ADDITION/ALTERATION/RENOVATION TO GEMINI SHED,DIVING CELL CABIN,EQUIPMENT STORE ROOM AND PROVISION OF 3NOS OF AIR CONDITIONER AND ASSOCITED B/R AND E/M WORKS AT TIMBER POND INSIDE CHENNAI PORT TRUST CHENNAI UNDER GE(I) CHENNAI

Amount

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles protions ordered to be dismanted including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc and removing rubbish off the premises, removal and depositing servicable materials where directed complete all as specified and as directed

Material and labour for Rendering in CM 1:6, ,15 mm thick on fair faces of brick work surfaces and mixed with WPC as per manufacuture instructions,finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separtely

Material and labour for Rendering in CM 1:4, ,10 mm thick on other than fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Liquid Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

Dismantling of steel sheet (corrugated, semicorrugated, etc.) sheets in roof coverings including nanital or similiar patten roof covering removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed. all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make:Tata Blue Scope/Jindal/Llyod

Supply and fix Rolled Mild steelsections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe-410-W(Gde-E-250) quality B complete all as specified and as directed.

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness (below or above ground level) including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Material and labour for hardcore of guage n.exc 63mm, broken stone aggregate deposited, spread & leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) 100 mm thick in sub base floors complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate ) 100 mm thick in sub base floors and finishing with broom or MS Jalli complete all as specified and as directed.

Material and labour for Forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade-B all as specified and as directed.Note:Make of Bituminous filler :M/S STP LTD

Material and Labour for M-Sand cushioning of 25 mm thick under floors as cushioning to tiles including watering and consolidation complete all as specified and directed. Note: Punned thickness shall be measured and paid

Material and labour for Providing and laying Machine pressed rubber moulded precast concrete interlocking paver block any shape and size of 60mm thickness, M-35 Grade confirming to IS-15628-2006 complete all as specified and as directed.,

Material and labour for Preparation of plastered or un plastered old surfaces of wall including pilasters and cornice etc and applying two coats of white wash complete all as specified and as directed.

Material and labour for Preparation of old surface of wall including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

Material and labour for preparation of new painted steel or iron surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Material and labour for Reinforced cement concrete 1:2:4 concrete type B0 using 12.5 mm graded stone aggregate as in repair of chajja, cill, facia, parapet etc. including necessary formwork complete all as specified and as directed

Material and labour for TMT bars 10 mm dia and over cut to length, bent to shape required,including cranking,bending,spirally for hooping for columns ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed

Material and labour for corrosion resistant TMT bars of grade Fe-500/500D of 5 mm dia bar and overupto including 10 mm dia , cut to length, bent to shape required, including stirrups, spacers and binders with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also beams, etc.plays between floors and beams etc complete all as specifed

Supply anfd fix in repairs Vitreous china wash down water closet pan (pedestal pattern ), Floor mounted ,white with all fittings including fixing bolts but excluding flushing cistern and flush pipe and including connection to drain pipe and to flushing pipe etc and provision of plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices with including 'P' or 'S' trap complete all as specified and as directed . Make : Hindware cat no: 20044 or Equivalent model in Jaquar

Supply and fix in repairs PVC low level flushing cistern white 10 litres capacity syphonic action type with complete accessories including 32 mm dia CP flush pipe etc., fixed with inlet ball valve,float ,handle and necessary mild steel brackets and connecting to pipes and fixing of chain and pully or lever if any complete all as specified and as directed.Note :Make of flushing cistern :Parryware cat no : C8090 or Equivalent model in Neycer/ Cera

Supply and fix in repair vitreous china wash basin, white flat back size 630 x 450 mm including brackets, cutting for and pinning in ends of bracket or errecting stand including 32mm dia bore 1.5m long LDPE waste pipe complete all as specified and as directed.

Supply and fix in repair 1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I ,ISI Marked including dismantling old water tank and taken as credit complete all as specified and as directed. Make :Sintex/Polycon (ISI Mark

Supply and fix in repair 20 mm bore dia Ball brass valves, high pressure, with polyethene float & fly-nut complete, screwed for GI pipe or brass ferrule complete all as specified and as specified.

Taking down old rusted steel water tubing of size 15 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse and unserviceable pipes taken as credit complete all as specified and as directed

Taking down old rusted steel water tubing of sizes 20 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse and unserviceable pipes taken as credit complete all as specified and as directed.

Supply and fix 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed .Make :SFMC/Vectus

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed .Make :SFMC/Vectus

Supply and fix in repair chromium plated fancy type 15mm dia bore Bib tap ,cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: Prayag/ Cera/Hindware.

