 12 3,536,400

Digitally signed by

SHUBHAM SHUBHAM GOEL

GOEL 17:41:18 IST

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying and placing in position of sitting steam chamber as per image/drawing. The complete structure are

made out of solid teak wood/steam beach wood/fiber with duly poilshed with pu matt/ melamine polish.Provision

of openable shutter from front and depth in slanting as per shown in image The thickness and the design shall

be approved by architect engineer in charge. Complete as per image, and specification under the guidance of

Engineer in charge.

Total Amount Inclusive of GST In Rs= 6,032,400

Total Amount Inclusive of GST In Rs= 6,032,400

3.0 OPD Hospital Block

3.1 Reception Table

Main Table Dimension(L)3600mm X (D)750mm X (H1050mm (750mm+300)

Storage Dimension(L)1500mm X (D)450mm X (H)750mm

Supplying, and placing in position of Reception Table as per Image. Reception desk top shall be made up of

36mm thick pre laminated particle board with PVC edges. The table top is supported with 25mm thick

understructure of side panels and modesty panels. The front of the table is provisioned with designed wooden

panel & given an extra glass top at 1050mm height. The table includes a mobile pedestal of size L-400mm x D-

450mm x H-650mm made of 18mm thick prelaminated particle board with PVC edges. The pedestal is

provisioned with 2 drawers and one filing drawer with locking facility.Reception Table having a provision of side

storage as per Image . storage unit should having Openable shutters with drawer provision. The storage unit

top shall be made of 36mm thick prelaminated particle board & understurcture shall be made of 18mm thk

prelam particle board for (side panel, back panel & shelf) with provision of handles & Locking arrangement.

Provision of pedestal in prelam particle board of size 400Lx 450Dx714HT (2 drawer + 1filing). All exposed

edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

3.2 Reception Chair nos 13,776 2 27,552

Supplying, and placing in position of Revolving medium back chair . The chair of size 620mm (W) x 490 (D)x

990mm (H). The chair with arm rest of which seat shall be made up of 12mm thk hot pressed plywood

upholstered with fabric in front and back in ABS moulded with polyurethene foam. Provision of tilt tension

adjustment,upright locking facility and full 360 degree swivel mechanism . The base should be made of crome

finished and fitted with 5 nos twin nylon castor. The pitch centre diameter of the base along with castors should

bot exceed 660mm, hydralic height adjustment stoke should be 60-80mm and shall be operated at 30 kg.

extension force. The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 D. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

3.3 Sofa for Entrance Lobby (3+3)

3 seater Dimension : (L)1650mm X (D)750mm X (H)710mm nos 66,752 2 133,504

Supplying, and placing in position of sofa as per Image.A supple Camel Brown premium Leatherette upholstery

adds class to the soft cushioned backrest and seating. Sitting proudly on sleek steel legs the sofa exudes a

sense of comfort that is perfect for any space. Material & subtype:Premium Leatherette, Colour & Colour

Family:Brown-Camel Brown, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact,

Style:Modern, Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The

seat cushion is made of multi layered foam of density 35-38 kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. The unit should be complete as per image, and specification under the guidance of Engineer in

3.4 Centre Table for Entrance Lobby

Dimension:(L)1130mm X (W)630mm X(H)410mm nos 31,360 1 31,360

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

3.5 Side Table for Entrance Lobby

Dimension(L)680mm X (W)530mm X(H)460m nos 24,416 3 73,248

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary.The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

3.6 Main Table for OPD Consultation room/ Doctor's Room/ Registration room

Dimension(L)1600mm X (W)750mm X(H)750m nos 62,810 34 2,135,526

Dimension(L)1000mm X (W)750mm X(H)750m nos 42,800 68 2,910,400

Supplying, and placing in position of Free standing table as per Image/drawing. The table top made up of 25mm

thick pre-laminated particle board with 2mm thk pvc edge banding . The Table supported with 18mm thk Prelam

Particle board side panel & Modesty panel. The working edges shall be provided with machine pressed 2mm

thick PVC edging using special hot melt glue at hot temperature. Provision of one fixed Pedestal storage unit

(combination of two drawers and one filing drawer) . Pedstal Unit of size: size:- L-400mm x D-450mm x H-

600mm)made out of 18mm thk prelaminated particle board with 2mm thk pvc edge banding..Also having a

provision of pvc keyboard tray & metal cpu trolley. The unit should be complete as per image, and specification

under the guidance of Engineer in charge.

3.7 Back storage for OPD Consultation room/ Doctor's Room/ Registration room

Dimension : (L)1500mm X (D)450mm X (H)750mm nos 28,000 33 924,000

Supplying , and placing in position of side storage as per photograph/drawing. The complete storage unit shall be

made up of 18 mm thick prelam particle board with 2mm thk pvc edge banding . The storage shall be

provisioned with shelves and 2 nos compartments .The storage shall have openable shutters with handles and

locking arrangements. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

3.8 Main Chair for OPD Consultation room/ Doctor's Room/ Registration room nos 18,592 102 1,896,384

Supplying, and placing in position of 360 degree revolving high mesh back chair as per Image. Styled for the

contemporary office space the chair boasts of a curved backrest with a central console for lower back support.

this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek chrome

vaulted base with its individual prongs powered by nylon castors. A complete executive office chair, Jordon will

bring you comfort like never before. Material & Subtype:Mesh, Colour & Colour Family:Black

Dimension(W)640mm X (D)480mm X (H)1240mm, Back Type:High Back, Base:Chrome Base, Base

Type:Revolving, Maximum Seating Height:1240mm, Minimum Seat Height:1140mm, Function-

Revolving::Pneumatic Height adjustment::Tilt Tension adjustment::Synchro tilt locking: PU adjustable handle :

adjustable lumbar support .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with

PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3 . The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

3.9 Main Chair for OPD Consultation room/ Doctor's Room/ Registration room nos 14,500 68 986,000

Supplying, and placing in position of medium mesh back cantilver chair as per photograph. The mesh chair of

Size :- (W)610mm X (D)470mm X (H)940mm. The breathable mesh back chair with cushioned fabric seat shall

beergonomically design with adjustable lumbar back support . The chair shallprovisioned with adjustable armrest

with PU padding. The seat cushion to beupholstered on 10-12mm thick water proof plywood and cut foam. The

seat to bemade with 10- 12 mm thick hot pressed BWR plywood upholsetered withPolyurethane foam and mesh

fabric over it. The tubular visitor frame shall bepowder coated (DFT 40-60 microns) cantilever structure and

made of dia2.54+/-0.03cm x 0.2+/-0.016cm thick MSERW tube with a connecting M.Sspine welded to it. The

unit should be complete as per image, and specification under the guidance of Engineer in charge.

3.10 Patient Stool for OPD Consultation room/ Doctor's Room

Supplying, and placing in position of revolving stool. Only Seat top is SS 202 Grade & Legs in

MS powder coating. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

3.11 Medical Bed for checkup for OPD Consultation room/ Doctor's Room

Supplying, and placing in position of medical check up bed as per Image/drawing . complete structure (head

side panel, leg side panel both side left & right panel) of medical check up bed will be made up of 18mm thk

commerical ply with 1mm thk post laminate with 2mm thk pvc edge banding. Mattress plinth made of 18mm thk

plain commerical ply with 1mm thk post laminate with 2mm thk pvc edge bAnding. Mattress panel will be rest on

the cross strips panel. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

3.12 Help Desk for OPD Waiting hall/ triage area

Main Table Dimension: (L)3300mm X (W)750mm X (H)1050m (750mm+300mm)Complete unit made by 2 sets

of table of size(1650 (L) of table ) with one pedstal each of them

Dimension(L)2500mm X (W)750mm X (H)1050m (750mm+300mm)Complete unit made by 2 sets of table of

b size(1250 (L) of table ) with one pedstal each of them nos 229,600 2 459,200

Side storage Unit Dimension: (L)1500mm X (W)450mm X (H)1050mm

c Main Table Dimension: (L)2250mm X (W)750mm X (H)1050m (750mm+300mm)with one pedstal nos 151,088 4 604,352

Main Table Dimension(L)10200mm X (W)750mm X (H)1050m (750mm+300mm)Complete unit made by 6 sets

d of table of size(1700 (L) of table ) with one pedstal each of them nos 867,888 1 867,888

Side storage Unit Dimension: (L)8030mm X (W)450mm X (H)1050mm

Main Table Dimension(L)8800mm X (W)750mm X (H)1050m (750mm+300mm)Complete unit made by 4 sets

e of table of size(2200 (L) of table ) with one pedstal each of them Side storage Unit Dimension: (L)900mm X nos 804,160 4 3,216,640

f Main Table Dimension: (L)5500mm X (W)750mm X (H)1050m (750mm+300mm) nos 357,280 3 1,071,840

Main Table Dimension(L)2100mm X (W)750mm X (H)1050m (750mm+300mm) with one pedstal

Side storage Unit Dimension: (L)900mm X (W)450mm X (H) 1050mm

Supplying, and placing in position of Table as per Image/drawing . Table top made up of 36mm thick pre-

laminated particle board and understructure shall be made of 25mm thick prelaminated particle board with 2mm

thk pvc edge banding . Modesty & side panel shall be 25mm thk prelam particle board with 2mm thk pvc edge

banding . Working Table top height will be 750mm from the floor level & one additional 25mm thk top at the

height of 300 mm above the table top rest on prelam vertical panel of 400 mm depth. . overall ht of the table

1050mm. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot

melt glue at hot temperature. Provision of PLPB Mobile pedestal of 400Lx 450Dx600HT (2 drawer + 1filling).

Pedestal Top made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18

mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick

PVC lipping glued with hot melt EVA glue.Supplying, and placing in position of side storage @ 1050mm height

as per photograph. The modular storage unit top shall be made from 25mm thick pre-laminated particle board

and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board

while back to be made of 18 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick

PVC lipping . Each unit to have openable shutters with locking provision. The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

3.13 Chair with counter for OPD Waiting hall nos 17,472 56 978,432

Supplying, and placing in position of 360 degree revolving medium mesh back chair as per Image. Styled for

the contemporary office space the chair boasts of a curved backrest with a central console for lower back

support. this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek

chrome vaulted base with its individual prongs powered by nylon castors. A complete executive office chair,

Jordon will bring you comfort like never before. Material & Subtype:Mesh, Dimension:(W)610mm X (D)470mm X

(H)1040mm, Back Type:Medium Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating

Height:1040mm, Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height adjustment::Tilt Tension

adjustment::Synchro tilt Locking:PU adjustable handle : adjustable lumbar support . The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3. The unit should be complete as per image, and specification under the guidance

of Engineer in charge.

3.14 Waiting sofa for OPD Waiting hall/ General Waiting area/ Registration room

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

3 Seater Dimension- 1860mm (L) x 760mm (D) x 790mm (Ht) nos 30,016 125 3,752,000

2 Seater Dimension- 1230mm (L) x 760mm (D) x 790mm (Ht) nos 19,862 63 1,251,306

Supplying, and placing in position of waiting sofa of size as per Image. P/F waiting hall chairs made of steel duly

chrome plated. The seat and back are made of perforated steel sheet duly powder coated in silver colour. The

side of seat and back are encased in chrome plated metal memder for elegent finishes. The leathereete pad

with the cushioning in back & seat to be provided for seating comfort. Complete as per image, and specification

under the guidance of Engineer in charge.

3.15 Sofa for Double height Entrance Lobby/Doctor's Lounge /OT Doctor

3 seater Dimension : (L)1650mm X (D)750mm X (H)710mm nos 66,752 27 1,802,304

2 seater Dimension(L)1390mm X (D)750mm X (H)710mm nos 53,536 9 481,824

Supplying, and placing in position of sofa as per Image.A supple Camel Brown premium Leatherette upholstery

adds class to the soft cushioned backrest and seating. Sitting proudly on sleek steel legs the sofa exudes a

sense of comfort that is perfect for any space. Material & subtype:Premium Leatherette, Colour & Colour

Family:Brown-Camel Brown, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact,

Style:Modern, Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The

seat cushion is made of multi layered foam of density 35-38 kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. The unit should be complete as per image, and specification under the guidance of Engineer in

3.16 Centre Table for Double height Entrance Lobby/Doctor's Lounge /OT Doctor

Dimension:(L)1130mm X (W)630mm X(H)410mm nos 31,360 27 846,720

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

3.17 Side Table for Double height Entrance Lobby/Doctor's Lounge /OT Doctor

Dimension(L)680mm X (W)530mm X (H)460mm nos 24,416 47 1,147,552

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

Total Amount Inclusive of GST In Rs= 30,178,272

Total Amount Inclusive of GST In Rs= 30,178,272

4.0 Hospital Block

4.1 Main Table for MS Office

Main Table Dimension:(L)2800mm X (D)1130mm X (H)770mm

Side Runner Dimension: :(L)1200mm X (D)600mm X (H)770mm

Supplying, and placing in position of table as per photograph. This precise Durian Boss's Desk is designed with

superb qualityFinish made of engineered wood-medium density fibre board & veneer glossy finish on the same.

Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the

office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The modesty frame of the table

gives the great look with panel upholstered wth PVC material which gives the leatherette look.Main Table top

4.2 Main Chair for MS Office nos 18,032 1 18,032

Supplying, and placing in position of 360 degree revloving high back chair as per Image. The high mesh back

chair is a magnificient chair with creative tree detailing, so when you look at it from afar it feels as if a tree is

emerging from the roots to the branches and leaves on the top. The leaves add function to the design being

adjustable for improved lumbar support. The chair with adjustable headrest & armrests. Material & Subtype:

Mesh, Colour & Colour Family: Black, Dimension(W)600mm X (D)500mm X (H)1282mm, Back Type:high Back,

Base:Aluminium Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum Seat Height:17.32",

Function: Revolving::Pneumatic Height Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable Armrest, 3 D Lumbar

Support,Locking Mechanism: self tention adjustment/any position multi locking, chair Handle: adjustable handle

with pp pad . The Seat are made up of 12mm thk hot pressed plywood upholstered with moulded foam and

fabric, chair seat has foam of density 32-35 kg/m3. The unit should be complete as per image, and specification

under the guidance of Engineer in charge.

4.3 Visitor Chair for MS Office nos 16,464 4 65,856

Supplying, and placing in position of 360 degree revloving medium back chair as per Image. The medium

mesh back chair is a magnificient chair with creative tree detailing, so when you look at it from afar it feels as if a

tree is emerging from the roots to the branches and leaves on the top. The leaves add function to the design

being adjustable for improved lumbar support. The chair with adjustable armrests.Material & Subtype: Mesh,

Colour & Colour Family: Black, Dimension(W)600mm X (D)500mm X (H)1090mm, Back Type:Medium Back,

Base:Aluminium Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum Seat Height:17.32",

Function: Revolving::Pneumatic Height Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable, Armrest, 3 D Lumbar

Support,Locking Mechanism: self tention adjustment/any position multi locking, chair Handle: adjustable handle

with pp pad . The Seat are made up of 12mm thk hot pressed plywood upholstered with moulded foam and

fabric, chair seat has foam of density 32-35 kg/m3. Complete as per image, and specification under the

guidance of Engineer in charge.

4.4 Sofa for MS Office

3 seater Dimension (L)1905mm X (D)890mm X (H)870mm nos 71,456 1 71,456

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. . The

Sofa of stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa.

Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown

Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows

along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa

The seat cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. The unit should be complete as per image, and specification under the guidance of Engineer in

4.5 Centre Table for MS Office

Dimension:(L)1130mm X (W)630mm X(H)410mm nos 31,360 1 31,360

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to your living room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. Complete as per image, and specification under the

guidance of Engineer in charge.

4.6 Side Table for MS Office

Dimension(L)680mm X (W)530mm X(H)460mm nos 24,416 2 48,832

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

4.7 Main Table for PS to MS

Main Table Dimension : 1800mm(L) X 750mm(D) X 750mm(H)

Side Unit Dimension : 1200mm(L) X 450mm(D) x 750mm(H)

Supplying, and placing in position of main Table as per drawing.The Table top made out of 25mm thk prelam

particle board with 2mm thk pvc edge banding & side panel & modesty panel made up of 18mm thick pre-

laminated particle board .The working edges shall be provided with machine pressed 2mm thick PVC edging

using special hot melt glue at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-

450mm x H-600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one filing

drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of

handles & central Locking arrangement. The table have a provision of free standing Side Storage of size

1200mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm thick pre laminated particle board and rest

all storage to be made out of 18 mm thick prelaminated particle board . All exposed edges shall be provided

with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having a provision of 3

drawer unit, one openable shutter, one open storage with handle & central locking provision. The unit should

be complete as per image, and specification under the guidance of Engineer in charge.

4.8 Main Chair for PS to MS nos 15,456 1 15,456

Supplying, and placing in position of Revolving High back chair. The chair of size 620mm (W) x 490mm (D) x

1240mm (H) . The chair with arm rest of which seat shall be made up of 12mm thk hot pressed two pieces

plywood upholstered with fabric in front and back in ABS moulded with polyurethene foam. Provision of tilt

tension adjustment,upright locking facility and full 360 degree swivel mechanism . The base should be made of

crome finished and fitted with 5 nos twin nylon castor. The pitch centre diameter of the base along with castors

should bot exceed 660mm, hydralic height adjustment stoke should be 60-80mm and shall be operated at 30 kg.

extension force. The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 D. The backrest has a foam of 28D. The unit should

be complete as per image, and specification under the guidance of Engineer in charge.

4.9 Visitor Chair for PS to MS nos 13,776 2 27,552

Supplying, and placing in position of Revolving medium back chair . The chair of size 620mm (W) x 490 (D)x

990mm (H). The chair with arm rest of which seat shall be made up of 12mm thk hot pressed plywood

upholstered with fabric in front and back in ABS moulded with polyurethene foam. Provision of tilt tension

adjustment,upright locking facility and full 360 degree swivel mechanism . The base should be made of crome

finished and fitted with 5 nos twin nylon castor. The pitch centre diameter of the base along with castors should

bot exceed 660mm, hydralic height adjustment stoke should be 60-80mm and shall be operated at 30 kg.

extension force. The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 D. The backrest has a foam of 28D .The unit should be

complete as per image, and specification under the guidance of Engineer in charge.

4.10 Linear Workstation for PS to MS/ Adminstration area/ Pharmacy Area

Dimension : 1200mm(L) X 600mm(D) X 1200mm(H) nos 77,168 3 231,504

Dimension : 1500mm(L) X 600mm(D) X 1200mm(H) nos 86,083 7 602,582

Dimension : 1050mm(L) X 600mm(D) X 1200mm(H) nos 64,500 14 903,000

Supplying and placing in position of sliding tile base modular Workstation as per photograph/drawing. Free

standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm

thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims

shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims

shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition.

The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have

provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have

adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another

above / below the table top. The complete partitioning work shall be carried out as per the approved drawing.

Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop

shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should

be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges

shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. .

Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. Also a

provision of Mobile Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of 2 drawer &

one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with

provision of handles & central Locking arrangement. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

4.11 L- shape Workstation for Adminstration area

Dimension : 1500mm(L) + 1500(L) X 600mm(D) X 1200mm(H) nos 98,784 4 395,136

Supplying and placing in position of sliding tile base modular Workstation as per photograph. Free standing

partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.2-1.5mm thick mild

steel. Horizontal and vertical trims are made out of extruded aluminum of 1.2-1.5mm thick. All Panels/trims shall

be powder coated with 50 micron. Aluminum trims are elegantly fixed with hidden connectors on the partition.

The frame work shall be fitted with 8mm thick pre laminated Particle tiles of approved shade. Partition shall have

provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have

adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another

above / below the table top. The complete partitioning work shall be carried out as per the approved drawing.

Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop

shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should

be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges

shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature.

Provision of one PVC keyboard tray and CPU trolley for each seating. Also a provision of Pedestal Unit (size:- L-

400mm x D-450mm x H-600mm) with a combination of 2 drawer & one filing drawer. The pedestal storage unit

shall be made of 18 mm thick prelaminated Particle board with provision of handles & Locking arrangement.

The unit should be complete as per image, and specification under the guidance of Engineer in charge.

4.12 Workstation Chair for PS to MS / Adminstration area/ Pharmacy Area nos 17,472 28 489,216

Supplying, and placing in position of 360 degree revolving medium mesh back chair as per Image. Styled for

the contemporary office space the chair boasts of a curved backrest with a central console for lower back

support. this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek

chrome vaulted base with its individual prongs powered by nylon castors. A complete executive office chair,

Jordon will bring you comfort like never before. Material & Subtype:Mesh, Dimension:(W)610mm X (D)470mm X

(H)1040mm, Back Type:Medium Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating

Height:1040mm, Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height adjustment::Tilt Tension

adjustment::Synchro tilt Locking:PU adjustable handle : adjustable lumbar support . The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3. The unit should be complete as per image, and specification under the guidance

of Engineer in charge.

4.13 Main Table for Adminstration area

Dimension: 1600mm(L) X 600mm(D) X 750mm(H) nos 62,810 1 62,810

Supplying, and placing in position of Free standing table as per Image/drawing. The table top made up of 25mm

thick pre-laminated particle board with 2mm thk pvc edge banding . The Table supported with 18mm thk Prelam

Particle board side panel & Modesty panel. The working edges shall be provided with machine pressed 2mm

thick PVC edging using special hot melt glue at hot temperature. Provision of one fixed Pedestal storage unit

(combination of two drawers and one filing drawer) . Pedstal Unit of size: size:- L-400mm x D-450mm x H-

600mm)made out of 18mm thk prelaminated particle board with 2mm thk pvc edge banding..Also having a

provision of pvc keyboard tray & metal cpu trolley. The unit should be complete as per image, and specification

under the guidance of Engineer in charge.

4.14 Main Chair for Adminstration area nos 18,592 1 18,592

Supplying, and placing in position of 360 degree revolving high mesh back chair as per Image. Styled for the

contemporary office space the chair boasts of a curved backrest with a central console for lower back support.

this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek chrome

vaulted base with its individual prongs powered by nylon castors. A complete executive office chair, Jordon will

bring you comfort like never before. Material & Subtype:Mesh, Colour & Colour Family:Black

Dimension(W)640mm X (D)480mm X (H)1240mm, Back Type:High Back, Base:Chrome Base, Base

Type:Revolving, Maximum Seating Height:1240mm, Minimum Seat Height:1140mm, Function-

Revolving::Pneumatic Height adjustment::Tilt Tension adjustment::Synchro tilt locking: PU adjustable handle :

adjustable lumbar support .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with

PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3 . The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

4.15 Visitor Chair for Adminstration area nos 17,472 2 34,944

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying, and placing in position of 360 degree revolving medium mesh back chair as per Image. Styled for

the contemporary office space the chair boasts of a curved backrest with a central console for lower back

support. this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek

chrome vaulted base with its individual prongs powered by nylon castors. A complete executive office chair,

Jordon will bring you comfort like never before. Material & Subtype:Mesh, Dimension:(W)610mm X (D)470mm X

(H)1040mm, Back Type:Medium Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating

Height:1040mm, Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height adjustment::Tilt Tension

adjustment::Synchro tilt Locking:PU adjustable handle : adjustable lumbar support . The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3. Complete as per image, and specification under the guidance of Engineer in

4.16 Conference Table

DImension : 9500mm(L) X 2550mm(D) X 750(H) (Individual table depth 600mm) nos 1,107,680 1 1,107,680

Supplying, and placing in position of conference table as per photograph/drawing . The table should be

provided in modules of 2 seater. The dimensions for two seater module should be 1500mm(L) x 600mm(W) x

750mm(H).The work surface top made out of 45mm thk prelam particle board with 2mm thk pvc edge

banding.. The side panel made up of 36mm thk prelam particle board & modesty panel made out of 25mm thk

prelam particle board with 2mm thk pvc edge banding. The legs of the table should be Made from 36mm thk

prelam particle board with 2mm thk pvc edge banding . The wire carrier should Made from 0.6mm thick CRCA &

powder coated 40-50 microns . Also provision of fliptop box (13nos) & metal raceway for wire flow. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

4.17 Conferrence Main chair nos 32,816 2 65,632

Supplying, and placing in position of 360 degree revolving High back chair as per Image. This contemporary

chair comprises of luxurious double padding cushion with a central indent that provides lower back support for

proper posture and comfort. The central panel in the backrest is neatly stitched with a soft seat cushion finished

in the same black leatherette. The Chair nestles on a shiny chrome vaulted base with nylon castors. the shiny

armrests come adeptly padded for comfort. Material & Subtype:Leatherette, Colour & Colour Family:Black

,Dimension(W)625mm X (D)490mm X (H)1210mm, Back Type:High Back, Base:Chrome Base, Base

Type:Revolving, Maximum Seating Height:25", Minimum Seat Height:21.25",Function: Revolving::Pneumatic

Height Lift::Tilt Tension Control::Centre Tilt, Locking Mechanism:Centre Tilt. The pneumatic height adjustment

shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back are

made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam

of density 32-35 kg/m3 . The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

4.18 Conferrence Visitor chair nos 29,008 24 696,192

Supplying, and placing in position of 360 degree revolving medium back chair as per Image. A contemporary

design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in

an all black premium leatherette makes for one comfy seat. The side padding and the headrest sit snugly

providing added lumbar support to the user. Material & subtype:Premium Leatherette, Colour & Colour

Family:Black, Dimension(W)625mm X (D)490mm X (H)1135mm,Back Type:medium back, Base:Chrome Base,

Maximum Seating Height:19",Finish:Matte.The pneumatic height adjustment shall have adjustment stroke of 100

mm and shall be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The

backrest has a foam of 28kg/m3. The unit should be complete as per image, and specification under the

guidance of Engineer in charge.

4.19 Main Table for Cheif Medical Centre

Main Table Dimension : 2200mm(L) X 900mm(D) X 740mm(H)

All over Side Unit Dimension : 2000mm(L) X 750mm(D) x 660mm(H)

Supplying and placing in position of Table as per photograph. This precise Boss's Desk of all over size :-

(L)2200mm X (D)2000mm X (H)740mm is designed with superb quality. The table shall be made with a

combination of engineered wood as particle board, this gorgeous desk has contrasting panels in black for a

contemporary look.The table top of 2200mm length x 900mm depth and 45mm thickness shall be Coupled with

a runner and storage of size :- L-2000mm x D-750mm x H-660mm for your files and cabinets. The overall side

storage shall be made with 18mm thick particle board finished with 2mm thick PVC edge banding of matching

shade.The side storage shall be provisioned with openable shutter storage, 3 drawers (2 equal drawers+ 1 filing

drawer) pedestal and open storage with handles and locking arrangement. The table shall also be provisioned

with a pedestal at opposite side of storage. The pedestal shall be with a combination of 2 drawers and 1 filing

drawer. With a warm walnut finish, the dual tone finish of the desk adds to its overall style and finish.The font

side of the table shall have design element finished in leatherite. Complete as per image, and specification

under the guidance of Engineer in charge.

4.20 Main Chair for Cheif Medical Centre nos 18,032 1 18,032

Supplying, and placing in position of 360 degree revloving high back chair as per Image. The high mesh back

chair is a magnificient chair with creative tree detailing, so when you look at it from afar it feels as if a tree is

emerging from the roots to the branches and leaves on the top. The leaves add function to the design being

adjustable for improved lumbar support. The chair with adjustable headrest & armrests. Material & Subtype:

Mesh, Colour & Colour Family: Black, Dimension(W)600mm X (D)500mm X (H)1282mm, Back Type:high Back,

Base:Aluminium Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum Seat Height:17.32",

Function: Revolving::Pneumatic Height Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable Armrest, 3 D Lumbar

Support,Locking Mechanism: self tention adjustment/any position multi locking, chair Handle: adjustable handle

with pp pad . The Seat are made up of 12mm thk hot pressed plywood upholstered with moulded foam and

fabric, chair seat has foam of density 32-35 kg/m3. The unit should be complete as per image, and specification

under the guidance of Engineer in charge.

4.21 Visitor Chair for Cheif Medical Centre nos 16,464 3 49,392

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying, and placing in position of 360 degree revloving medium back chair as per Image. The medium

mesh back chair is a magnificient chair with creative tree detailing, so when you look at it from afar it feels as if a

tree is emerging from the roots to the branches and leaves on the top. The leaves add function to the design

being adjustable for improved lumbar support. The chair with adjustable armrests.Material & Subtype: Mesh,

Colour & Colour Family: Black, Dimension(W)600mm X (D)500mm X (H)1090mm, Back Type:Medium Back,

Base:Aluminium Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum Seat Height:17.32",

Function: Revolving::Pneumatic Height Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable, Armrest, 3 D Lumbar

Support,Locking Mechanism: self tention adjustment/any position multi locking, chair Handle: adjustable handle

with pp pad . The Seat are made up of 12mm thk hot pressed plywood upholstered with moulded foam and

fabric, chair seat has foam of density 32-35 kg/m3. . Complete as per image, and specification under the

guidance of Engineer in charge.

4.22 Sofa for Cheif Medical Centre

3 seater Dimension (L)1905mm X (D)890mm X (H)870mm nos 71,456 1 71,456

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. . The

Sofa of stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa.

Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown

Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows

along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa

The seat cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. The unit should be complete as per image, and specification under the guidance of Engineer in

4.23 Centre Table for Cheif Medical Centre

Dimension:(L)1130mm X (W)630mm X(H)410mm nos 31,360 1 31,360

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

4.24 Side Table for Cheif Medical Centre

Dimension(L)680mm X (W)530mm X(H)460m nos 24,416 2 48,832

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

4.25 Medical Bed

Dimension:(L)2250mmX (W)1050mmX (H) 560mm nos 76,160 219 16,679,040

Supplying, and placing in position of medical bed as per image/drawing.The Bed Should Have Approx (L)

2250mmX (W)1050mmX (H) 560mm.It should be a two function bed which have adjustable backrest and upper

leg rest. It should have fixed height as per the human anthropometric study. Bed Frame MS ERW RECT Tube

and MS ERW Round tube should be made of 30mm X 60mm and Ø 25.4 mm Section respectively of 1.6mm

thickness. . All the functions should operate with the help of 2 ergonomically dedicated handles, which are made

of metal inserted PP co polymer, it's lever should be snap locked when not in use. Head & Foot board should be

made of blow molded Poly propylene. Head board and foot board should be with metal inserts to mound it on

bed frame. Removable PP head board and foot board should have cut outs , for better gripping. Lying surface

should be made of CRCA sheet of thickness of 1 mm. This lying surface should have 4 sections for bed profiling

i.e. back adjustment, fixepelvic section, upper and lower leg adjustment. High endurance metal castors provided

with dual locking arrangement are diagonally placed. Wheel Dia 125mm Diagonal locking should provide

betterStability to bed in the locked position. The unit should be complete as per image, and specification under

the guidance of Engineer in charge.

4.26 Side table with Medical Bed

Dimension:(L)450mmX (W)450mmX (H) 800mm nos 9,800 219 2,146,200

Supplying, and placing in position of side table with medical bed as per image/drawing. Side table made out of

.0.8 mm thk CRCA for top & Drawer . The table top supported with ms powder coated "C" shape legs of size

50mm x 50mm. Comprising of metal powder coated cross connectors of size 40mm X40mm. The side table

having a provision of one drawer with handle and locking arrangement also provision of open space as per

shown in image. The unit should be complete as per image, and specification under the guidance of Engineer

4.27 Dining Table

Dimension:(L)2000mmX (W)1000mmX (H) 750mm nos 107,520 3 322,560

Dimension:(L)1800mmX (W)1200mmX (H) 750mm nos 99,680 6 598,080

Supplying, and placing in position of dining table as per image/drawing. Table top made out of 25mm thk

prelaminated particle board with 2mm thk pvc edge banding with SS "C" shape legs of size 50mm x 50mm.

Comprising of metal powder coated cross connectors of size 40mm X 40mm . The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

4.28 Dining Chair nos 3,877 48 186,117

Supplying, and placing in position of cafe chair as per image. size: (l)381mm x (d)419mm x (h)839mm.The seat

and back in pvc moulded chair with ss 202 grade frame round pipe. The chair comes in various colours - green,

black, red,yellow, blue, brown, orange, white. The unit should be complete as per image, and specification under

the guidance of Engineer in charge.

4.29 Help Desk for Double height Entrance Lobby

Dimension:2400 mm (W) x 1065 mm (D)x750mm (H) nos 184,900 1 184,900

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying and placing in position of Reception table as per photograph/drawing. The main desk top shall be

made out of 25mm thick prelam particle Board with and supported with 18mm thick prleam particle Board side

panels & Metal perforated modesty panel . The working & non working edges shall be provided with machine

pressed 2mm thick PVC edging. Reception Table shall have one fixed pedestal unit attached to the table top

and side panel . Pedestal sides, front and bottom shall be made out of 18mm thick prelam particle Board with

approved shade ,drawer bottom and backing of the pedestal shall be of 9mm thick prelaminated particle board

of approved shade. Provision of CPU trolley & Key Board Travi with extra 8mm thk Glass Top.

Total Amount Inclusive of GST In Rs= 25,867,593

Total Amount Inclusive of GST In Rs= 25,867,593

5.0 Lab Furniture

5.1 Lab Counter (u shaped counter) for Immunology lab

Dimesnion: 6330mm(L) x 9000mm(L) x 5215mm(L) x 600mm(D) x 750mm(H) nos 484,785 1 484,785

Supplying & placing in position of u shaped lab storage as per Image/drawing. Complete structure (top,sides,

drawers,shelves,bottom & openable shutter) are made out of 18mm thk prelam particle board with 2mm thk pvc

edge banding while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2

mm thick PVC lipping. Provision of granite/corian placed on the top The storage shall be provisioned with drawer

& openable shutter with D shape handles & locking arrangement. The unit should be complete as per image,

and specification under the guidance of Engineer in charge.

5.2 Lab Counter for Clean room/Incubation room/ Hematology Lab/Sterilization room/ Serology area

Dimesnion: 3300mm(L) x 600mm(D) x 750mm(H) nos 77,963 1 77,963

Dimesnion: 3600mm(L) x 600mm(D) x 750mm(H) nos 85,050 1 85,050

Dimesnion: 4600mm(L) x 600mm(D) x 750mm(H) nos 108,438 4 433,752

Dimesnion: 2600mm(L) x 600mm(D) x 750mm(H) nos 60,952 1 60,952

Dimesnion: 4260mm(L) x 600mm(D) x 750mm(H) nos 100,642 1 100,642

Supplying & placing in position of lab storage as per Image/drawing. Complete structure (top,sides,

drawers,shelves,bottom & openable shutter) are made out of 18mm thk prelam particle board with 2mm thk pvc

edge banding while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2

mm thick PVC lipping. The storage shall be provisioned with drawer & openable shutter with D shape handles &

locking arrangement. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

5.3 Overhead Storages

Dimesnion: 3000mm(L) x 450mm(D) x 600mm(H) nos 42,000 2 84,000

Dimesnion: 4200mm(L) x 450mm(D) x 600mm(H) nos 58,800 5 294,000

Dimesnion: 2400mm(L) x 450mm(D) x 600mm(H) nos 33,600 1 33,600

Dimesnion: 4000mm(L) x 450mm(D) x 600mm(H) nos 55,860 1 55,860

Dimesnion: 5000mm(L) x 450mm(D) x 600mm(H) nos 69,720 1 69,720

Supplying, and placing in position of overhead storage @ 600mm height as per photograph. The modular

overhead storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as

well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of

18 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping . The overhead

storage shall be provisioned with openable 4mm thk glass shutters with Handles & locking arrangement with

18mm thk prelam particle board shelf in it. The unit should be complete as per image, and specification under

the guidance of Engineer in charge.

5.4 Main Table for Consultant room Microbiology

Main Table Dimension : 1500mm(L) X 600mm(D) X 750mm(H) 144,000

Overall Side Unit Dimension : 1500mm(L) X 450mm(D) x 750mm(H)

Supplying, and placing in position of main Table as per drawing/image. Modular tables of size 1500mm(L) x

600mm(D) x 750mm(H). The Table top are made out of 25mm thk prelam particle board with 2mm thk pvc edge

banding & side panel & modesty panel are made up of 18mm thick pre-laminated particle board .The working

edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot

temperature. The table have a provision of Side Storage of size 900mm L x 450mm D x 750mm Ht., Storage

Top are made out of 25mm thick pre laminated particle board and rest all storage to be made out of 18 mm

thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC

lipping glued with hot melt EVA glue. Side Storage having a provision of 3 drawer unit of size: 400mm(L) x

450mm(D) x 675mm(H) attached to the side storage top with the help of shiny metal rods. Pedestal Unit have a

combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick

prelaminated Particle board with provision of central Locking arrangement. The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

5.5 Main Chair for Consultant room Microbiology nos 17,300 2 34,600

Supplying and placing in position of 360 degrees Revolving high Back chair of size :- (W)660mm X (D)490mm X

(H)1315mmas per image. The chair have Mesh back with Adjustable Lumbar Support. The breathable mesh

back chair with cushioned fabric seat with moulded foam shall be ergonomically design with Adjustable lumbar

back support .Function: Synchro Single Locking Mechanism.Adjustable Armrest (Up-Down), Adjustable

Headrest(Can Adjust Movement).Sitting on a vaulted chrome base the chair is powered by Nylon Castors.

Maximum Seating Height :560mm.The pneumatic height adjustment shall have adjustment stroke of 100 mm

and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The unit should be

complete as per image, and specification under the guidance of Engineer in charge.

5.6 Visitor Chair for Consultant room Microbiology nos 15,600 4 62,400

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The

breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar

back support . The chair shall be provisioned with adjustable armrest (Up-Down) with PP padding and

Adjustable Headrest(Can Adjust Movement). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303)

upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single

locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five

star chrome base with hooded nylon castors..The pneumatic height adjustment shall have adjustment stroke of

100 mm and shall be operated at 30kgs extension force.The Seat are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

Total Amount Including GST@18% In Rs= 2,021,324

Total Amount Including GST@18% In Rs= 2,021,324

6.0 Academic Block

6.1 Reception Table

Dimension : (L)5200mm X (D)750mm X (H)750mm(all over ht 1050mm) nos 313,600 1 313,600

Supplying, and placing in position of reception Table as per Image/drawing . The Table top made up of 36mm

thick pre-laminated particle board and understructure shall be made of 25mm thick prelaminated particle board

with 2mm thk pvc edge banding . Modesty & side panel shall be 25mm thk prelam particle board with 2mm thk

pvc edge banding . Table top height will be 750mm from the floor level & one additional top at the height of 300

mm above the table top rest on SS stud . overall ht of the table 1050mm. The working edges shall be provided

with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of

Prelam particle board Mobile pedestal of size 400Lx 450Dx600HT (2 drawer + 1filling). Pedestal Top made

out of 18mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated

particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with

hot melt EVA glue. The unit should be complete as per image, and specification under the guidance of Engineer

6.2 Side Storage with Reception Table

Dimension : (L)1500mm X (D)450mm X (H)750mm nos 28,000 2 56,000

Supplying , and placing in position of side storage as per photograph/drawing. The complete storage unit shall be

made up of 18 mm thick prelam particle board with 2mm thk pvc edge banding . The storage shall be

provisioned with shelves and 2 nos compartments .The storage shall have openable shutters with handles and

locking arrangements. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

6.3 Sofa For Waiting Area

3 seater Dimension : (L)1650mm X (D)750mm X (H)710mm nos 66,752 14 934,528

2 seater Dimension(L)1390mm X (D)750mm X (H)710mm nos 53,536 14 749,504

Supplying, and placing in position of sofa as per Image.A supple Camel Brown premium Leatherette upholstery

adds class to the soft cushioned backrest and seating. Sitting proudly on sleek steel legs the sofa exudes a

sense of comfort that is perfect for any space. Material & subtype:Premium Leatherette, Colour & Colour

Family:Brown-Camel Brown, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact,

Style:Modern, Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The

seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. The unit should be complete as per image, and specification under the guidance of Engineer in

6.4 Centre Table For Waiting Area

Dimension:(L)1130mm X (W)630mm X (H)410mm nos 31,360 14 439,040

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

6.5 Side Table For Waiting Area

Dimension(L)680mm X (W)530mmX (H)460mm nos 24,416 14 341,824

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

6.6 Sofa's for Common Room-Boys & Girls

3 seater Dimension (L)1905mm X (D)890mm X (H)870mm nos 71,456 13 928,928

2 seater Dimension (L)1410mm X (D)890mm X (H)870mm nos 56,224 2 112,448

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. . The

Sofa of stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa.

Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown

Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows

along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa

The seat cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. The unit should be complete as per image, and specification under the guidance of Engineer in

6.7 Centre Table For Common Room-Boys

Dimension:(L)1130mm X (W)630mm X (H)410mm nos 31,360 9 282,240

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

6.8 Side Table For Common Room-Boys

Dimension(L)680mm X (W)530mmX (H)460mm nos 24,416 5 122,080

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

6.9 Linear Workstation of Account Office/ Department Office/ Lab room/ Computer Section area

Dimension: 1500mm(L) x 600mm(D) x 1200mm(H) nos 84,400 154 12,997,600

Supplying and placing in position of sliding tile base modular Workstation as per photograph/drawing. Free

standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm

thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims

shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition.

The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have

provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have

adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another

above / below the table top. The complete partitioning work shall be carried out as per the approved drawing.

Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop

shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should

be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges

shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. .

Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. Also a

provision of Mobile Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of 2 drawer &

one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with

provision of handles & central Locking arrangement. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

6.10 L-Shape Workstation of Account Office

Dimension: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) nos 98,784 16 1,580,544

Supplying and placing in position of sliding tile base modular Workstation as per photograph. Free standing

partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.2-1.5mm thick mild

steel. Horizontal and vertical trims are made out of extruded aluminum of 1.2-1.5mm thick. All Panels/trims shall

be powder coated with 50 micron. Aluminum trims are elegantly fixed with hidden connectors on the partition.

The frame work shall be fitted with 8mm thick pre laminated Particle tiles of approved shade. Partition shall have

provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have

adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another

above / below the table top. The complete partitioning work shall be carried out as per the approved drawing.

Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop

shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should

be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges

shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature.

Provision of one PVC keyboard tray and CPU trolley for each seating. Also a provision of Pedestal Unit (size:- L-

400mm x D-450mm x H-600mm) with a combination of 2 drawer & one filing drawer. The pedestal storage unit

shall be made of 18 mm thick prelaminated Particle board with provision of handles & Locking arrangement.

The unit should be complete as per image, and specification under the guidance of Engineer in charge.

6.11 Workstation Chair of Account Office/Department Office/ Lab room nos 17,472 170 2,970,240

Supplying, and placing in position of 360 degree revolving medium mesh back chair as per Image. Styled for

the contemporary office space the chair boasts of a curved backrest with a central console for lower back

support. this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek

chrome vaulted base with its individual prongs powered by nylon castors. A complete executive office chair,

Jordon will bring you comfort like never before. Material & Subtype:Mesh, Dimension:(W)610mm X (D)470mm X

(H)1040mm, Back Type:Medium Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating

Height:1040mm, Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height adjustment::Tilt Tension

adjustment::Synchro tilt Locking:PU adjustable handle : adjustable lumbar support . The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3. The unit should be complete as per image, and specification under the guidance

of Engineer in charge.

6.12 Main Table for Account Officer/ Finance Officer/Library room

Main Table Dimension:(L)1800mm X (D)900mm X (H)750mm

Side Runner Dimension: :(L)1200mm X (D)450mm X (H)750mm

Supplying and placing in position of main Table as per drawing. Modular tables size 1800mm(L) x 900mm(D) x

750mm(H).The Table top made out of 25mm thk prelam particle board with 2mm thk pvc edge banding . The

side panel & modesty panel made up of 18mm thick pre-laminated particle board .The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision

of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-600mm) attached to the table top. Pedestal Unit

have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick

prelaminated Particle board with provision of handles & central Locking arrangement. The table have a

provision of Side Storage of size 1200mm L x 450mm D x 750mm Ht. Storage Top made out of 25mm thick pre

laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board . All

exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.

Storage having provision of 3 drawer unit, one openable shutter, one open storage with handle & central

locking provision. Complete as per image, and specification under the guidance of Engineer in charge.

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

6.13 Side Storage for Account Officer/ Finance Officer

Dimension: :(L)2000mm X (D)450mm X (H)750mm nos 36,960 2 73,920

Supplying, and placing in position of mediumht side storage @ 1200mm height as per photograph/drawing .

storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm

thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm

thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to

be provided with 2 mm thick PVC lipping. Each unit to have openable shutters with locking provision. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

6.14 Main Chair for Account Officer/ Finance Officer/Library room nos 15,904 3 47,712

Supplying and placing in position of 360 degree Revolving High back chair of size(W)620mm X (D)490mm X

(H)1240mmas per image . The chair with arm rest of which seat shall be made up of 12mm thk hot pressed two

pieces plywood upholstered with fabric in front and back in ABS moulded with polyurethene foam. Provision of

tilt tension adjustment,upright locking facility and full 360 degree swivel mechanism . The base should be made

of crome finished and fitted with 5 nos twin wheel castor. The pitch centre diameter of the base along with

castors should bot exceed 660mm, hydralic height adjustment stoke should be 60-80mm and shall be operated

at 30 kg. extension force. Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC

with polyurethane foam, chair seat has foam of density 28-32 kg/m3. The backrest has a foam of 28D. Complete

as per image, and specification under the guidance of Engineer in charge.

6.15 Visitor Chair for Account Officer/ Finance Officer nos 14,112 6 84,672

Supplying, and placing in position of Revolving medium back chair . The chair of size 620mm (W) x 490 (D)x

990mm (H). The chair with arm rest of which seat shall be made up of 12mm thk hot pressed plywood

upholstered with fabric in front and back in ABS moulded with polyurethene foam. Provision of tilt tension

adjustment,upright locking facility and full 360 degree swivel mechanism . The base should be made of crome

finished and fitted with 5 nos twin nylon castor. The pitch centre diameter of the base along with castors should

bot exceed 660mm, hydralic height adjustment stoke should be 60-80mm and shall be operated at 30 kg.

extension force. The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 D. The backrest has a foam of 28D . The unit should

be complete as per image, and specification under the guidance of Engineer in charge.

6.16 Sofa for Account Officer/ Finance Officer/Library room

3 seater Dimension (L)1905mm X (D)890mm X (H)870mm nos 71,456 2 142,912

2 seater Dimension (L)1410mm X (D)890mm X (H)870mm nos 56,224 2 112,448

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. . The

Sofa of stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa.

Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown

Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows

along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa

The seat cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. Complete as per image, and specification under the guidance of Engineer in charge.

6.17 Side Table For Account Officer/ Finance Officer

Dimension(L)680mm X (W)530mmX (H)460mm nos 24,416 2 48,832

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

6.18 Main Table for Director's Office/ Joint Director's Office

Main Table Dimension:(L)2400mm X (D)1130mm X (H)770mm

Side Runner Dimension: :(L)1200mm X (D)600mm X (H)770mm

Supplying, and placing in position of table as per photograph. This precise Durian Boss's Desk is designed with

superb qualityFinish made of engineered wood-medium density fibre board & veneer glossy finish on the same.

Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the

office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The modesty frame of the table

gives the great look with panel upholstered wth PVC material which gives the leatherette look.Main Table top

thkness 80mm , side panel/gable end in 70mm thk mdf with venner glossy finish. Main table and side runner

having a skirting @120mm thk with gives a rich look. The office desk comes with the side runner having enough

storage space.The side runner top with a thickness of 80mm thk that gives the great look . Side table, side

panel, shelves,drawers made up of 18mm thk mdf with venner finish. Table having a provision of Pedestal of

size: 400(L) X 500(D) X 660(H) having three drawers to store essential & undestructure made out of 18mm thk

mdf with venner finish .Drawers have the stylish handle which enhance the look. Material & Subtype:Engineered

Wood - Medium Density Fibre Board, Colour & Colour Family:Red - Cherry.side storage unit having a side

panel, one drawer , one shutter & one shelf of 18mm thk mdf with venner finish. The unit should be complete as

per image, and specification under the guidance of Engineer in charge.

6.19 Main Chair for Director's Office/ Joint Director's Office nos 88,480 2 176,960

Supplying and placing in position of 360 degrees Revolving High Back chair of size :- (W)673mm X (D)508mm X

(H)1270mm ; has soft touch leather, side bolsters and lumbar for maximum support. The chair has resilent

wooden base with hard tread Castors.The armrest of the chair is with fixed support on both side for better

comfort and support. The armrest shall be in Mahogany wood finish. Provision of soft plush thick padded

headrest. Seat and back are made up of 12 - 14 mm thick hot pressed ply wood upholstered with PVC,with

polyurethane foam. The chair having multi locking mechanism with soft touch and ergonomically designed seat

and back for extra comfort. he chair shall have an single locking center tilt mechanism with 17 degree max. tilt

and tilt tension adjustment and full 360 degrees swivel. The one piece arm rest should be made up of solid

designer wood and polished with matching colour. The leather patch fixed on wooden arms. The arm rests are

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

designer wood and polished with matching colour. The leather patch fixed on wooden arms. The arm rests are

fitted to the seat and back with 6mm dia. and 64mm long screw made of HR steel. The prong (base) is made of

wooden and fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong (base) is 700mm pitch

center dia (740mm with castors). The telescopic bellows is 3 piece telescopic type and injection molded in black

polyurethane. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at

30kgs extension force. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

6.20 Visitor Chair for Director's Office/ Joint Director's Office nos 48,608 6 291,648

Supplying and placing in position of 360 degrees Revolving Medium Back chair of size :- (W)660mm X

(D)508mm X (H)1092mm upholstered with soft touch leather upholstery. The ultra soft cushions , side bolsters

and lumbar bolsters for maximum support. The chair shall be provisioned with extra padded wooden mahagony

handles for comfort.Provision of soft touch leather upholstery and ultra soft cushions. The chair has wooden

base with hard tread Castors. The Seat and back are made up of 14 mm thick hot pressed ply wood upholstered

with PVC,with polyurethane foam. The chair having soft touch and ergonomically designed seat and back for

extra comfort. Chair seat has foam of density 45 (+/-2kg /m3) . The backrest has a foam of 28 (+/-2kg /m3).

Complete as per image, and specification under the guidance of Engineer in charge.

6.21 Sofa for Director's Office/ Joint Director's Office

3 seater Dimension (L) 2020mm x (D) 905mm x (H) 850mm nos 97,216 4 388,864

Supplying, and placing in position of sofa as per photograph.This sofa is constructed with a combination of solid

wood and ply along with zig zag springs to give a sturdy and durable stance. Top grain Italian Leatherette

upholstery. Solid German Beech Wood Frame,Sleek wooden legs.Seating Height :495mm, Legs: Solid

Wood..The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating cushion have 2.75 &

1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest

has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery

wrinke free & soft. The unit should be complete as per image, and specification under the guidance of Engineer

6.22 Centre Table for Director's Office/ Joint Director's Office

Dimension (L) 1070mm X (D) 550mm X (H) 350mm nos 36,960 2 73,920

Supplying, and placing in position of centre Table as per photograph. The centre table is a combination of wood

and glass for an elegant look.Table top made with 12mmthk Tempered Glass with Clear Glass Finish. Made out

of Engineered wood base with Warm Wooden Paper Finish. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

6.23 Side Table for Director's Office/ Joint Director's Office

Dimension (L) 400mm X (D) 400mm X (H) 500mm nos 23,296 4 93,184

Supplying, and placing in position of side Table as per photograph. The glass side table is a sleek and functional.

The bent glass allows for multiple open shelf's to keep your magazines.The centre table made with 10mm Bent

Glass with Clear Finish Legs made out of Beech wood. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

6.24 PS Main table for Director's Office/ Joint Director's Office

Main Table Dimension: 1800mm(L) X 750mm(d) x 750mm(h)

Side Runner Dimension: 1200mm(L) X 400mm(d) x 750mm(h)

Providing and placing of table as per drawing. Modular tables size 1800mm(L) x 750mm(D) x 750mm(H). Table

top made up of 25mm thick pre-laminated particle board and understructure shall be made of 18mm thick

prelaminated particle board gable ends and modesty panels. The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of 3 drawer mobile

pedestal, one CPU trolley and PVC keyboard tray attached to the table top. The table shall be provisioned with

free standing Side Storage of size 1200mm L x 400mm D x 750mm Ht., Storage Top made out of 25mm thick

pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board .

Storage having a openable shutter with handles and central locking arrangement. All exposed edges shall be

provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The unit should be

complete as per image, and specification under the guidance of Engineer in charge.

6.25 PS Main Chair for Director's Office/ Joint Director's Office nos 18,592 2 37,184

Supplying, and placing in position of 360 degree revolving high mesh back chair as per Image. Styled for the

contemporary office space the chair boasts of a curved backrest with a central console for lower back support.

this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek chrome

vaulted base with its individual prongs powered by nylon castors. A complete executive office chair, Jordon will

bring you comfort like never before. Material & Subtype:Mesh, Colour & Colour Family:Black

Dimension(W)640mm X (D)480mm X (H)1240mm, Back Type:High Back, Base:Chrome Base, Base

Type:Revolving, Maximum Seating Height:1240mm, Minimum Seat Height:1140mm, Function-

Revolving::Pneumatic Height adjustment::Tilt Tension adjustment::Synchro tilt locking: PU adjustable handle :

adjustable lumbar support .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with

PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3 . The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

6.26 PS Visitor Chair for Director's Office/ Joint Director's Office nos 17,472 4 69,888

Supplying, and placing in position of 360 degree revolving medium mesh back chair as per Image. Styled for

the contemporary office space the chair boasts of a curved backrest with a central console for lower back

support. this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek

chrome vaulted base with its individual prongs powered by nylon castors. A complete executive office chair,

Jordon will bring you comfort like never before. Material & Subtype:Mesh, Dimension:(W)610mm X (D)470mm X

(H)1040mm, Back Type:Medium Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating

Height:1040mm, Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height adjustment::Tilt Tension

adjustment::Synchro tilt Locking:PU adjustable handle : adjustable lumbar support . The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3. The unit should be complete as per image, and specification under the guidance

of Engineer in charge.

