Design Fabrication and Erection of CGI Truss Structure 30 x 20 x 10 feet on the first floor of the existing Office Building and allied works at Mechanical AND Hospital Complex at Kishtwar

Amount

Steel work in built up tubular section for trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. along with window frames and panes. Square / Rectangular Hollow Pipe Section / MS-Plates i. Frame pipe (75 x 40 x 3.2 mm) = 278 ft i.e. 84.73 mtr @ 5.32Kg/Mtr = 450.78 Kg ii. Truss Pipe (80 x 40 x 3.2 mm) = 316 ft i.e. 96.31 mtr @ 5.57Kg/Mtr = 536.48 Kg iii. Truss Bracing (40 x 40 x 3.2 mm) = 267 ft i.e. 81.38 mtr @ 3.56Kg/Mtr = 289.71 Kg iv. Side Bracing (40 x 40 x 3.2 mm) = 879 ft i.e. 267.91 mtr @ 3.56 Kg/Mtr = 953.79 Kg v. Column Pipe (150 x 150 x 4 mm) = 110 ft i.e. 33.52 @ 18.12 Kg/Mtr = 607.38 Kg vi. Purlins (50 x 50 x 4 mm) = 562 ft i.e. 171.29 mtr @ 5.56Kg/Mtr = 952.41 complete scope of work had from SBd

Providing and Fixing Pre painted Galvanized Iron Profile Sheet Roofing 0.50 mm with zinc coating 120 grams per sqm as per IS: 277, in 240 MPA Steel Grade , 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. The sheet should be having guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length. The sheet shall be fixed using self drilling screws with EPDM complete up to pitch in any horizontal / vertical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required along with Eves boarding and inner profile sheeting on the outer area of truss. The job also includes partition of 10 x 15 feet in the Hall 30 x 30 feet along with 01 Air Conditioner 1.5 Ton with automatic stabilizer and electric circuit, Ceiling Fan – 04 No, bulb holders and bulbs 12 watt – 12 No along with laying of new electrical circuit and on/off switches and sockets. The job includes cost of material, tools and tackles, skilled labour, carriage, transportation and all taxes as applicable. Complete Job

Design, Fabrication and Fixing of MS-Sliding Gate (9’ x 5’) by means of metal welding of MS-Channel ISMC 75 (75x40x4.8) – 48 feet i.e. 14.63mtr @ 7.14Kg/mtr, MS-Rectangular Pipe 60 x 25 with 3.2mm thickness - 48 feet i.e. 14.63 mtr @ 3.81Kg/mtr, MS-Square Pipe ISA 25 x 25 with 3.2mm – 132 feet i.e. 40.23 mtr @ 2.05Kg/mtr. The job also includes cost of lock and key arrangement for the sliding gate along with 02 coats of metal primer and 02 coats of metal paint of premium quality, Office Chairs Deluxe – 15 No, Office Table – 01 No. The job includes cost of material, tools and tackles, skilled labour, carriage, transportation and all taxes applicable. Complete Job

RAHIL MENGI CONTRACTOR (BID ID -2478311)

Javeed Iqbal Ahanger (BID ID -2464584)