Supply and fix in repair Fancy type chromium plated pillar taps, LONG NECK ,15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: Prayag/ Cera/Hindware.

Supply and fix in repairs 15mm dia bore stop /gate valve(fancy type), cast copper alloy chromium plated with long shank and cup screwed down high pressure, with crutch or butterfly handle screwed both ends for GI pipe or for unions complete all as specified and as directed. Make: Prayag/ Cera/Hindware.

Supply and fix in Repair Fancy type chromium plated concelead stop cock, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: Prayag/ Cera/Hindware.

Supply and fix in repair waste fiiting 32mm bore brass chromium plated for glazed ware sink or basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with 32mm bore PVC Low density polyethylene waste pipe complete all specified and as directed.

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 375 mm long complete all as specified and as directed.Make :Prayag/M/S Shakthi Industries

Material and labour for Cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 sq cm but not exc 400 sq cm complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) with PVC Foam profile ,homogeneous fine cellular structure having smooth outer integral skin consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC (C) channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed stone ware, AC or reinforced concrete) set in cement mortar including removal of debris off the premises not exceeding 100 meter complete all as specified and as directed.

Material and labour for Salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid in trenches and jointed in cement mortar 1:1 on Concrete bed complete including testing etc and concrete bed to drain pipes of bore 150mm including packing under and haunching against the sides of pipes after they are laid and treated in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate and testing complete all as specified and as directed. Note:-(i)Excavation and earth work shall be measured and paid separately under relevent items . .(ii) Make of SGSW pipe:M/S TSL

Dismantling wall and ceiling boards (Fibre,pulp,insulation etc) or insulation boards/slabs/blankets , any thickness including cover fillets and taken as credit complete all as specified and as directed.

Supply and fix Powder coated aluminium snap grid frame work (size of grid 605 mmx605mm) ceilingcomplete all as specified and as directed. The following instruction should be follow while making/laying snapgrid:- Note:(i)Type of Grid : Armstrong Shilhouette grid .(ii)Minimum thickness of powder coating shall be 50 microns. (iii) Make of aluminiumgrid : Jindal/Hindalco/Indal a) Main 'T' Length = 3600mm, Web = 25mm, Flange = 35mm & thickness = 0.7mm (it is Suspended from the soffit @ 1200mm C/C with level clip). b) Cross 'T' Length = 1200mm, Web = 25mm, Flange = 35mm & thickness = 0.7mm (It is inserted fixed into the slots of main 'T' @ 600mm to from a grid of 1200 x 600mm). c) Cross 'T' : Length = 600mm, Web = 25mm, Flange = 35mm & thickness = 0.7mm (It is inserted fixed into the slots of main 'T' @ 600mm to from a grid of 600 x 600mm). c) Wall angle Web & flange = 25mm, & thickness = 0.7mm fixed to the perimeter wall of the wall portion). d) Level clip with wire : wire dia = 4mm (Used @ 1200mm c/c to hold the main 'T') e) Soffit cleat : Web=25mm Flange= 37& 25mm thickness=1.80mm ( Used at 1200mm c/c to the roul plug to suspended level clip with wire) f) Row Plug : 12.7 diameter ( used @ 1200mm c/c in both c/c in both direction) complete all as specified and as directed.

Material and labour for Hangers 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G I flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia ,40 mm long complete all as specified and as directed.

Supply and fix 08 mm thick PVC insulation panel with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium complete all specified and as directed.Make:Armstrong/Luxalon by Hunter Douglas Products

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for virtified ceramic coloured tiles ,Premium quality , Light shade (shade as approved by GE) . 9 to10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Glazed coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile not exc. 0.18 sqm in verticals etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 ,10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Supply and fix for Parking coloured Non-skid Ceramic tiles 10-12mm thick (Heavy duty)(square or rectangular) area of each tiles exc 0.08sqm but not exc 0.16 sqm in floor including 20mm thick screed bed in cement mortar 1:6 set joined in neat cement slurry and pointed in white or coloured cement to match over all as specified and as directed.

Supply and wall cladding tiles 10mm thick (square or rectangular) area of each tiles not exc 0.18 sqm as in vertical sufaces including 10mm thick rendering in cement mortar 1:4 set joined in neat cement slurry and pointed in white or r coloured cement to match over all as specified and as directed.

Supply and fix 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes including all fittings and fixtures as required all as specified and as directed.

Material and labour for 2 mm thick Wall Care Putty including cleaning the wall surface with the help of sand paper, putty blade or wire brush and then apply 1st putty coat on moistened surface and after surface dried , rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to obtain glossy surface complete all as specified and as directed. Note:Make of wall putty :Jk White cement/Birla Wall care putty

Taking down chowkhats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames with shutters exceeding 1.5 sqm and not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Supply and fix powder coated aluminium frames and grills for windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , powder coated alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 50 microns.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , powder coated alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 15 microns.