6.27 PS Side Storage for Director's Office/ Joint Director's Office

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Dimension: :(L)4000mm X (D)450mm X (H)750mm nos 74,480 2 148,960

Supplying , and placing in position of storage as per photograph/drawing. The complete storage unit shall be

made up of 18 mm thick prelam particle board with 2mm thk pvc edge banding . The storage shall be

provisioned with shelves and 2 nos compartments .The storage shall have openable shutters with handles and

locking arrangements. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

6.28 Linear Workstation for PS Director's Office/ PS Joint Director's Office/ Security room

Dimension: 1200mm(L) x 600mm(D) x 1200mm(H) nos 77,168 6 463,008

Supplying and placing in position of sliding tile base modular Workstation as per photograph/drawing. Free

standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm

thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims

shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition.

The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have

provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have

adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another

above / below the table top. The complete partitioning work shall be carried out as per the approved drawing.

Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop

shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should

be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges

shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. .

Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. Also a

provision of Mobile Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of 2 drawer &

one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with

provision of handles & central Locking arrangement. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

6.29 Workstation Chair for Director's Office/ PS Joint Director's Office nos 17,472 6 104,832

Supplying, and placing in position of 360 degree revolving medium mesh back chair as per Image. Styled for

the contemporary office space the chair boasts of a curved backrest with a central console for lower back

support. this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek

chrome vaulted base with its individual prongs powered by nylon castors. A complete executive office chair,

Jordon will bring you comfort like never before. Material & Subtype:Mesh, Dimension:(W)610mm X (D)470mm X

(H)1040mm, Back Type:Medium Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating

Height:1040mm, Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height adjustment::Tilt Tension

adjustment::Synchro tilt Locking:PU adjustable handle : adjustable lumbar support . The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3. The unit should be complete as per image, and specification under the guidance

of Engineer in charge.

6.30 Conference Table (28 seater)

Dimension:9000mm (L )x 600mm(D) x 750mm(H) (all over depth 2550) nos 918,400 1 918,400

Supplying, and placing in position of Conference Table as per image/drawing. The modular Conference table top

shall be made out of 42mm thick prelmainated particle board with 2mm thk pvc edge banding. The table shall

be supported with combination of 36mm thick prelam particle board side panels and 25mm thick Prelam

particle board modesty panels with 2mm thk pvc edge banding. All exposed edges shall be provided with

matching edge finish . The cnference table having a provision of wire carrier should Made from 0.6mm thick

CRCA & powder coated 40-50 microns . Also a Provision of flip top box for wire management and raceway

under the table top for wires flow. The unit should be complete as per image, and specification under the

guidance of Engineer in charge.

6.31 Main Chair for Conference room nos 28,784 2 57,568

Supplying and placing in position of 360 degrees revolving high back chair as per photograph. The chair of Size

:-(W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar

back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte

and cut foam. The leatherette upholstery in the chair has the

look and feel of top grain leather. The chrome plated loop armrest with padded upholstery is provided for extra

comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm

. Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions The

backrest has a foam of 28kg/m3. The unit should be complete as per image, and specification under the

guidance of Engineer in charge.

6.32 Visitor Chair for Conference room nos 24,528 26 637,728

Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The Craze

chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design

contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered

with leatheritte and cut foam. The leatherette upholstery in the chair has the look and feel of top grain leather.

The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be

provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base

with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) The backrest has a foam of 28kg/m3.

The unit should be complete as per image, and specification under the guidance of Engineer in charge.

6.33 Visitor Chair for Conference room (along the wall) nos 22,848 22 502,656

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X

(H)990mmas per Image.A contemporary design with an all black finish, the chair is a staple in every office

setting. A double padded cushion encased in an all black premium leatherette makes for one comfy seat. The

side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple

formats to suit your individual needs. Material & subtype:Premium Leatherette, Colour & Colour Family:Black,

Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever Frame, Base

Type:Cantilever, Maximum Seating Height:19".The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a

foam of 28kg/m3. The unit should be complete as per image, and specification under the guidance of Engineer

6.34 Main Table for Committee Room (18 seater)

Dimension(L)6000mm X (D)600mm X (H)750mm (overall depth: 3000mm) nos 462,112 1 462,112

Dimension(L)3000mm X (D)600mm X (H)750mm (overall depth: 3000mm) nos 380,800 2 761,600

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying and placing committee table as per image. The work surface top should be of thickness 45mm top

prelaminated particle board with 2mm thick PVC edge banding. The side panel made up of 36mm thick

prelaminated particle & modesty panel made out of 25mm thick prelaminated particle board with 2mm thick

PVC edge banding. The legs of the table should be made from 36mm prelaminated particle board with 2mm

thick PVC edge banding. The wire carrier should Made from 0.6mm thick CRCA & powder coated 40-50

microns. Also provision of flip top box (4nos) & metal raceway for wire flow. The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

6.35 Main Chair for Committee Room nos 32,816 2 65,632

Supplying, and placing in position of 360 degree revolving High back chair as per Image. This contemporary

chair comprises of luxurious double padding cushion with a central indent that provides lower back support for

proper posture and comfort. The central panel in the backrest is neatly stitched with a soft seat cushion finished

in the same black leatherette. The Chair nestles on a shiny chrome vaulted base with nylon castors. the shiny

armrests come adeptly padded for comfort. Material & Subtype:Leatherette, Colour & Colour Family:Black

,Dimension(W)625mm X (D)490mm X (H)1210mm, Back Type:High Back, Base:Chrome Base, Base

Type:Revolving, Maximum Seating Height:25", Minimum Seat Height:21.25",Function: Revolving::Pneumatic

Height Lift::Tilt Tension Control::Centre Tilt, Locking Mechanism:Centre Tilt. The pneumatic height adjustment

shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back are

made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam

of density 32-35 kg/m3 . The backrest has a foam of 28kg/m3. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

6.36 Visitor Chair for Committee Room nos 29,008 48 1,392,384

Supplying, and placing in position of 360 degree revolving medium back chair as per Image. A contemporary

design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in

an all black premium leatherette makes for one comfy seat. The side padding and the headrest sit snugly

providing added lumbar support to the user. Material & subtype:Premium Leatherette, Colour & Colour

Family:Black, Dimension(W)625mm X (D)490mm X (H)1135mm, Back Type:medium back,

Base:Chrome Base, Maximum Seating Height:19",Finish:Matte.The pneumatic height adjustment shall have

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back are made up of

12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-

35 kg/m3. The backrest has a foam of 28kg/m3. The unit should be complete as per image, and specification

under the guidance of Engineer in charge.

6.37 Meeting Table (14 seater)

Dimension(L)5000mm X (D)1500mm X (H)750mm nos 278,768 1 278,768

Supplying, and placing in position of meeting table as per image/drawing.The Table top made out of 25mm thk

prelam particle board with 2mm thk pvc edge banding with ms powder coated "C" shape legs (50mm x 50mm).

Comprising of metal powder coated cross connectors (40mm X40mm).Providing metal wire raceway & junction

box/snake pole for connectivity of wires & cables. Also having a provision of 6module fliptop box . The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

6.38 Meeting Main Chair nos 18,032 2 36,064

Supplying, and placing in position of 360 degree revloving high back chair as per Image. The high mesh back

chair is a magnificient chair with creative tree detailing, so when you look at it from afar it feels as if a tree is

emerging from the roots to the branches and leaves on the top. The leaves add function to the design being

adjustable for improved lumbar support. The chair with adjustable headrest & armrests. Material & Subtype:

Mesh, Colour & Colour Family: Black, Dimension(W)600mm X (D)500mm X (H)1282mm, Back Type:high Back,

Base:Aluminium Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum Seat Height:17.32",

Function: Revolving::Pneumatic Height Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable Armrest, 3 D Lumbar

Support,Locking Mechanism: self tention adjustment/any position multi locking, chair Handle: adjustable handle

with pp pad . The Seat are made up of 12mm thk hot pressed plywood upholstered with moulded foam and

fabric, chair seat has foam of density 32-35 kg/m3. The unit should be complete as per image, and specification

under the guidance of Engineer in charge.

6.39 Meeting Visitor Chair nos 16,464 12 197,568

Supplying, and placing in position of 360 degree revloving medium back chair as per Image. The medium

mesh back chair is a magnificient chair with creative tree detailing, so when you look at it from afar it feels as if a

tree is emerging from the roots to the branches and leaves on the top. The leaves add function to the design

being adjustable for improved lumbar support. The chair with adjustable armrests.Material & Subtype: Mesh,

Colour & Colour Family: Black, Dimension(W)600mm X (D)500mm X (H)1090mm, Back Type:Medium Back,

Base:Aluminium Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum Seat Height:17.32",

Function: Revolving::Pneumatic Height Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable, Armrest, 3 D Lumbar

Support,Locking Mechanism: self tention adjustment/any position multi locking, chair Handle: adjustable handle

with pp pad . The Seat are made up of 12mm thk hot pressed plywood upholstered with moulded foam and

fabric, chair seat has foam of density 32-35 kg/m3. certification. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

6.40 Main Table for HOD room/ Associate Room/Department Office

Main Table Dimesnion: (L)1800mm X (D)900mm X (H)750mm

All over Side Runner Dimension: (L)2100mm X (D)450mm X (H)650mm

Supplying, and placing in position of a straight line table with wire manager as per photograph/drawing. The main

desk of size 1800mm (L) X 900mm (D) X 750mm (H) shall be made out of 42mm thick pre laminated particle

board with the approved shade. Table top supported with side panels and modesty panel. The side panels made

out of 42mm thick pre laminated Particle board & modesty panel made out of 36mm thk pre laminated

Particle board of approved shade. All working or non working edges shall be provided with machine pressed

2mm thick PVC edging using special hot melt glue at hot temperature. Provision of Pop-up - cable manager

box in the table .The Fixed Side Runner attached to the table of all over size 2100mm (L) x 450mm (D) x

650mm (H) has a provision for three drawer with locking facility , two openable shutters with locking

arrangement , open storage with shelf & one open storage for cpu.The another side panel of table top having a

provision of two attached drawer as per photograph. The table top rest on SS studs for design purpose same as

per image. The unit should be complete as per image, and specification under the guidance of Engineer in

6.41 Main Chair for HOD room / Associate Room/Department Office nos 39,200 51 1,999,200

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying, and placing in position of 360 degree revloving high back chair as per Image.The premium upholstery

is an added touch of extra class. With its supple leather upholstery. Equipped with a multi-locking knee tilt

mechanism and adjustable arms this chair is is high on back support and comfort.Size: (W)610mm X (D)500mm

X (H)1300mm Leather: Semi Aniline Leather, Function: Revolving::Pneumatic Height Lift::Adjustable

Armrest::Multilocking Knee Tilt, Maximum Seating Height: 24",Minimum Seat Height: 20.86", Base :Chrome

Base, Locking Mechanism: Multi-Locking Knee Tilt.The pneumatic height adjustment shall have adjustment

stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot

pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 30-32 kg/m3.

The unit should be complete as per image, and specification under the guidance of Engineer in charge.

6.42 Visitor Chair for HOD room/ Associate Room/Department Office nos 38,304 102 3,907,008

Supplying, and placing in position of 360 degree revloving medium back chair as per Image. The premium

upholstery is an added touch of extra class. With its supple leather upholstery. Equipped with a multi-locking

knee tilt mechanism and adjustable arms this chair is is high on back support and comfort.t.Dimension

(W)640mm X (D)500mm X (H)1130mm, Leather: Semi Aniline Leather, Function: Revolving::Pneumatic Height

Lift::Adjustable Armrest::Multilocking Knee Tilt, Maximum Seating Height: 24",Minimum Seat Height: 20.86",

Base :Chrome Base, Locking Mechanism: Multi-Locking Knee Tilt.The pneumatic height adjustment shall have

adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm

thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 30-

32kg/m3. The unit should be complete as per image, and specification under the guidance of Engineer in

6.43 Sofa for HOD room

3 seater Dimension (L)1905mm X (D)890mm X (H)870mm nos 71,456 15 1,071,840

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves, Berry

is the finest piece of furniture we have made. The Sofaof stands Firm on solid PVC legs with thick armrests

that are slightly curved on the front face of the sofa. Each curve defines a seating space which provides for

people to be seated comfortably. Finished in a Brown Nappa Aire Leather, the sofa makes a fantastic first

impression. The Cushioning is molded such that it flows along the partition for a clean unified look. steam beech

solid wood have used for framing construction of sofaThe seat cushion is made of multi layered foam of

density 35-38kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon

bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of

200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. Complete as per image, and

specification under the guidance of Engineer in charge.

