PROVN OF TOILET BLOCK AND ALLIED WORKS AT BLDG NO BC-137 OF COY AREA SIG REGTD AND PROVN OF CEMENTED SLAB DRAINAGE AT MD ACCN NO P-118 TO P-124 OF FD REGT AT SRC LINE AND PROVN OF HARD STANDING IN MT AREA FD REGT UNDER AGE BR I AGE EM I OF GE NORTH

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

M&L for sand (washed river) filling under floors or in paving n.exc 15 cm thick including watering and consolidation complete all as specified and directed.

M&L for moorum/red bajri filling in floors or paving, laid in layers n exc 15 cm thick , spread, levelled and rammed including watering etc complete all as specified and directed.

Removing excavated material ( spoil ) not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L for hardcore of broken Stones of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded stone aggrigate) as in cover slab chullah hoods, chajjas, water troughs, shelves or similar works set & jointed in CM 1:4 complete all as specified and directed.

M&L for providing reinforced cement concrete M-25 Design Mix (using 20 mm graded crushed stone aggregates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete M-25 Design Mix (using 20 mm graded crushed stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete M-25 Design Mix (using 20 mm graded crushed stone aggregates)as in beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.

M&L for providing reinforced cement concrete M-25 Design Mix (using 20 mm graded crushed stone aggregates)as in columns, pillars, piers, posts and struts complete all as specified and directed.

--------------------BLANK-----------------

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exc 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing form work rough finished surfaces to edges of concrete flats, brick in floor cills, railing etc & similar works exc 10 cm but n.exc 20cm wide complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 156 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 160 of SSR Part-II complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F stainless steel butt hinges of 100 mm size, complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F 1.00 mm th.mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs: ducts; urinal trought and funnels etc cut to size edges beads, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seanes including bending turning up mitred engles, stopped ends, outlets, etc. as required complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 29 here-in-before but 6mm to 8mm dia

All as per Srl item No 29 here-in-before but 5mm dia and over up to and including 10mm diaas in stirrups, spacers / binders.

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonary work complete all as specified and directed. (Note : Disturbed surface of wall shall be made to good to tune surface)

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.06sqm but n.exc 0.11 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry complete all as specified and directed".

M&L for Glazed ceramic tiles coloured 300mmx 450mm X 7 mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set in neat cement slurry complete all as specified and and directed

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for laying 80 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-40 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of oil bound distemper over a coat of JK wall care putty 2mm thick on walls completeall as specified and direcrted.

M&L for preparing of newly decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying two coats of cement base paint, over one coat of primer complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied, hoisted and fixed inposition rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity complete all as specified and directed.

S&F bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F angular valve,, 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F angular valve,, 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup (concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed gun metal globe valves or gate 20 mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied and fixed swivel shower of PTMT any colour for fixing with 15 mm pipe ( min wt 40 gms )complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint laid in trenches/under floor complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

All as per Srl item No 59 here-in-before but 110mm bore

Supplied and fixed UPVC (SWR) bends 110 mm bore complete all as specified and directed

Supplied and fixed UPVC (SWR) bends 75 mm bore complete all as specified and directed

Supplied and fixed PVC (SWR) 110 mm bore junction, single(single 'T') equal or unequal complete all as specified and directed

Supplied and fixed PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed

Supplied and fixed UPVC (SWR) floor trap 75 mm bore complete all as specified and directed

Supplied and fixed UPVC (SWR) floor trap 110 mm bore complete all as specified and directed

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

Supply and fixing in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

M&L for construction of septic tank for 25 users without sludge chamber including necessary earth work in any type of soil (soft / loose / hard / dense) all as shown on drg No TD-217 sheet 1/7 to 7/7 complete all as specified and directed.

Construction of sock well 3 m. dia & 6 m, depth ( effective depth 4.5 m ) all as including necessary earth work as shown on drg No TD-309 Sh. 1/4 to 4/4. complete all as specified and directed.

M&L for providing concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe in PCC 1:3:6 type C2 (using 40 mm graded crushed stone stone aggregates) complete all as specified and directed.