Supply and fix Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum powder coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coating aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Refixing Stainless steel (Grade 316) railing mode of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever requried) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasterners, stainless steel bolts etc of requried size on the top of floor or the side of waist slab with suitable arrangment all complete all as specified and as directed.

Supply and fix Plain sheet glass pane 4.80 mm thick ordinary quality and glazing with oil putty or beads in squares n exc 0.5 sqm in each pane complete all as specified and as directed. Note :(i) Make of Glass : Saint gobain/Modi Guard/Gold Fish

Supply and fix Factory made 35 mm thick second class hard wood plain framed, panelled shutter (any number of panel) with lock rail with well seasoned wood fitted with panel of 9mm B.W.P. commerical ply or 12 mm thick venneered particle board with commerical veneering on both faces fitted to chowkats with rail and stile as per IS 1003 Part-1 kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix Flush shutters 40 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides and fixed to chowkats complete all as specified and as directed.

Material and labour for Second class hard wood plain, solid , straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix Factory made Second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided in to square (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to chowkat complete all as specified and as directed.

Supply and fix Mild steel hold fast made of flat iron conforming to Fe-290 Gde E-165 of size 25 x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp sand all complete all as specified and as directed.

Supply and fix in repair Flush shutters 19 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides and fixed to chowkats complete all as specified and as directed.

Supply and fix 125 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix 200 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix in repairs 250 mm long Aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix 50 mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix 75mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix 100 mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix 100 mm long aluminium handles anodised fabricated type complete all as specified and as directed.Make :Crown/Classic /ESS ESS

Supply and fix 150 mm long aluminium handles anodised fabricated type complete all as specified and as directed.Make :Crown/Classic /ESS ESS

Taking down carefully point wiring with copper/aluminium conductor (light,fan, socket or power complete ) and fittings such as switches,ceiling roses,pendents,regulators,sockets,light fittings,calling bell etc and removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully submain wiring with aluminum conductor cable 4/6/2.5/1.5 Sqmm in PVC conduit complete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully unserivce able TPN/SPN DB with MCBcomplete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non mteallic rigid PVC conduit of size 25 mm dia concealed in wall/floor etc along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling/ roof with and including PVC recangular board of adequate size for mountling switches, socket, fan regulators etc complete for the following points complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/Plaza.(ii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex

One light point controlled by one switch

One fan point controlled by one switch

Material and labour for Sub main wiring with two runs single core 2.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 2.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 15 Amp socket and DB to main switch box

Material and labour for Sub main wiring with two runs single core 1.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 1.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 5 Amp socket and DB to main switch box

Supply and fix repair Switch piano flush type single pole one way 5 Amp complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and as directed.Make:- C&S/HPL/Legrand

Supply and fix Switch socket combination 2 in 1, 3 pin, 5 to 15 Amp flush type universal complete all as specified and as directed.Make:- C&S/HPL/Legrand

Supply and fix Ceiling rose, surface type, PVC of 25 x 50mm, two to three terminals AC 230 V complete all as specified and as directed.Make:- C&S/HPL/Legrand

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps double door rated bus bar SPN 8 way complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCB SPN 5 to 30 Amps, Repturing capacity 10KA complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCB SP 5 to 16 Amps, Repturing capacity 10Ka complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and Fix Recess mounted 2' x 2' LED flat panel 34W ,4000k high efficiency with high brightness LED for glare free homogenous illumination mounted square slim and elegant downlight/panel for indoor application with high aesthetic appeal,available in various wattage for soothing light suitable for grid ceiling with super bright LED model complete with all accessories internally pre wired and connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. Havells Cat part No VENUSNEOHE2X2PLR18-42WLED865MOD or equivalent in Philips/Cromtpon/surya/Bajaj

Supply and fix LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN021C LED20 S PSU CW GR S2 In case the make mentioned above is not available in market then equivalent price and specification in M/S Wipro /M/S Bajaj /Havells/Crompton.