6.44 Main table for HOD PS

Dimension: 1200mm(L) X 600mm(D) X 750mm(H) nos 45,920 14 642,880

Supplying, and placing in position of Free standing table as per Image/drawing. The table top made up of 25mm

thick pre-laminated particle board with 2mm thk pvc edge banding . The Table supported with 18mm thk Prelam

Particle board side panel & Modesty panel. The working edges shall be provided with machine pressed 2mm

thick PVC edging using special hot melt glue at hot temperature. Provision of one fixed Pedestal storage unit

(combination of two drawers and one filing drawer) . Pedstal Unit made of 18mm thk prelaminated particle board

with 2mm thk pvc edge banding.Also having a provision of pvc keyboard tray & metal cpu trolley. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

6.45 Main Chair for HOD PS nos 18,592 14 260,288

Supplying, and placing in position of 360 degree revolving high back mesh chair as per Image. Styled for the

contemporary office space the chair boasts of a curved backrest with a central console for lower back support.

this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek chrome

vaulted base with its individual prongs powered by nylon castors. Material & Subtype:Mesh, Colour & Colour

Family:Black Dimension(W)640mm X (D)480mm X (H)1240mm, Back Type:High Back, Base:Chrome Base,

Base Type:Revolving, Maximum Seating Height:1240mm, Minimum Seat Height:1140mm, Function-

Revolving::Pneumatic Height adjustment::Tilt Tension adjustment::Synchro tilt locking: PU adjustable handle :

adjustable lumbar support .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with

PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3 . The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

6.46 Visitor Chair for HOD PS nos 17,472 14 244,608

Supplying, and placing in position of 360 degree revolving medium mesh back chair as per Image. Styled for

the contemporary office space the chair boasts of a curved backrest with a central console for lower back

support. this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek

chrome vaulted base with its individual prongs powered by nylon castors. A complete executive office chair,

Jordon will bring you comfort like never before. Material & Subtype:Mesh, Dimension:(W)610mm X (D)470mm X

(H)1040mm, Back Type:Medium Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating

Height:1040mm, Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height adjustment::Tilt Tension

adjustment::Synchro tilt Locking:PU adjustable handle : adjustable lumbar support . The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

6.47 Main Table for Assistant Professor

Main Table Dimension: 1600mm (L) X 850mm (D) x 760mm(H)

All over Side Runner Dimension: 2220mm (L) X 400mm (D) x 660mm(H)

Supplying and placing in position of main table as per photograph. The main desk overall size 1800mm (L) X

2200mm (D) including length of side table X 760mm (H) for main table and 660mm for side unit. The table top

and side panels shall be made out of 70- 80mm thick MDF board including with 0.5mm laminate with glossy

finish and, leatherette attached on table top for extra comfort or looks, laminate MDF with glossy finish. The desk

table top carries a leatherite folio with an inbuilt wire management system for easy access. Front Modesty panel

shall be made out of 09-25mm thick. Provision of one mobile pedestal with two sliding drawers matching with

table top. Coupled with the desk is a movable runner, having a provision for one shutter either sides, one

drawer at bottom side, one key board and one open shelf for CPU storage. Side unit top shall be made out of

25-30mm thick MDF board including 0.5mm laminate with glossy finish. The under structure shall be made out

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

25-30mm thick MDF board including 0.5mm laminate with glossy finish. The under structure shall be made out

of 9-18mm thick 0.5mm laminate with glossy finish MDF board. Table shall have one separate independent

mobile pedestal with two sliding drawers. Pedestal sides, front and bottom shall be made out of 16mm thick

MDF board. Drawers bottom and backing of the pedestal should be 6-9mm thick MDF board. Pedestal shall

have a combination of 2 drawers. Drawers shall be in MDF board with 0.5mm laminate with glossy finish

matching with table. The pedestal shall be movable on lockable castors.The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

6.48 Main Chair for Assistant Professor nos 18,592 28 520,576

Supplying, and placing in position of 360 degree revolving high mesh back chair as per Image. Styled for the

contemporary office space the chair boasts of a curved backrest with a central console for lower back support.

this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek chrome

vaulted base with its individual prongs powered by nylon castors. A complete executive office chair, Jordon will

bring you comfort like never before. Material & Subtype:Mesh, Colour & Colour Family:Black

Dimension(W)640mm X (D)480mm X (H)1240mm, Back Type:High Back, Base:Chrome Base, Base

Type:Revolving, Maximum Seating Height:1240mm, Minimum Seat Height:1140mm, Function-

Revolving::Pneumatic Height adjustment::Tilt Tension adjustment::Synchro tilt locking: PU adjustable handle :

adjustable lumbar support .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with

PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3 . The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

6.49 Visitor Chair for Assistant Professor nos 17,472 56 978,432

Supplying, and placing in position of 360 degree revolving medium mesh back chair as per Image. Styled for

the contemporary office space the chair boasts of a curved backrest with a central console for lower back

support. this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek

chrome vaulted base with its individual prongs powered by nylon castors. A complete executive office chair,

Jordon will bring you comfort like never before. Material & Subtype:Mesh, Dimension:(W)610mm X (D)470mm X

(H)1040mm, Back Type:Medium Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating

Height:1040mm, Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height adjustment::Tilt Tension

adjustment::Synchro tilt Locking:PU adjustable handle : adjustable lumbar support . The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3. Complete as per image, and specification under the guidance of Engineer in

6.50 Main Chair for Seminar room nos 32,816 33 1,082,928

Supplying, and placing in position of 360 degree revolving High back chair as per Image. This contemporary

chair comprises of luxurious double padding cushion with a central indent that provides lower back support for

proper posture and comfort. The central panel in the backrest is neatly stitched with a soft seat cushion finished

in the same black leatherette. The Chair nestles on a shiny chrome vaulted base with nylon castors. the shiny

armrests come adeptly padded for comfort. Material & Subtype:Leatherette, Colour & Colour Family:Black

,Dimension(W)625mm X (D)490mm X (H)1210mm, Back Type:High Back, Base:Chrome Base, Base

Type:Revolving, Maximum Seating Height:25", Minimum Seat Height:21.25",Function: Revolving::Pneumatic

Height Lift::Tilt Tension Control::Centre Tilt, Locking Mechanism:Centre Tilt. The pneumatic height adjustment

shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back are

made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam

of density 32-35 kg/m3 . The backrest has a foam of 28kg/m3. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

6.51 Table for Seminar Room

Dimension: 3400mm (L) X 600mm (D) x 750mm (H) nos 107,520 27 2,903,040

Dimension: 2700mm (L) X 600mm (D) x 750mm (H) nos 96,320 6 577,920

Dimension: 2000mm (L) X 600mm (D) x 750mm (H) nos 84,000 14 1,176,000

Supplying and placing in position of seminar table as per image. The Table top made out of 25mm thk

Prelaminated particle board with 2mm thk pvc edge banding. Modesty panel made out of 18mm thk prelaminted

particle board with 2mm thk pvc edge banding fixed below the table top . Table top supported with MS powder

coated Square leg of 50mm x 50 mm thk with horizontal connector 40mm x 40mm thk to support the table top.

Also having a provision of wire raceway (100mm(H), 150mm(D) & junction box for wire passing. The working

and non working edges shall be finished with machine pressed with 2mm PVC edge banding. Complete as per

image, and specification under the guidance of Engineer in charge.

6.52 Chair for Seminar Room nos 9,408 203 1,909,824

Supplying and placing in Position of stackable chair as per Image. The chair of size :- (W)500mm X (D)530mm X

(H)840mm is a curious one. The block panelled back and waterfall seat cushions make this chair a classy

addition to the workspace. An all metal construction with an exposed chrome frame gives it a sleek look.The

Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 30-32kg/m3. The backrest has a foam of 28kg/m3 The unit should be complete

as per image, and specification under the guidance of Engineer in charge.

6.53 Demo/ Library/ Lab/ Reading/ Faculty Reading Table

Dimension: 3000mm (L) X 750mm (D) x 750mm (H) nos 72,800 5 364,000

Dimension: 2400mm (L) X 750mm (D) x 750mm (H) nos 54,768 8 438,144

Dimension: 2100mm (L) X 750mm (D) x 750mm (H) nos 44,576 34 1,515,584

Dimension: 1800mm (L) X 750mm (D) x 750mm (H) nos 41,319 4 165,276

Dimension: 2200mm (L) X 1200mm (D) x 750mm (H) nos 47,040 8 376,320

Supplying and placing in Position of library table as per Image.Table Top made out of 25mm Thk Prelam particle

board with 2mm PVC Edge Banding on all Exposed edges.Table top supported on Mild Steel 50mm x50mm

Slanted Leg with 50mm x 25mm Horizontal connectors with Powder coating of 50 Micron. Middle Leg :- 0.8 mm

thk Metal panel fixed on both side of the "T" leg for Vertical wire carrying purpose & 0.8 mm thk Single/Double

metal powder coated raceway with Powder coating of 50 Micron below top for wiring.Provision of Vertical wire

carrying pole with powder coating 50 micron below the top for wiring.The unit should be complete as per image,

and specification under the guidance of Engineer in charge.

6.54 Demo/ Library/ Lab/ Reading/ Faculty Reading Chair nos 9,632 208 2,003,456

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying and placing in position of chair as per image.This chair is designed as a split seat with a plush

backrest and a soft seat. The seat frame is constructed using sleek chrome with rich black leatherette upholstery

in stark contrast on the seat cushions. The tufted design on the seat and back adds to its style making this a

perfect visitors chair.Material & subtype: Premium Leatherette, Colour & Colour Family: Black, Dimension:

(W)470mm X (D)400mm X (H)890mm, Back Type:Low Back, Base:Four Leg Metal Frame, Base Type: Fixed,

Maximum Seating Height: 19.29", Finish:Matte.The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 30-32kg/m3 D. The backrest has a

foam of 28D . The unit should be complete as per image, and specification under the guidance of Engineer in

6.55 Book Rack for Faculty Reading room/ Library Room/ Department office

Dimension:: 900mm(L) x 300mm(D) x 1800mm(H) nos 40,320 81 3,265,920

Supplying and placing in position of book rack of size: 900mm(L) x 300mm(D) x 1800mm(H)

as per photograph/drawing. The book rack have a provision of shelves for the storage

provision . The complete structure made up of 25mm thick prelaminated partical board

with all exposed edges to be provided with 2 mm thick PVC edging. The book rack unit

should have all shelves with uniformally distributed load capacity 20 kg (max.) for each

shelf & each shelf having a provision of stiffner.The unit should be complete as per image, and specification

under the guidance of Engineer in charge.

6.56 Canteen Table

Dimension: 1200mm(Dia) X 750mm (H) nos 22,176 22 487,872

Supplying, and placing in position of canteen table of size: Dia 1200mm x 750mm(H) as per image/drawing .

The table made out of 25mm thk Prelam mdf board with 2mm thk Pvc edge banding.Table top supported with

MS powder coated pole. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

6.57 Canteen Chair nos 5,200 88 457,600

Supplying and placing stackable Cafeteria Chair of Size: (L)406mm X (D)406mm X (H)762mm as per image.

The chair shall be Wooden Seat with SS 202 grade 16 Gauge heavy frame in 25.4mm. The unit should be

complete as per image, and specification under the guidance of Engineer in charge.

Supplying, and placing in position of Bar stool as per Image.The seat and back are a single shell with slender

designer legs and a footrest to complete the design.Back rests provide good back support and extra comfort so

if you are likely to be sitting on them for any length of time these are certainly recommended.Material &

Subtype:Solid Wood, Colour & Colour Family:Brown Wenge,Dimension:(L)380mm X (D)390mm X (H)900mm,

Legs:Solid Wood,Finish:Glossy.The unit should be complete as per image, and specification under the guidance

of Engineer in charge.

6.59 Full Height Storages

Dimension: 1000mm(L) X 450mm (D) X 1800mm(H) nos 44,352 81 3,592,512

Supplying, and placing in position of full height storage as per photograph/drawing. storage unit having

Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated

particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated

particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2

mm thick PVC lipping. Each unit to have openable shutters with locking provision. Complete as per image, and

specification under the guidance of Engineer in charge.

6.60 Lecture Hall Table

Lecture hall Table Section - D - Desk Only

Dimension: (L) 6750mm x (D) 450mm x (H) 850mm, minimum length for 2 person seating should be 1350mm nos 10 240,000

Providing and fixing of desk are made out of 25mm thk one side prelam mdf on top, modesty & sides at

regular intervals fixed on the angular ms powder coated frame/pipe of size: 40mm x 40mm x 1.5mm thk. The

MS powder coated framing/pipe shall be grout to the flooring including necessary all fittnigs. The unit should be

complete as per image, and specification under the guidance of Engineer in charge.

6.61 Lecture hall Table Section - E - Desk , Seat & Back

Over all Dimension: (L) 6750mm x (D) 1000mm x (H) 850mm,

seating dimension: (L) 6750mm x (D) 550mm x (H) 450mm nos 250,000 60 15,000,000

minimum length for 2 person seating should be 1350mm

Providing and fixing of desk are made out of 25mm thk one side prelam mdf on top, modesty & sides at regular

intervals fixed on the angular ms powder coated frame/pipe of size: 40mm x 40mm x 1.5mm thk. The MS

powder coated framing/pipe shall be grout to the flooring including necessary all fittnigs . The Seat and back to

be cushioned with high density foam of 35kg/m3 and the thickness of foam should be 60mm thk fixed on 12mm

thk ply and fully upholstered with leatherette. The unit should be complete as per image, and specification under

the guidance of Engineer in charge.

