Exterior wall painting including necessary repairing works of C and P Building and Staff Quarter, Corporate Head Quarter, Shillong.

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: a) Of area 3 sqm and below

Providing and wood work in frames of doors, windows, clerestory window and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter & length (b) Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing glazed shutters for doors,windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. C. With 1st Class local wood I)Pooma/ Hollock/ Gamari/ and the like (ii) 30 mm thick

Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3x100 mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65 mm and not less than 15 mm wide) bolting device, steel handles, pegs, stays 300 mm long etc. complete including providing 12x12 mm square bars duly welded to steel frame at not more than 12 cm c/c applying a priming coat of red-lead paint etc.complete as per drawing. A) Openable

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specification,including scaffolding a) Two or more coats applied on walls @ 1.25 ltr/10sqm over and including one coat of special primer applied @0.75lte/10sqm

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: (b) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coats applied @ 0.90 ltr/10 sqm over an under coat of Primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture

C) painting steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer pplied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Providing and fixing chromium plated brass handles with screws etc.complete: (a) 125mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: (d) 100 x 10 mm