Karnataka

AOC

Works

Buildings

Construction of Anganwadi-5 Building at Bandiwad Village in Hubballi Taluk of Dharwad District.

Rural Development and Panchayat Raj Department

RDPR Division Office Daharwad | Karnataka

Amount: ₹10.0 LCloses: 10 Aug 2026Closed

Timeline

Published3 Aug 2026
Closed10 Aug 2026
Awarded—

Bids

1 Bid10 Aug 2026

#	Company	Amount	Status
1	KIRANKUMAR N GANGAVATI ₹8.5 Laccepted-aoc	₹8.5 L	accepted-aoc

Tender Value

₹10.0 L

EMD Value

₹12,500

Closing Date

10 Aug 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

SHRISHAIL MALLIKARJUN HONAKERI

Office Number

Work Description

Construction of Anganwadi-5 Building at Bandiwad Village in Hubballi Taluk of Dharwad District.

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT28007

Reference Number

RDPR/2026-27/BD/WORK_INDENT28007

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Daharwad

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredContractor should upload KPWD renewal registration copy.

RequiredTo qualify for award of this contract each tenderer in his name should have in the last five years period i.e., 2021-22 to 2025-26 Turnover Certificate obtained from Charted Accountant and achieved in at least One financial years a minimum Annual Financial Turnover in all classes of civil Engineering construction works only of Rs. 9,97,494.10 with usually not less than the estimated cost under this contract with UDIN Number.

RequiredIn last five years that is 2021-22 to 2025-26 Satisfactorily completed as a prime contractor for at least one civil work done 25 Percent of the cost of the work i.e., not less than the amount Rs 2.49 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

RequiredLiquid assets and or availability of credit facilities of not less than Rs.2.99 Lakhs i.e., 30 percent of amount put to tender. Credit lines, letter of credit, certificates from Nationalized banks for meeting the fund requirement etc. for particularly this work only. Unconditional in given format.

RequiredThe contractor should scan the GST Certificate

RequiredThe contractor should scan the PAN card& Contact Details

RequiredCalculation sheet of Bidder Capacity AxNX5-B

RequiredOnly contractor belongs to CAT-II A category and resident of Karnataka State for more than 10 years should participate in tender along with caste Certificate and Domicile Certificate issued by competent authority which should be uploaded.

RequiredTenderer should upload address and contact number.

RequiredTenderer should upload CAT-IIA Certificate obtained from competent authority. In attached Formate only.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Contractor should upload KPWD renewal registration copy.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Conditional Tenders will not be accepted.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Division,Dharwad, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module.

Self declaration of machineries are not accepted.

Third party inspection is mandatory for all the works in this programme.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderers own expense.

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only.

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season.

Contractor should obey with the above conditions in addition to the KW-1.

To qualify for award of this contract each tenderer in his name should have in the last five years period (i.e., 2021-22 to 2025-26) Turnover Certificate obtained from Charted Accountant and achieved in at least One financial years a minimum Annual Financial Turnover (in all classes of civil Engineering construction works only) of Rs.9,97,494.10 (usually not less than the estimated cost under this contract.

In last five years (i.e., 2021-22 to 2025-26)Satisfactorily completed as a prime contractor for at least one civil work done 25% of the cost of the work i.e., not less than the amount Rs.2.49 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

Liquid assets and /or availability of credit facilities of not less than Rs.2.99 Lakhs(30% of amount put to tender) (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) for particularly this work only. (Unconditional) in given format

Department of Mines and Geosciences Dated: 25-03-2013 Contractor Should get the Mineral Dispatch permit letter and submit it at the time of bill payment. In case of Non-submission of Mineral Dispatch permit action will be taken to impose a penalty of 5 times the Royalty.

Only contractor belongs to category -II (A) and resident of Karnataka State for more than 10 years should participate in tender along with caste Certificate and Domicile Certificate issued by competent authority which should be uploaded.

Tenderer should upload category -II (A) Certificate obtained from competent authority.in attached Formate only.

Security deposit for an amount equivalent to 5% of the contract price shall be deducted in every running bill. However, in case of 1st & final bill the entire security deposit will be deducted from the final bill.

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extention of time.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹12,500

Important Dates

Last Activity

10 Aug 2026

Published

3 Aug 2026

Download Ends

7 Aug 2026

BOQ Preview

•

Construction of Anganwadi-5 Building at Bandiwad Village in Hubballi Taluk of Dharwad District.