6.62 Lecture hall Table Section - F - Seat & Back

Over all Dimension: (L) 6750mm x (D) 550mm x (H) 850mm,

Seating dimension: (L) 6750mm x (D) 550mm x (H) 450mm nos 26,000 10 260,000

minimum length for 2 person seating should be 1350mm

providing and fixing of seat & back cushioned with high density foam of 35kg/m3 and the thickness of foam

should be 60mm fixed on 12mm thk ply and fully upholstered with leatherette at regular intervals fixed on the

angular ms powder coated frame/pipe of size: 40mm x 40mm x 1.5mm thk . The MS powder coated

framing/pipe shall be grout to the flooring including necessary all fittnigs. The unit should be complete as per the

direction of Architect/Engineer-in-charge and drawings. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

6.63 Security Table

Dimension: (L)1500mm X (D)750mm X (H)750mm nos 59,625 1 59,625

Supplying and placing in position of working table as per photograph. The table top are made up of 25mm thick

Prelam partical board with PVC edge banding. The Table top shall be supported with Metal Frame. The modesty

panel are made out of 18mm thk prelam particle board with pvc edge banding. Providing a pedstal of size

400mm(L) x 450mm(D) x 725mm(H) consisting of 1 Drawer + 1 filing cabinet are made up of 18mm thk Prelam

Particle Board with PVC Edge banding with handles & locking arrangement. The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

6.64 Main chair for Security room nos 18,592 1 18,592

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying, and placing in position of 360 degree revolving high mesh back chair as per Image. Styled for the

contemporary office space the chair boasts of a curved backrest with a central console for lower back support.

this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek chrome

vaulted base with its individual prongs powered by nylon castors. A complete executive office chair, Jordon will

bring you comfort like never before. Material & Subtype:Mesh, Colour & Colour Family:Black

Dimension(W)640mm X (D)480mm X (H)1240mm, Back Type:High Back, Base:Chrome Base, Base

Type:Revolving, Maximum Seating Height:1240mm, Minimum Seat Height:1140mm, Function-

Revolving::Pneumatic Height adjustment::Tilt Tension adjustment::Synchro tilt locking: PU adjustable handle :

adjustable lumbar support .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with

PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3 . The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

6.65 Visitor chair for Security room nos 17,472 2 34,944

Supplying, and placing in position of 360 degree revolving medium mesh back chair as per Image. Styled for

the contemporary office space the chair boasts of a curved backrest with a central console for lower back

support. this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek

chrome vaulted base with its individual prongs powered by nylon castors. A complete executive office chair,

Jordon will bring you comfort like never before. Material & Subtype:Mesh, Dimension:(W)610mm X (D)470mm X

(H)1040mm, Back Type:Medium Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating

Height:1040mm, Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height adjustment::Tilt Tension

adjustment::Synchro tilt Locking:PU adjustable handle : adjustable lumbar support . The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

Total Amount Inclusive of GST In Rs= 86,824,709

Total Amount Inclusive of GST In Rs= 86,824,709

7.1 Writing Table for rooms

Dimension:1200mm(W) X 600mm(D) X 750mm(H) nos 32,900 66 2,171,400

Supplying and placing in position of writing table of size 1200(W) X 600(D) X 750(H) with one Drawer. The Table

top are made out of 25mm thick Pre-laminated Particle board with 2mm thk pvc edge banding. side panel,

Modesty panel , Vertical, Drawer of size 400mm (L) X 450MM (D) X 120MM(H) are made out of 18mm thick

Pre-laminated Particle board.All working or non working edges shall be provided with machine pressed 2mm

thick PVC edging using special hot melt glue at hot temperature. Table having leveler provision. The writing

table shall be provisioned with 18mm thk prelam particle board foot rest with pvc edge banding. The writing

table having a provision of open book of size: 1200mm x 400mm x 300mm(H) are made out of 18mm thk prelam

particle board with pvc edge banding. The unit should be complete as per image, and specification under the

guidance of Engineer in charge.

7.2 Writing Chair for rooms nos 9,408 66 620,928

Supplying & Placing in Position of the chair of size :- (W)500mm X (D)530mm X (H)840mm is a curious one. The

modern design is perfect for seating or lounge seating. The block panelled back and waterfall seat cushions

make this chair a classy addition to the workspace. An all metal construction with an exposed chrome frame

gives it a sleek look. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 30-35 kg/m3 .The backrest has a foam of 28D.The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

7.3 Main Table for Warden Room

Main Table Dimension:(L)1800mm X (D)900mm X (H)750mm

Side Runner Dimension: :(L)1200mm X (D)450mm X (H)750mm

Supplying and placing in position of main Table as per drawing. Modular tables size 1800mm(L) x 900mm(D) x

750mm(H).The Table top made out of 25mm thk prelam particle board with 2mm thk pvc edge banding . The

side panel & modesty panel made up of 18mm thick pre-laminated particle board .The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision

of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-600mm) attached to the table top. Pedestal Unit

have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick

prelaminated Particle board with provision of handles & central Locking arrangement. The table have a

provision of Side Storage of size 1200mm L x 450mm D x 750mm Ht. Storage Top made out of 25mm thick pre

laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board . All

exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.

Storage having provision of 3 drawer unit, one openable shutter, one open storage with handle & central

locking provision. The unit should be complete as per image, and specification under the guidance of Engineer

7.4 Main Chair for Warden Room nos 15,904 1 15,904

Supplying and placing in position of 360 degree Revolving High back chair of size(W)620mm X (D)490mm X

(H)1240mmas per image . The chair with arm rest of which seat shall be made up of 12mm thk hot pressed two

pieces plywood upholstered with fabric in front and back in ABS moulded with polyurethene foam. Provision of

tilt tension adjustment,upright locking facility and full 360 degree swivel mechanism . The base should be made

of crome finished and fitted with 5 nos twin wheel castor. The pitch centre diameter of the base along with

castors should bot exceed 660mm, hydralic height adjustment stoke should be 60-80mm and shall be operated

at 30 kg. extension force. Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC

with polyurethane foam, chair seat has foam of density 28-32 kg/m3. The backrest has a foam of 28D. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

7.5 Visitor Chair for Warden Room nos 14,112 2 28,224

Supplying, and placing in position of Revolving medium back chair . The chair of size 620mm (W) x 490 (D)x

990mm (H). The chair with arm rest of which seat shall be made up of 12mm thk hot pressed plywood

upholstered with fabric in front and back in ABS moulded with polyurethene foam. Provision of tilt tension

adjustment,upright locking facility and full 360 degree swivel mechanism . The base should be made of crome

finished and fitted with 5 nos twin nylon castor. The pitch centre diameter of the base along with castors should

bot exceed 660mm, hydralic height adjustment stoke should be 60-80mm and shall be operated at 30 kg.

extension force. The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 D. The backrest has a foam of 28D .The unit should be

complete as per image, and specification under the guidance of Engineer in charge.

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

7.6 Sofa for Rest Room & Drawing room

3 seater Dimension : (L)1650mm X (D)750mm X (H)710mm nos 66,752 2 133,504

1 Seater Dimension(L)850mm X (D)750mm X (H)710mm nos 36,736 2 73,472

Supplying, and placing in position of sofa as per Image.A supple Camel Brown premium Leatherette upholstery

adds class to the soft cushioned backrest and seating. Sitting proudly on sleek steel legs the sofa exudes a

sense of comfort that is perfect for any space. Material & subtype:Premium Leatherette, Colour & Colour

Family:Brown-Camel Brown, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact,

Style:Modern, Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The

seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft.The unit should be complete as per image, and specification under the guidance of Engineer in

7.7 Centre Table for Rest Room & Drawing room

Dimension:(L)1130mm X (W)630mm X (H)410mm nos 31,360 2 62,720

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. ThThe unit should be complete as per image, and

specification under the guidance of Engineer in charge.

7.8 Side Table for Rest Room & Drawing room

Dimension(L)680mm X (W)530mmX (H)460mm nos 24,416 2 48,832

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

7.9 Double bed for Guest Room

Bed Dimension (L)1940mm X (W)2192mm X (H)1050mm 96,096 96,096

Side table Dimension (L)500mm X (D)420mm X (H)450mm 14,336 14,336

Supplying, and placing in position of double bed as per Image. The vast headboard is finished with a beaded

detail inlaid into the frame. The intricate molding coupled with the unique grain finish.Material :Engineered Wood -

Particle Board,Mattress board made of Plywood, Colour & Colour Family Red - Dark Cherry, Dimension

(L)1940mm X (W)2192mm X (H)1050mm, Mechanism: Hydraulic, Seating Height: 360mm. The Nightstand is a

stylish unit that's both smart and functional. The drawers at the bottom keep your valuables safe, unit that can

stand side by side with the bed. The unit should be complete as per image, and specification under the guidance

of Engineer in charge.

Total Amount Inclusive of GST In Rs= 3,392,200

Total Amount Inclusive of GST In Rs= 3,392,200

8.1 Writing Table for rooms

Dimension:90mm(W) X 600mm(D) X 750mm(H) nos 32,900 208 6,843,200

Supplying and placing in position of writing table of size 1200(W) X 600(D) X 750(H) with one Drawer. The Table

top are made out of 25mm thick Pre-laminated Particle board with 2mm thk pvc edge banding. side panel,

Modesty panel , Vertical, Drawer of size 400mm (L) X 450MM (D) X 120MM(H) are made out of 18mm thick

Pre-laminated Particle board.All working or non working edges shall be provided with machine pressed 2mm

thick PVC edging using special hot melt glue at hot temperature. Table having leveler provision. The writing

table shall be provisioned with 18mm thk prelam particle board foot rest with pvc edge banding. The writing

table having a provision of open book of size: 1200mm x 400mm x 300mm(H) are made out of 18mm thk prelam

particle board with pvc edge banding. The unit should be complete as per image, and specification under the

guidance of Engineer in charge.

8.2 Writing Chair for rooms nos 9,408 208 1,956,864

Supplying & Placing in Position of the chair of size :- (W)500mm X (D)530mm X (H)840mm is a curious one. The

modern design is perfect for seating or lounge seating. The block panelled back and waterfall seat cushions

make this chair a classy addition to the workspace. An all metal construction with an exposed chrome frame

gives it a sleek look. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 30-35 kg/m3 .The backrest has a foam of 28D. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

8.3 Main Table for Warden Room/office

Main Table Dimension:(L)1800mm X (D)900mm X (H)750mm

Side Runner Dimension: :(L)1200mm X (D)450mm X (H)750mm

Supplying and placing in position of main Table as per drawing. Modular tables size 1800mm(L) x 900mm(D) x

750mm(H).The Table top made out of 25mm thk prelam particle board with 2mm thk pvc edge banding . The

side panel & modesty panel made up of 18mm thick pre-laminated particle board .The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision

of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-600mm) attached to the table top. Pedestal Unit

have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick

prelaminated Particle board with provision of handles & central Locking arrangement. The table have a

provision of Side Storage of size 1200mm L x 450mm D x 750mm Ht. Storage Top made out of 25mm thick pre

laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board . All

exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.

Storage having provision of 3 drawer unit, one openable shutter, one open storage with handle & central

locking provision. The unit should be complete as per image, and specification under the guidance of Engineer

8.4 Main Chair for Warden Room nos 15,904 4 63,616

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying and placing in position of 360 degree Revolving High back chair of size(W)620mm X (D)490mm X

(H)1240mmas per image . The chair with arm rest of which seat shall be made up of 12mm thk hot pressed two

pieces plywood upholstered with fabric in front and back in ABS moulded with polyurethene foam. Provision of

tilt tension adjustment,upright locking facility and full 360 degree swivel mechanism . The base should be made

of crome finished and fitted with 5 nos twin wheel castor. The pitch centre diameter of the base along with

castors should bot exceed 660mm, hydralic height adjustment stoke should be 60-80mm and shall be operated

at 30 kg. extension force. Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC

with polyurethane foam, chair seat has foam of density 28-32 kg/m3. The backrest has a foam of 28D. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

8.5 Visitor Chair for Warden Room nos 14,112 8 112,896

Supplying, and placing in position of Revolving medium back chair . The chair of size 620mm (W) x 490 (D)x

990mm (H). The chair with arm rest of which seat shall be made up of 12mm thk hot pressed plywood

upholstered with fabric in front and back in ABS moulded with polyurethene foam. Provision of tilt tension

adjustment,upright locking facility and full 360 degree swivel mechanism . The base should be made of crome

finished and fitted with 5 nos twin nylon castor. The pitch centre diameter of the base along with castors should

bot exceed 660mm, hydralic height adjustment stoke should be 60-80mm and shall be operated at 30 kg.

extension force. The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 D. The backrest has a foam of 28D .The unit should be

complete as per image, and specification under the guidance of Engineer in charge.

8.6 Full Height Storages

Dimension: 1700mm(L) X 450mm (D) X 1800mm(H) nos 75,264 4 301,056

Supplying, and placing in position of full height storage as per photograph/drawing. Storage unit having

Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated

particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated

particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2

mm thick PVC lipping. Each unit to have openable shutters with locking provision.The unit should be complete as

per image, and specification under the guidance of Engineer in charge.

8.7 Double bed for Guest Room

Bed Dimension (L)1940mm X (W)2192mm X (H)1050mm 96,096 2 192,192

Side table Dimension (L)500mm X (D)420mm X (H)450mm 14,336 2 28,672

Supplying, and placing in position of double bed as per Image. The vast headboard is finished with a beaded

detail inlaid into the frame. The intricate molding coupled with the unique grain finish.Material :Engineered Wood -

Particle Board,Mattress board made of Plywood, Colour & Colour Family Red - Dark Cherry, Dimension

(L)1940mm X (W)2192mm X (H)1050mm, Mechanism: Hydraulic, Seating Height: 360mm. The Nightstand is a

stylish unit that's both smart and functional. The drawers at the bottom keep your valuables safe, unit that can

stand side by side with the bed. The unit should be complete as per image, and specification under the guidance

of Engineer in charge.

Total Amount Inclusive of GST In Rs= 10,005,632

Total Amount Inclusive of GST In Rs= 10,005,632

9.0 Kitchen and Dinning Block

9.1 Dining Table

Dimension:(L)4100mmX (W)1200mmX (H) 750mm nos 262,080 25 6,552,000

Supplying, and placing in position of dining table as per image/drawing. Table top made out of 25mm thk

prelaminated particle board with 2mm thk pvc edge banding with SS "C" shape legs of size 50mm x 50mm.

Comprising of metal powder coated cross connectors of size 40mm X 40mm . The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision

of granite placed on top. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

9.2 Dining Chair nos 5,200 230 1,196,000

Supplying and placing stackable Cafeteria Chair of Size: (L)406mm X (D)406mm X (H)762mm as per image.

The chair shall be Wooden Seat with SS 202 grade 16 Gauge heavy frame in 25.4mm. The unit should be

complete as per image, and specification under the guidance of Engineer in charge.

9.3 Main Table for Manager Office

Dimension (L)1400mm X (D)680mm X (H)760mm nos 60,256 1 60,256

Supplying, and placing in position of table as per Image.The Desk made out of glossy walnut finish adds value

to the desk's design. Provision of one fixed Pedestal Unit on right side of the table (size:- L-400mm x D-450mm

x H-710mm) with a combination of 2 drawer & one filing drawer and on the other side also having a provision of

storage unit of size (size:- L-400mm x D-450mm x H-710mm) with a combination of one drawer & one openable

shutter . The storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles &

Locking arrangement. The table having a provision of wooden keyboard trayattached to the table top. The unit

should be complete as per image, and specification under the guidance of Engineer in charge.

