Repair of existing CSC Near hospital tarafwala and csc near BDO office Mirpur ram

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and fixing wash basin withC.I.brackets, 15 mm CP pillar cock, 32 mm CP waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size

Providing and fixing white vitreous china pedestal for wash basin completelyrecessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solidplasticseatandlid.(Cera/Hindware/Jaquar)

12 mm thick cement plaster of 1 cement: 6 fine sand mix.

Providing and laying/fixing ceramic Glazed tiles 300X300mmmm (thickness to be specified by the manufacturers) of 1st quality conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc., complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smoothcomplete.(2mm Thick)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats over and including priming coat withwater thinnable cement primer)

Painting steel work with deluxe multi surface paint of required shade to give an evenshade. Two or more coats applied @ 0.90 litre/10sqm over an under coat of primer applied @ 0.80 litre/10sqm of approved brand and manufacture

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete, including applying a priming coat of approved steel primer.10.5.1 Using flats 30*6 mm for diagonal braces and central cross piece