•

Providing and laying in position Cement Concrete for levelling course for

•

all works in foundation. The granite/trap/basalt crushed graded coarse

•

aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Super structures of

•

building , Road works, Water works, Irrigation works & super structure works

•

of bridges upto 3.50 m height. The granite/tra...

•

Providing and laying in position Cement Concrete for all Super structures of

•

building , Road works, Water works, Irrigation works & super structure works

•

of bridges upto 3.50 m height. The granite/tra...

•

Providing and laying in position Cement Concrete for all Super structures of

•

building , Road works, Water works, Irrigation works & super structure works

•

of bridges upto 3.50 m height. The granite/tra...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

•

including cost of all materials, machinery, labour, cleaning, straightening,

•

cutting, bending, hooking, laping/we...

•

Providing Brick work with common burnt clay machine moulded

•

perforated bricks of class designation 5.0 conforming to IS: 2222 in

•

superstructure above plinth level in cement mortar 1:6 (1 cement : 6

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:

•

6 fine sand) including rounding off corners wherever required smooth

•

rendering, providing and removing scaffolding, including cost of m...

•

Providing and applying white cement based putty of average thickness

•

1 mm, of approved brand and manufacturer, over the plastered

•

wall surface to prepare the surface even and smooth complete as per

•

Distempering with oil bound washable distemper of approved brand

•

and manufacture to give an even shade :New work (two coats) over and including

•

water thinnable priming coat with cement primer after th...

•

Finishing walls with water proofing cement paint of required shade :New

•

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

•

thoroughly brooming the surface to remove all dirt, dust, ...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in

•

different sizes with water absorption less than 0.08% and conforming to

•

IS: 15622, of approved make, in all colours and shades, lai...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness

•

to be specified by the manufacturer), of 1st quality conforming to

•

IS : 15622, of approved make, in all colours, shades, e...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory

•

windows, ventilators and other frames, wrought, framed or assembled

•

including making plaster groves (excluding cost of cement concrete a...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters

•

for doors with, stiles and rails of 35mm. thick with bottom and lock rails

•

180mm wide top rail and stiles 100mm wide as per dr...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6

•

mm angle iron and 3 mm M.S. gusset plates at the junctions and

•

corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing M.S. grills of required pattern in frames of windows

•

etc. with M.S. flats, square or round bars etc. including priming coat with

•

approved steel primer all complete. Fixed to steel...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled

•

Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and

•

15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with

•

a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam

•

sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Cudddapah slab 2.5cms thick

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with

•

primer & two coats of acrylic emulsion black paint including finishing

•

Lettering with black Japan paint of approved brand and manufacture to give

•

an even shade including preparing the surface after thoroughly cleaning the

•

surface to remove all dirt, dust and foreign matt...

•

Providing two bulb underreemed pile foundation upto maximum 5m depth including hire charges of machineries digging the pile holes, labour charges and laying 20mm and down size jelly RCC M 20 keeping t...

•

Earth work excavation by manual means for drains, canals, waste weir, draft,

•

approach channels, key trenches, foundation of Buildings & bridges and such

•

simillar works in all kinds of soils, as per dr...

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and

•

down size & with approved sand including hand packing, ramming, watering,

•

including cost of all materials and labour wit...

•

Providing and laying in position Cement Concrete for levelling course for

•

all works in foundation. The granite/trap/basalt crushed graded coarse

•

aggregates and fine aggregates as per relevant IS Codes...

•

Providing Random rubble masonry with hard stone in foundation and

•

plinth including levelling up with cement concrete 1:6:12 (1 cement : 6

•

coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing and laying in position Cement Concrete for all Super structures of

•

building , Road works, Water works, Irrigation works & super structure works

•

of bridges upto 3.50 m height. The granite/tra...

•

Providing and laying in position Cement Concrete for all Super structures of

•

building , Road works, Water works, Irrigation works & super structure works

•

of bridges upto 3.50 m height. The granite/tra...

•

Providing and constructing load bearing wall with Solid Concrete blocks

•

of size 400x150x200mm having block density more than 1800kg/m3

•

and minimum compressive strength of 4.00 N/mm2 conforming to IS

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

•

including cost of all materials, machinery, labour, cleaning, straightening,

•

cutting, bending, hooking, laping/welding joints, tyin...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:

•

6 fine sand) including rounding off corners wherever required smooth

•

rendering, providing and removing scaffolding, including cost of m...

•

Finishing walls with water proofing cement paint of required shade :New

•

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

•

thoroughly brooming the surface to remove all dirt, dust, ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

•

having thermal stability for hot & cold water supply, including all CPVC

•

plain & brass threaded fittings, including fixing the pipe wi...

