Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹29.5 L
EMD Value
₹59,100
Closing Date
15 Dec 2025, 4:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Corporation Limited
RAVIPRAKASH M
Arresting leakages of GLSR tank using TPO membrane including other improvement works at Hosangadi colony
KPCL/2025-26/WS/WORK_INDENT3736
KPCL/2025-26/WS/WORK_INDENT3736
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
KPCL Executive Engineer CIVIL Office SVP Hosangadi
1 document required · 1 mandatory
To qualify for award of this contract, each tenderer in its name should have, in the last five years i.e., 2020-21, 2021-22,2022-23, 2023-24& 2024-25 , Satisfactorily completed (at least 90% of the contract value) as a prime contractor at least one work involving TPO membrane of value not less than Rs. 14.78 Lakhs during the preceding five financial years. The past experience should be supported by original scanned copy of the Work done certificate issued from state/central Government/Government under taking from the officers not below the rank of Executive Engineer. (Work done of previous financial years shall be given weightage of 10% per year to bring them to the price level of the financial year in which the tender is invited)
Tender capacity - (A x N x 2.5-B), where, AMaximum value of works executed in any one year during the last fve years (updated to 2025-26 price level) taking into account the Completed as well as works in progress. NNumber of years prescribed for completion of the works for which Tenders are invited for 0.25 years. B-Value at 2025-26 price level of existing commitments and ongoing works to be completed during the 0.25years (period of completion of the works for which Tenders are invited)
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2020-21, 2021-22,2022-23, 2023-24& 2024-25 achieved in at least Two (02) financial years an average annual financial turnover Rs. 29.55 Lakhs in the last 05 (Five) financial years. Turnover certificate, duly certified by chartered Accountant (along with UDIN No) shall be furnished. (Financial turnover of previous financial years shall be given weightage of 10% per year to bring them to the price level of the financial year in which the tender is invited)
Certificate of registration in KPWD Class III& above
Income - Tax PAN
GST registration certificate
PF Registration certificate (independent PF Code)
List of existing commitments and ongoing work (B value of assessing Tender capacity) Section -3 of Bid Document. Qualification information 1.3 (A).(Format-2)
nil
nil
nil
nil
₹740
₹59,100
29 Nov 2025
29 Nov 2025
16 Dec 2025
13 Dec 2025
Arresting leakages of GLSR tank using TPO membrane including other improvement works at Hosangadi colony.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...
Drilling 25mm dia holes (Non coring) Vertical or inclined in concrete / Masonry /rock by rotary method as directed to specified depth including cost of all materials, machinery , labours, cleaning hol...
Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessar...
Sealing of cracks/porous concrete cement mortar 1:1g routing by njection process through nipples/Grouting complete as per Technical Specification. ---- In accordance with fnance department circular No...
Epoxy bonding of new concrete to old concrete. ---- In accordance with fnance department circular No FD417EXP-12/2024, dated 09.08.2024, bidders are required to submit thefnancial quotes excluding GST
Applying epoxy mortar over leached, honey combed and spalled concrete surface and exposed steel reinforcement complete as per Technical Specification. ---- In accordance with fnance department circula...
Providing and installing, TPO single side Fleece back Membrane, Membrane shall be high performance, heat weldable, thermoplastic polyolefin (TPO) sheet, manufactured & supplied in specified thickness ...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Demolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as pe...
Providing and laying in Cement Concrete M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesfor all Basement & surface level works, return walls, retaining walls, sunken floors etc...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Dismantling Steel/wooden windows, doors, ventilators of area 3 m² and below.including cleraing,stacking or disposing off the relesed materials as directed etc., complete with all leads and lifts. ---...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free wit...
Providing and fixing DI/CI puddle flanges of 200mm dia. conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead ...
Providing and fixing DI Resilient seated soft sealing For sluice Valve of PN -10.0 and 200mm dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GG...
Providing and fixing DI Resilient seated soft sealing For sluice Valve of PN -10.0 and 100mm dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GG...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Providing of DI flanged pipe conforming to IS 8329 : 2000 with latest amendments with Cement Mortar Lining (CML) with Portland SlagCement as per IS 455:1989 and Metallic Zinc Coating as per annexure A...
Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of...
Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of...
Cleaning of GLR's clarifloculator tank, back wash filter tank etc., and Cleaning of Over head tanks of residential and non-residential buildings hosanagadi and VUGPH, including brushing, washing and r...
Providing and fixing Aluminium Turbo ventilator Non Power Driven with 1.2mm thickness and 38 No.s of Vanes & turbine doom thickness 1mm and total weight not less than 6kg for Industrial use for area u...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Hiring of 10HP pump to 20mtr head and discharge 1 lakh per hour on rental basis to pump water from GLSR-02 to OHT during the repair/restoration of GLSR-01 including all electrication and plumbing work...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring,strutting, arricading, caution lights, ...
Providing and fixing precoated galvanised steel sheet roofing Ridges plain (500 - 600mm) 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 mic...
Providing and fixing precoated galvanised steel sheet roofing Gutter (600 mm over all girth) 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid doc GLSR.docx
Tender Document • 1.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .