SITC of Gearless Lift 1500 KG Goods Lift in Court Complex Distt Dholpur.

Supplying, Installation ,Testing and commissioning of the Gearless goods Elevator 1500 kg 4 stop , rated speed adjustable upto 0.5 mtr/sec having following main features from (a) to (p) mentioned below and all as per pre approved by engineer in charge. For additional technical parameters of products/works, refer Annexure ''A '' attached with P.W.D. Electrical B.S.R. 2022.

(a)MOTOR : Gear less drive comprising of high starting torque lift duty, 3 phase 415Volts A.C. permanent magnetic synchronous motor of proper rating with high efficiency, shall be used.

( c ) Traction Media: main hoist flat coated steel belt / rope. Thimbles of spring permit adjustment of uniform tension for smooth operation of the elevator Pulse belt monitoring system to avoid the cut in the belt.

(d) Car: Car should be with M S platform with bracings of adquate size and to sustain the impact load cabin plus Goods Weight, with safety factor of fire for steel with Aluminium Chequre Plate Flooring on heavy duty M. S. Platform as desined and side panels should be of Stainless steel with Moonrock /Honeycomb finish of sheet of grade 304 duty with S.S. handrails . Car ceiling shall be steel finish with aesthetic appearances with LED ceiling lights .The size of the car shall be taken as per available lift well size and relevant Bis code of Goods lifts. Car panel will also be of SS 304 grade finished with emergency stop device , emergency alarm,mechanical door safety device ,full length infra-red curtain in car door, facility of auto/attended mode All car panel buttons and all floor switches must be with brail language as per lift act. Agency shall be resposible for laying of LAN Cables for CCTV Camera's ( To be connected with Existing CCTV system in the building, camera will be provided by department) The inspection unit shall be provided at the Top of the car.

(e) Landing Doors: All landing door shall be fully automatic centre opening /telescopic opening not less than 1200 mm width & 2000 mm Height opening as per suitable to shaft size and as according to goods lift BIS cade. Lift made of Moonrock /Honeycomb finish stainless steel grade 304 with key holes and infrared curtains with unlocking facility from outside.

(f) Emergency light: Appropriate rechargeable battery operated LED emergency light in the car and along with alarm switch shall be provided.

(g) ARD: Automatic rescue Device (ARD) shall be provided according to Load capacity with SMF batteries of approved brands as per BSR.

(h) Audio-Visual Indication : Audio visual indication in the lift car , showing over loading such that doors kept open till excess load is removed.

(i) Scrolling Indicators: Digital scrolling indicator system for up-down arrow with floor position indicator shall be provided inside the car and at all stops/floors.

(j) Buffers: Spring buffers/PU Buffers shall be provided.

(k) Car Fan: ENERGY EFFICIENT Car fan/blower with automatlc sleep timer be provided.

(I) Voice Annunciator: Voice annunciator with suitable music shall be provide car

(m) Self diagnostics system for operational and safety parameters shall be provided in control panel

(n) Mechanical/Electronic over speed governor, door key holes in the floor doors,fireman switch shall be provided.

(0) Lift machine hoisting arrangement in the lift (MRL) , counter balance to promote smooth and economic operation complete with steel guide rails for the car & counter weight , Trap Door, Lifting hooks asrequired and monkey ladders for lift pit should be provided by the agency along with all other steel structure works , Foundations for the machine etc as required .

(P)Agency has to provide all working drawings and documents to comply latest BIS specification and make proper liaison services for obtaining all necessary permissions.

Gearless Load Elevator with 4 stops speed 0.5 mtr/sec.

Plate Earthing as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

32mm x6mm G.I. ( Hot Dipped ) Strip

Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity purity >95% thimble etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

8 SWG G.I. ( Hot Dipped ) Wire