•

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013

•

with latest amendments ended with integral sockets with ISI mark and

•

conveying to worksite, rolling and lowering into trenches, laying tru...

•

Providing and fixing brass bib cock of approved quality :

•

13.2.1 15 mm nominal bore

•

Providing and placing on terrace (at all floor levels) polyethylene

•

water storage tank, IS : 12701 marked, with cover and suitable locking

•

arrangement and making necessary holes for inlet, outlet and ...

•

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain

•

with rubber plug, 40 mm C.P. brass waste complete, including painting

•

the fittings and brackets, cutting and making good the wall...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan )

•

with 100 mm sand cast Iron P or S trap, 10 litre low level white

•

P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass

•

single hole basin mixer of approved quality and make, including painting

•

of fittings and brackets, cutting and making good the wa...

•

Gully Trap 10cms x 10cms

•

Providing and fixing unplasticised PVC connection pipe with brass unions15 mm nominal bore

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

•

cold water supply including all uPVC plain & brass threaded fittings

•

This includes jointing of pipes & fittings with one step uP...

•

Earth work excavation by manual means for drains, canals, waste weir, draft,

•

approach channels, key trenches, foundation of Buildings & bridges and such

•

simillar works in all kinds of soils, as per dr...

•

Constructing brick masonry chamber of internal dimension 600x450mm

•

and depth of 600mm (inner dimensions) with modular bricks of CD 75

•

in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and laying Reinforced Cement Concrete pipe light duty

•

NP2 for culverts, roadway utilities& crossingsas per IS 458:2003

•

in Single row including pointing ends and fixing collars with

•

ExtraforGroovecuttinginbrickwall/CCfloortothesuitabledepthforconcealingofConduit/GIpipeandplastering,finishinguptowall surface complete.

•

upto 50 mm conduit in brick wall

•

Concealed Conduit System

•

SupplyingheavygaugePVCconduitpipe.mmdia.mmthickconfirmingtoIS2509withsuitablesizebends,metal/PVCJunctionboxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab.Theconduitsho...

•

Point wiring using Copper wire with switch.SupplyingandwiringadoptingloopsysteminexistingPVCConduit/casingcappingusing2x1.5Sqmm(Phase&Neutral)&1x1.0sqmm(Earthwire)FRLSmultistrandPVCinsulatedcopperwire...

•

Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:20101.5 mm2

•

Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 2.5 mm2

•

Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 4sq mm2

•

SupplyingandfixingsheetMetalboxmadeoutof18SWGsheetmetalwithnecessaryholesforcable/conduitentryasrequiredwithonecoat of primer of approved make etc.75 x 75 x 65 mm

•

SupplyingandfixingsheetMetalboxmadeoutof18SWGsheetmetalwithnecessaryholesforcable/conduitentryasrequiredwithonecoat of primer of approved make etc.100 x 75 x 65 mm

•

SupplyingandfixingsheetMetalboxmadeoutof18SWGsheetmetalwithnecessaryholesforcable/conduitentryasrequiredwithonecoat of primer of approved make etc.200 x 90x 65 mm

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.6A One Way Switch

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.6A Three Way socket

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and I400W Dimmer

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.16A One Way Switch

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.32A DP Switch

•

Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross-3withShortcircuitbreakingcapacityof10Kandcompletewiringa...

•

Supplyingof1440rpmheavydutyexhaustfanwithbracketbladessuitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300 mm)

•

Fixingoneexhaustfanaftermakingasuitablenotchinthewallandfinishingwithcementmortarandcolouringtomatchtheexistingwallorbrackets,withboltsandnutsanda5A,ceilingrosewithsufficientlengthof23/0.0076inchPVCin...

•

Supplyingcapacitortypeceilingfancompletewithdownrodblades,shackle,canopiesetc,foroperationon230V,50cycles.SinglephaseACsupplyconformingtoISS-374-1979andwithdoubleballbearingsystem.

•

48" Sweep (1200 mm)...

•

supplying.feet.pvcbattenwithintegrantedledtube.wwithhighqualitydiffuserwithlifeof25000burninghours&70%lumenLED light fitting 1 x 2' - 9/10 W

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

28007 Cat-2 A.doc

Tender Document • 0.19 MB

Cat-1 and Cat-2 A Formate-i.pdf

Others - Caste-II A Format • 0.09 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

KIRANKUMAR N GANGAVATI

₹8.5 Laccepted-aoc