WBPWD/EE/AED /eNIQ-98/2024-25

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1x22/0.3 (1.5 sqmm) single corestranded 'FR' PVC insulated & unsheathed copper wire forECC, to light/fan/call bell points with Piano Key type switchfixed on MS CRC sheet metal (16 SWG) switch board cumJB on wall complete with 2 no. suitable size “Ph & N” copperbar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box,making earthing attachment, painting the MS box andmending good the damages to original finish i)Average run 8 mtr

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required i) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

iii)2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Supply & Delivery 1.1KV grade LT Aluminium PVC/XLPE Armoured cable( Make- Havells/ polycab/ RR/ KEI ) as per choice of EIC. The cable shall conform to IS 7098/ Part I with anti termite and anti rodent features. i) 4 Core 16 sq.mm.

ii) 4 core 25 sq.mm

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on thetop of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supplying and fixing compression type gland complete with brassgland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC armoured cables as below : i) 4 Core 16 sq.mm.

ii) 4 core 25 sq.mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : i) 4 Core 16 sq.mm.

ii) 4 core 25 sq.mm

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Delivery of 36W,4ft long(Philips Make) Flouroscent tube light only.

Supply & Delivery of 36/ 40 watt Electronic ballast for fluorescent tube light. [Phillips: EBE SLIM 1x36 TLD 240 or equivalent make of Crompton/Havells ]

Supply & Delivery of 36/ 40 watt Electronic ballast for fluorescent tube light. [Phillips: EBE SLIM 2x36 TLD 240or equivalent make of Crompton/Havells ]

Supply & Delivery only Single commercial TLED tube retrofit metal batten frame. i).Single Tube batten[PHILIPS-TMC-501-P-1XT-LED-P3241/Crompton/Havells]. (With 2 Years Warranty)

Supply & Delivery only Single commercial TLED tube lamp PCB Body having minimum 100Lumen/Watt. i).Single Tube [PHILIPS master LED or Equivalent make of Crompton/Havells]. (With 2 Years Warranty)

Supply & Delivery only Single commercial TLED tube Holder for fixing in Tube Batten. (Approved Make,as per choice of EIC)

Supply of 240V LED Lamps of Philips make of the following Wattage & Type. i) 9Watt LED B22/E14/E27 lamp. (Approved Make,as per choice of EIC). (With Minimum 1 Years Warranty).

Supply & Delivery 250v, 2.25 mfd burst proof(P-2type ) fan Capacitor (Approved Make,as per choice of EIC)

Supply & Delivery of 240V,Step Type Electronics Fan regulator. (Approved Make,as per choice of EIC)

Supply & Delivery of 240V flushed type Socket of the following ampere rating. (Approved Make,as per choice of EIC) i)6A; Multi Socket for 5 Pin

ii)16A , Socket 3Pin

Supply & Delivery of 240V piano key type Switch of the following ampere rating & Type. (Approved Make,as per choice of EIC) i)6A; 1Way.

ii)16A; 1Way

ii)Supply & Delivery of 240V Moduler type Socket of the following ampere rating. (Anchor/Legrand or as per direction of EIC)16A , Socket 3Pin.

ii)Supply & Delivery of 240V Moduler type Switch of the following ampere rating & Type. (Approved Make,as per choice of EIC) 16A; 1Way.

Supply & Delivery of 20A Switch Socket(SS) combination with Shutter & 4 fixing holes. (Approved Make,as per choice of EIC)

Supply & Delivery of 240 V ,20A single phase DOL Starter. (Approved Make,as per choice of EIC)

Supply & Delivery of 240 V ,21A single phase OLP3+ Starter(Approved Make,as per choice of EIC)

Supply & Delivery of Angle Holder for fixing Lamp.(Approved Make,as per choice of EIC)

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(Make-L&T/Siemens/Havells) 63A on flat iron frame.

100A on flat iron frame.

125A on flat iron frame.

Supplying & fixing sheet metal 415 V, 100/125 A(16 SWG) Iron Clad 4 bar copper Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)Dimension ofCu. bars4 x 15x3mm[85mm long],Dimension of Sheet MetalBox-500x150mm.

Supplying and delivery of 250 volts, 50Hz, (12”) sweep 1420 R.P.M. heavy duty exhaust fan complete with all accessories after making hole on wall and mending good damages as per practicable incl. providing necessary CU wire for connection & S and F louver shutter ((Approved Make,as per choice of EIC) ) as to Gs. i) Exhaust fan(12”)

Supplying and delivery of 250 volts, 50Hz, (9”) sweep 1420 R.P.M. heavy duty exhaust fan complete with all accessories after making hole on wall and mending good damages as per practicable incl. providing necessary CU wire for connection & S and F louver shutter (Approved Make,as per choice of EIC) as to Gs. ii)Exhaust fan(9”) (With 2 Years Warranty)

Supply of 48"ceiling fans complete with all accessories like fan blade,canopy,capacitor etc Model / Cat No. ( Make - USHA /Crompton Greaves/Havells ) as per direction of EIC a. 1200 mm Sweep (With 2 Years Warranty)

Supply and delivery of 240V, 70W LED street light having IP-66 protection ,efficacy-minimum 120Lumen/watt,10KV SPD included.(Make-crompton model no-TRP-421-70-57-SL-LM-NBK or eqivalant make of Philips/Havells) (With 2 Years Warranty)

Supply and delivery of 240V, 150W LED street light having IP-66 protection,efficacy-minimum 110/120Lumen/watt,10KV SPD included.(Make-crompton model no-TRP-424-150-57-HL2-LM-NSG or eqivalant make of Philips/Havells) (With 2 Years Warranty)

Add GST @18% On total from item no 1 to 33.

Add LWC @1% On total from item no 1 to 34.

ADHISHARM INDUSTRIALS (BID ID -6078887)

SADHAN ELECTRICAL ENTERPRISE (BID ID -6076796)