PROVISION OF TEMPORARY SHED WITH PAVER BLOCK HARD STANDING FOR VEHICLE PARKING ON 03 ACRES LAND AT BHUBANESWAR UNDER GE I CG BHUBANESWAR

Amount

SCH 'A' PART-I (B/R PORTION) Surface excavation hard and dense n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavating in post holes (or similar holes) each hard and dense soil n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide, and not exceeding 1.5 M in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.

M& L for plain cement concrete 1:2:4 using 20 mm graded stone aggregate as in mass concrete complete all as specified and directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type D2 1:4:8 using 40 mm graded stone aggregate in foundations, filling and mass concrete etc complete all as specified and directed.

M&L for 75 mm thick sub base plain cement concrete type B2 1:2:4 20 mm graded aggregate as ub floor finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement pigment complete all as specified and directed.

M&L 25 mm thick sand cushion under interlocking paver tiles including watering and consolidation complete all as specified and directed.

M&L forming construction joint 30 mm deep x 10 mm wide filled with sealing compound grade 'A' complete complete all as specified and directed.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparing surface of steel and iron work of new surfaces and of any description over 10 CM width or girth ,not other wise describe and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for fly ash bricks mean radius on plan exc 6 m straight or curved built in CM 1:6 complete all as specified and directed.

M&L 15mm thick, rendering in Cement mortar (1:6) on wall of stone surfaces & finished even & smooth w/o using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate ) as in coping,padding etc complete all as specified and directed.

SCH 'A' PART-II (E/M PORTION) M&L for point wiring with 2 single core PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including PVC conduit with Class A teak wood boxes and 3mm thick laminated sheet top cover for light/fan/socket controlled by one switch complete with 1.5 sqmm PVC insulated unsheathed stranded copper conductor 1100 volts grade green colour for earth continuity complete all as specified and directed.

One light point controlled by one single way switch .

One 5 pin 5/6 Amp Socket outlet on the same board with other switches.

S&F switch piano flush type 5 Amps, single pole, one way complete all as specified and directed.

Supply and fixing switch socket combination 3/5 pin 5 Amp flush type 240 volt complete all as specified and directed.

S&F for ceiliing rose three terminal surface type bakelite 65x50 mm complete all as specified and directed.

S&F MCB distrubution board,SPN,double door,sheet steel,phosphatised,power painted with 200 amps bus-bar,neutral link,earth bar and din rail 240V,8 way complete all as specified and directed.

Supply and Fixing only MCB SPN,240V,6 Amp to 32 Amps,10KA complete all as specified and directed.

Supply and Fixing only MCB SP,240V,6 Amp to 32 Amps10KA complete all as specified and directed.

Supply and fixing energy saving environmental friendly, long life led Bldg security light fitting 25 watt made of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperete driver compartment with IP 66 protection including Brackets, clamps, nuts, bolts, washers and electric connection complete all as specified and directed. (Make :Cat Part No. ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or equivalent in Bajaj/ Philips or similar make as mentioned in PS)

Supply and fixing in replacement of LED Batten type tube light fitting of 20 watt suitable for surface and wall mounted with polycarbonate and integrated electronic driverincluding twin core twisted flexiable copper conductor cable of size 1 sq mm from connector to ceilling rose complete all as specified and directed. (Make:- Havells Cat Part No. LHEXARP7IN1W020 or equivalent in Bajaj/Phillps or similar make as mentioned in PS)

Supply and Laying XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of 10 Sqmm 2 Core laid in trenches or fixed on wall/floor/poles complete all as specified and directed.

Excavation in trenches n. exc 1.5 mtr width & n. exc 1.5 mtr in depth for taking old unserviceable U/G cable including brick for protection and GI pipes, etc and getting out in hard/dense soil complete all as specified and directed.

Returning filling in trenches including spreading, leveling, watering, and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing excavated materials to a distance n.exc 50mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and directed.

M&L for sand cushioning for UG cables for protection in trenches laying clean dry sand complete all as specified and directed.

Supplying & Laying Sub Class `B’ bricks, old size, kiln burnt, laid with axis of brick perpendicular to the axis of the cable, for protection of cable complete all as specified and directed.

M&L for earthing complete with galvanised steel plate earth electrode of size 60cmx 60cmx6mm thick, burried in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 m below normal ground level, connected with GI wire 4 mm dia earth lead by means of nuts, bolts,check nuts and washers and galvanised iron of steel 15mm bore pipe medium grade for protection connected to main switch board or main control board all as specified and directed including , 20mm dia GI pipe medium grade for watering,funnel with wire mesh, PCC pit with RCC cover including necessary earth work excavation and removal etc in plate No 3 of SSR Part-I 2009 complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coated G1 based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 MP as in roof/ cladding/Velly gutter etc fixed with Self tapping screw complete all as specified and directed.

M/S ABHISHEK JENA