9.4 Main Chair for Manager Office nos 18,592 1 18,592

Supplying, and placing in position of 360 degree revolving high mesh back chair as per Image. Styled for the

contemporary office space the chair boasts of a curved backrest with a central console for lower back support.

this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek chrome

vaulted base with its individual prongs powered by nylon castors. A complete executive office chair, Jordon will

bring you comfort like never before. Material & Subtype:Mesh, Colour & Colour Family:Black

Dimension(W)640mm X (D)480mm X (H)1240mm, Back Type:High Back, Base:Chrome Base, Base

Type:Revolving, Maximum Seating Height:1240mm, Minimum Seat Height:1140mm, Function-

Revolving::Pneumatic Height adjustment::Tilt Tension adjustment::Synchro tilt locking: PU adjustable handle :

adjustable lumbar support .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with

PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3 .The unit should be complete as per

image, and specification under the guidance of Engineer in charge.

9.5 Visitor Chair for Manager Office nos 17,472 2 34,944

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying, and placing in position of 360 degree revolving medium mesh back chair as per Image. Styled for

the contemporary office space the chair boasts of a curved backrest with a central console for lower back

support. this helps to improve posture and provides comfortable seating all day long. The chair is fixed to a sleek

chrome vaulted base with its individual prongs powered by nylon castors. A complete executive office chair,

Jordon will bring you comfort like never before. Material & Subtype:Mesh, Dimension:(W)610mm X (D)470mm X

(H)1040mm, Back Type:Medium Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating

Height:1040mm, Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height adjustment::Tilt Tension

adjustment::Synchro tilt Locking:PU adjustable handle : adjustable lumbar support . The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3.The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

Total Amount Inclusive of GST Rs= 7,861,792

Total Amount Inclusive of GST Rs= 7,861,792

10.0 Type-2 (Residential Block)

10.1 Sofa for Living room

3 seater Dimension (L)1410mm X (D)890mm X (H)870mm nos 52,400 16 838,400

1 seater Dimension (L)960mm X (D)890mm X (H)870mm nos 37,200 16 595,200

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. The

Sofa stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa.

Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown

Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows

along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa.

The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. The unit should be complete as per image, and specification under the guidance of Engineer in

10.2 Centre Table for Living room

Dimension (L)1130mm X (W)630mm X (H)410mm nos 29,400 16 470,400

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

10.3 Side Table for Living room

Dimension(L)680mm X (W)530mmX (H)460mm nos 22,800 16 364,800

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

10.4 Dining Table for Living room

DT Dimension (L)1500mm X (W)900mm X (H)760mm

DC Dimension (L)485mm X (W)465mm X (H)970mm

Supplying, and placing in position of 6 seater dining table set as per Image. The dining table are made out of

solid wood(steam beach). The rectangular dining table has a polished Veneer top and solid wood construction

finished in Rosewood for a moisture and scratch resistant finish that easy to clean. The stylised legs and

compact design make this an easy fit into any space. Arabian seats six people comfortably. The Arabian Solid

wood table is paired with 6 Pearl Dining Chairs for an elegant dining set. The Chair is made from Solid wood and

has an upholstered seat for added comfort. The unit should be complete as per image, and specification under

the guidance of Engineer in charge.

Total Amount Including GST In Rs= 4,265,600

Total Amount Including GST In Rs= 4,265,600

11.0 Type-3 (Residential Block)

11.1 Sofa for Living room

3 seater Dimension (L)1905mm X (D)890mm X (H)870mm nos 66,400 16 1,062,400

1 seater Dimension (L)960mm X (D)890mm X (H)870mm nos 37,200 16 595,200

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. The

Sofa stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa.

Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown

Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows

along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa.

The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. The unit should be complete as per image, and specification under the guidance of Engineer in

11.2 Centre Table for Living room

Dimension (L)1130mm X (W)630mm X (H)410mm nos 29,400 16 470,400

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

11.3 Side Table for Living room

Dimension(L)680mm X (W)530mmX (H)460mm nos 22,800 16 364,800

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

11.4 Dining Table for Living room (4 seater)

Dimension Of Table (L)900mm X (W)900mm X (H)750mm

Dimension Of Chair (L)550mm X (D)360mm X (H)705mm

Supplying, and placing in position of 4 seater dining table set as per Image. Modern and Contemporary style

make for the alternating blocks of colour inlaid into the glass top. The Compact setup comprises of a table and

four chairs with the chairs retro fitted into their individual alcoves snugly under the table.Comfortably

accommodating 4 diners, this clever dining set is impressively practical as the uniquely shaped chairs simply slot

neatly underneath the table when not in use therefore instantly saving on space The set is made up of soft

purple and black Leatherette chairs that stand on sleek metal legs along with the table. Material:Glass -

Tempered Glass,Legs are in Metal.The unit should be complete as per image, and specification under the

guidance of Engineer in charge.

Total Amount Including GST In Rs= 4,016,000

Total Amount Including GST In Rs= 4,016,000

12.0 Type-4 (Residential Block)

12.1 Sofa for Living room

3 seater Dimension (L)1905mm X (D)890mm X (H)870mm nos 66,400 32 2,124,800

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. The

Sofa stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa.

Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown

Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows

along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa.

The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. The unit should be complete as per image, and specification under the guidance of Engineer in

12.2 Centre Table for Living room

Dimension (L)1130mm X (W)630mm X (H)410mm nos 29,400 16 470,400

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

12.3 Side Table for Living room

Dimension(L)680mm X (W)530mmX (H)460mm nos 22,800 16 364,800

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary.The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

12.4 Dining Table for Living room (6 seater)

DT Dimension (L)1500mm X (W)900mm X (H)760mm

DC Dimension (L)485mm X (W)465mm X (H)970mm

Supplying, and placing in position of 6 seater dining table set as per Image. The dining table are made out of

solid wood(steam beach). The rectangular dining table has a polished Veneer top and solid wood construction

finished in Rosewood for a moisture and scratch resistant finish that easy to clean. The stylised legs and

compact design make this an easy fit into any space. Arabian seats six people comfortably. The Arabian Solid

wood table is paired with 6 Pearl Dining Chairs for an elegant dining set. The Chair is made from Solid wood and

has an upholstered seat for added comfort.The unit should be complete as per image, and specification under

the guidance of Engineer in charge.

Total Amount Including GST In Rs= 4,956,800

Total Amount Including GST In Rs= 4,956,800

13.0 Type-5 (Residential Block)

13.1 Sofa for Living room

3 seater Dimension (L)1905mm X (D)890mm X (H)870mm nos 66,400 24 1,593,600

2 seater Dimension (L)1410mm X (D)890mm X (H)870mm nos 52,400 12 628,800

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. The

Sofa stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa.

Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown

Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows

along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa.

The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has

a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke

free & soft. The unit should be complete as per image, and specification under the guidance of Engineer in

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

13.2 Centre Table for Living room

Dimension (L)1130mm X (W)630mm X (H)410mm nos 29,400 12 352,800

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

13.3 Side Table for Living room

Dimension(L)680mm X (W)530mmX (H)460mm nos 22,800 36 820,800

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

13.4 Dining Table for Living room (6 seater)

DT Dimension (L)1500mm X (W)900mm X (H)760mm

DC Dimension (L)485mm X (W)465mm X (H)970mm

Supplying, and placing in position of 6 seater dining table set as per Image. The dining table are made out of

solid wood(steam beach). The rectangular dining table has a polished Veneer top and solid wood construction

finished in Rosewood for a moisture and scratch resistant finish that easy to clean. The stylised legs and

compact design make this an easy fit into any space. Arabian seats six people comfortably. The Arabian Solid

wood table is paired with 6 Pearl Dining Chairs for an elegant dining set. The Chair is made from Solid wood and

has an upholstered seat for added comfort.The unit should be complete as per image, and specification under

the guidance of Engineer in charge.

Total Amount Including GST In Rs= 4,893,600

Total Amount Including GST In Rs= 4,893,600

14.0 Type-6 (Residential Block)

14.1 Sofa for Living room

L-shape Dimension (L) 2850mm x (D) 2285mm x (H) 915mm nos 173,200 1 173,200

Supplying, and placing in position of L shape sofa as per photograph. The corner console doubles up as an

extra seat or a nifty table top to keep snacks. The kiln-dried solid wood frame provides a perfect Herculean build

making it wrap and scratch resistant. Premium high-density foam is upholstered in premium leatherette that is

easy to clean and maintain. The leatherette upholstery is easy to clean while being stain and fade resistant and

anti-peel. The sofa fascia is bolstered with polished wooden panels to add to its design. Its firm cushions and

mesmerizing chocolate brown finish provide premium comfort. Ribbed panelled back rest with soft padded

armrests are made from kiln-dried solid wood. Material & subtype: Premium Leatherette, Colour & Colour Family

Brown - Chocolate Brown, Seating Height 460mm, Legs Wooden. The seat cushion is made of multi layered

foam of density 35-38kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used

is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer

layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The unit should be complete as

per image, and specification under the guidance of Engineer in charge.

14.2 Sofa for Living room

2 Seater Dimension (L)1590mm x (D)930mm x (H)915mm nos 66,400 1 66,400

BILL OF QUANTITIES

Sr. NO Descriptio of Item Unit (Inclusive Total Qty Amount

Supplying, and placing in position of sofa as per photograph. The kiln-dried solid wood frame provides a perfect

Herculean build making it wrap and scratch resistant. Premium high-density foam is upholstered in premium

leatherette that is easy to clean and maintain. The leatherette upholstery is easy to clean while being stain and

fade resistant and anti-peel. The sofa fascia is bolstered with polished wooden panels to add to its design. Its

firm cushions and mesmerizing chocolate brown finish provide premium comfort. Material & Subtype: Premium

Leatherette, Colour & Colour Family Brown - Chocolate Brown, Seating Height 470mm

Legs PVC, Finish Matte. The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating

cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch

strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill

keeps the upholstery wrinke free & soft. The unit should be complete as per image, and specification under the

guidance of Engineer in charge.

14.3 Centre Table for Living room

Dimension (L)1130mm X (W)630mm X (H)410mm nos 29,400 1 29,400

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam

beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The turned wooden legs are

sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a

focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype:

Solid Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/Base:Solid Wood, Finish:Glossy,Style:Contemporary. The unit should be complete as per image, and

specification under the guidance of Engineer in charge.

14.4 Side Table for Living room

Dimension(L)680mm X (W)530mmX (H)460mm nos 22,800 2 45,600

Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in

pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong

glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The

framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood

( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy,

Style:Contemporary. The unit should be complete as per image, and specification under the guidance of

Engineer in charge.

14.5 Dining Table for Living room (6 seater)

DT Dimension (L)1500mm X (W)900mm X (H)760mm

DC Dimension (L)485mm X (W)465mm X (H)970mm

Supplying, and placing in position of 6 seater dining table set as per Image. The dining table are made out of

solid wood(steam beach). The rectangular dining table has a polished Veneer top and solid wood construction

finished in Rosewood for a moisture and scratch resistant finish that easy to clean. The stylised legs and

compact design make this an easy fit into any space. Arabian seats six people comfortably. The Arabian Solid

wood table is paired with 6 Pearl Dining Chairs for an elegant dining set. The Chair is made from Solid wood and

has an upholstered seat for added comfort.The unit should be complete as per image, and specification under

the guidance of Engineer in charge.

Total Amount Including GST In Rs= 439,400

Total Amount Including GST In Rs= 439,400

GRAND TOTAL AMOUNT IN Rs. = 193,288,763

GRAND TOTAL AMOUNT IN Rs. = 193,288,763

(Rs. Nineteen Crore Thirty Two lakhs Eighty Eight Thousand Seven Hundred Sixty Three Only)

Note:- “The basic feature described in the B.O.Q, photographs, Images, technical specification etc. may be closely matching with any of the

approved makes but slight variation is acceptable in the inherent characteristics, style, design, specification for other approved makes by

treating the B.O.Q nomenclature as generic and common for all makes.”

Clarification of BoQ Itme

NBCC (INDIA) LIMITED

(A GOVT. OF INDIA ENTERPRISE)

Office of Chief General Manager (Engg.),

406, Arun Chambers, Tardeo Main Road, Mumbai- 400 034.

Email: [email protected], [email protected]

Contact: 022 23512016

Ref: NIT NO. SBG/MUMBAI/AIIA/NIT/14/2022 Date: 16.06.2022

Name of the Work: “Supply, Fixing & Installation of Hospital & Residential Buildings

Furniture at All India Institute of Ayurveda at Village- Dhargal in Pernem Taluka, Goa.”

Addendum – 02 is hereby issued to the above NIT and shall form the part of the tender

Clarification of BoQ is hereby uploaded.

All other terms and conditions shall remain same as per NIT.

Chief General Manager (Engg)

SBG West, Mumbai

Digitally signed by

SHUBHAM SHUBHAM GOEL

Ref: NIT NO. SBG/MUMBAI/AIIA/NIT/14/2022 Date: 16.06.2022

Sr. No Clarifications in respect of B.O.Q items of double bed

The item of double bed considered in B.O.Q is inclusive of Six inch thick high density mattress to fit

on the bed along with two nos of standard size pillow covered with organic cotton cover to fit size

1 of mattress and pillows. The core of the mattress will be made of 25 mm thick cool gel memory foam

plus another layer of 100 mm thick flexi P.U. high density foam with top layer composed of a thick

15 mm memory foam layer which again filled at top with 10 mm P.U. high resilience foam thus total

thickness of 150 mm (Six inch).There will be minimum five years warranty from the manufactures

of reputed make duly approved by the Engineer in charge.