M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.

Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn thorough and including non metallic med. grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 sqmm PVC insulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches /sockets/ regulators etc.all as specifiedand as directed for :- (a) One light point controlled by one way switch.

(d) All as per Srl item No 75 here-in-before but one 3 pin socket outlet 5 Amps on the same board with other switches.

(e) All as per Srl item No 75 here-in-before but one 3 pin socket outlet 5 Amps on the Independent board.

All as per item No 75 here-in-before but with 4 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed.

M&L for socket outlet 5 pin and 5/6 Amps flush type complete all as specified and as directed.

M&L for Switch Piano, flush type single pole, one way 15Amps complete all as specified and as directed.

M&L for socket outlet flush type multipurpose 2 in 1, 3 pin , 5 and 15 Amps complete all as specified and as directed

S&F Exhaust fan AC single phase 230/240 volt of size 300 mm sweep Heavy duty with self opening louvers and shutters complete all as specified and directed. Make :- Khaitan / Orient/ CG

M&L for Ceiling rose PVC/ Polycorbonate insulated body with three terminals complete all as specified and as directed.

M&L for Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings including LED lamp 9W complete all as specified and as directed.

Supply & fix LED tube light fitting surface / pendent mounting decorative box type batten with 18/20 Watt 4 feet long, T-8 diffuser type & 18/20 watt rectrofit tube complete all as specified and directed.

M&L Sheet metal enclosure for DB's with IP 43- IK 09 protection 200 amp rated insulated bus bar, shrouded neutral bar, earth bar, blanking plate, cable ties & circuit identification labels 240 volts SPN 8 way, with metal double door complete all as specified and directed

Supply and fixing in replacement MCB SP, AC, 240 volts of 06 to 32 Amps, 1 module, C curve, 10 kA, confirms to IS/IEC 60898 -1:2002 and making connections complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , for pit cover including testing on completion complete all as specified and directed. Note :- After completion of work if desired test result is not obtained the earthing is to be redone without any extra cost to deptt.

S&F LED street light luminaries in a single pipe deep drawn aluminium housing anodised inside and acrylic cover complete with 25 watt minimum 100 lumens per watt in built control gear including up to 2.5 mtr twin core aluminium conductor for connector of street light fitting from LT OH line/ceiling rose.and street light bracket made out of 25 mm dia GI pipe Medium grade 0.90 mtr long band to shape 120 degree angle fixed to pole/wall/ceiling by two nos MS clamp made out of flat iron size 40 x 5 mm with nut bolts and washer complete all as directed by Engr in Charge.

S&F water heater storage type electric supply and installed of capacity 50 ltr BEE 5 Star rating complete all as specified and directed

Supply & fix LED 10 watt (Bulk head light fitting) cast aluminium oval shape body finished with stove enameled & heat resistant oval shape designed clear /diffuser glass cover with rubber gasket.with wire mash guard complete all as specified and as directed.

Supplied & fixed stop valves, 15mm bore dia cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied & fixed bib cock, 15mm bore dia cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F of union to connect iron to polythylene 15mm dia ISI marked complete all as specified and directed

S&F and grouting in wall sheet metal enclosure factory fabricated with single pole & neutral with a two pin and earth plug top and socket complete with one single pole MCB 20 Amps 240 volts.

Supply & fixing MCB SPN, AC, 240 volts of 63 Amps, 2 modules, C curve, 10 kA, confirms to IS/IEC 60898 -1:2002 and making connections complete all as specified & directed.

Supply and lay in trenches/ fixed on wall or fixing or passing through pipe, Testing & commissioning cable PVC Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core all as specified and directed .

M&L for laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and as directed.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:-One meter of conduit along with 2x6 sq mm wire and one 4 sq mm earth shall be measured as one unit length.

S&F 40mm dia steel tubing light grade in protection of cable at road crossing / hard standing / pole proteciton fixed with clamp as per site requirement complete all as specified and directed

SHAKTI CONSTRUCTION CO

mohanlal gupta

SA construction co.

Shivam Construction Co.

Tridev Construction Company