Supply and fix LED light fitting 2 feet white, 10W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN 021 LED10S- 6500 PSU GR S1 In case the make mentioned above is not available in market then equivalent price and specification in M/S Wipro /M/S Bajaj/M/S Wipro /M/S Bajaj /Havells/Crompton.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than2.25 Metre, deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized iron strip 32 x 6mm by means of bolts, nuts washers checknuts of galvanized or steel all as shown in electrical plate No 3 of SSR Part I connected to earthing test points all as specified or indicated including 25 Kgs of Bentonite powder and excavation and earth work, PCC 1:2:4 type 1 in chamber, RCC cover 50mm thick in 1:2:4, type B1 (20mm graded aggregate) with 8mm MS rod at 15cm in both ways hook, funnels with 50mm dia protection pipe and 20mm dia medium grade watering pipe, wiremesh and GI lugs, GI protection pipe and testing on completion complete all as specified and as directed Note: The rate quoted inclusive of 32X6mm GI earth strip upto a length of 7.5mtrs from the earth pit

Material and labour for Earth continuity conductor or main earthling lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop eatthing etc as required 20x3mm copper strip complete all as specified and as directed

Supply and fix 5 Star rating ceiling fan 1200mm sweep Min air delivery 210 CFM with service value of 6.0 BEE five star rated with brush less direct current motor (BLDC).” suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor and including taking down old fans and removal to store complete all as specified and as directed. Make : Anchor/Havells/Crompton

Supply and fix heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver including taking down old fans and removal to store all as specified and directed. Make : Havells/Crompton/Almonard

Supply and Install Hi wall split Air Conditioner units Indoor, outdoor (Copper Condenser coil, Copper cooling coil and evaporator including required length of copper tubing and copper cables for connecting indoor and outdoor units) complete cardless remote control unit and with in-built ioniser and plasma filter for better indoor air quality with BEE 5 Star rating,Inverter type and stabilizer free operation of capacity 1.50 TR ,year of manufacturing 2022 ,filled with Refrigerant gas -R32/R410A complete all as specified and as directed. Make: O GENERAL/ HITACHI/MITSUBISHI Note : The rate quoted by the tenderer shall inclusive of the following provisions :- (i) PVC drain pipe not less than 20 mm dia from indoor unit (any floor) to upto ground level/ near to drain to be fixed with proper size base plate with clamps complete. (ii) Copper pipe 5/8" dia and 3/8" dia with 20SWG thickness refrigerant Piping with 19 mm (Suction line) & 13mm (Discharge line) thick Closed Cell rubber nitrile, Class "O"- arm-flex insulation and including connection complete up to 3 metre included in this item and beyond 3.00 mtr will be measured & paid separately under respective items. (iii) GI powder coated brackets of required size:02 Nos including grouting with suitable size fastners . (iv) After completion of installation of ACs, the MES No and SM stickers are to be pasted over the indoor and outdoor units of AC as per direction of Engr-in-Charge

Supply and Install Hi wall split Air Conditioner units Indoor, outdoor (Copper Condenser coil, Copper cooling coil and evaporator including required length of copper tubing and copper cables for connecting indoor and outdoor units) complete cardless remote control unit and with in-built ioniser and plasma filter for better indoor air quality with BEE 5 Star rating,Inverter type and stabilizer free operation of capacity 2.00 TR ,year of manufacturing 2022,filled with Refrigerant gas -R32/R410A complete all as specified and as directed. Make: O GENERAL/ HITACHI/MITSUBISHI Note : The rate quoted by the tenderer shall inclusive of the following provisions :- (i) PVC drain pipe not less than 20 mm dia from indoor unit (any floor) to upto ground level/ near to drain to be fixed with proper size base plate with clamps complete. (ii) Copper pipe 5/8" dia and 3/8" dia with 20SWG thickness refrigerant Piping with 19 mm (Suction line) & 13mm (Discharge line) thick Closed Cell rubber nitrile, Class "O"- arm-flex insulation and including connection complete up to 3 metre included in this item and beyond 3.00 mtr will be measured & paid separately under respective items. (iii) GI powder coated brackets of required size:02 Nos including grouting with suitable size fastners . (iv) After completion of installation of ACs, the MES No and SM stickers are to be pasted over the indoor and outdoor units of AC as per direction of Engr-in-Charge

Material and labour for Sub main wiring with two runs single core 4 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for 03X phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Supply and fixing sheet metal enclosure with socket plug top and MCBs complete single pole and netural enclosure with 3-pin and earth plug and socket complete with single pole MCB 30 Amp capacity including fixing in walls dully embedded complete all as complete directed.

Supply and fix Copper pipe 5/8" dia 20SWG thickness with refrigerant Piping with 19 mm thick Closed Cell rubber nitrile, Class "O"- arm-flex insulation and including connection complete all as specified and as directed.

Supply and fixing of Copper pipe 3/8" dia 20SWG thickness with refrigerant Piping with 13 mm thick Closed Cell rubber nitrile, Class "O"- arm-flex insulation and including connection complete all as specified and as directed.

VIJAYALAKSHMI ENTERPRISES

M/SJAYAM CONSTRUCTIONS