Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.5 LAccepted-AOC 116 JAI BHEEM NAGAR POLIPATHAR GWARIGHAT ROAD JABALPUR MP 482008 | JABALPUR | MADHYA PRADESH | 482008 | L1 | Accepted-AOC L1 bidder lowest | |
| 2 | L2₹47.1 L+₹2.4 L (5.33%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹47.3 L+₹2.6 L (5.79%)Rejected-Finance HOUSE NO E 1 PANCHSHEEL NAGAR NARMADA ROAD JABALPUR MP 482002 | JABALPUR | MADHYA PRADESH | 482002 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹48.9 L+₹4.2 L (9.36%)Rejected-Finance 1257 SCHEME NO 5 NEAR HB COLLEGE VIJAY NAGAR JABALPUR MP PIN 482002 | JABALPUR | MADHYA PRADESH | 482002 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹49.3 L+₹4.6 L (10.3%)Rejected-Finance 129 SITA SADAN ADARSH NAGAR NARMADA ROAD JABALPUR MADHYA PRADESH 482001 | JABALPUR | MADHYA PRADESH | 482001 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
4 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Jabalpur
Garrison Engineer (West) Jabalpur Supply Marg Post Box No. 54 Jabalpur Cantt-482001 (MP)
COMPREHENSIVE REPAIR OTM ACCN IN AREA-II OF AGE B/R-II UNDER GE (WEST) JABALPUR
2022_MES_529568_3
8471/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Jabalpur
As per Tender documents
5 documents required · 5 mandatory
₹500
GE (West) Jabalpur
₹96,000
27 Dec 2022
13 Sept 2022
6 Oct 2022
13 Sept 2022
4 Oct 2022
20 Sept 2022
14 Sept 2022 - 19 Sept 2022
Amount
Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge.
Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel chromium plated fancy type curtain rod with bracket holders for curtain rod 20 mm dia and fixed with screws to pelmet boxes complete all as specified and directed by Engr-in-charge.
S&F in repair double legged door stopper of aluminium alloy with rubber overall length of cover plate 140 mm all as specified and directed by Engr-in-charge.
S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width all as specified and directed by Engr-in-charge.
S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge.
S&F in repair 18/19 mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws as in cupboard shutters & shelves and pelmet boxes etc all as specified and directed by Engr-in-charge.
S&F in repair 25 mm thick block broads grade I quality, exterior grade, commercial type fixed with screws to timber frame work
S&F in repair mild steel helical door spring 300mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge.
S&F in repair mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed by Engr-in-charge.
S&F in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-charge.
S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 200mm complete all as specified and directed by Engr-in-charge.
Ditto all as per above item but length of tower bolt 150 mm all as directed by Engr-in-Charge
S&F in repair mild steel barrel tower bolts stove enameled with bright bolt length of bolt 200mm –ISI marked all as specified.
Ditto all as per above item but length of bolt 150mm all as directed by Engr-in-Charge
S&F in repairs extruded aluminium alloy handles fabricated type 150mm size complete all as directed by Engr-in-Charge
Ditto all as per above item but 100mm size all as directed by Engr-in-Charge
S&F in repair mild steel pressed handles oval type stove enameled black of size 125mm complete all as directed by Engr-in-Charge.
Ditto all as per above item but of size 100 mm all as specified and directed by Engr-in-charge.
S&F in repair 6mm thick ply wood grade BWR type BB fixed with screws to timber frame work all as specified and directed by Engr-in-charge.
S&F in repair plain fillets of 2nd class hard wood square rectangular or triangular section wrought secured with nails sectional area exc 13 and n exc 25 Sqm complete all as specified and directed by Engr-in-charge.
S&F in repair 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge.
S&F in repair 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore bib tap cast copper alloy chromium plated with fancy type crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.
S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge of make:- Jaquar Cat No CON-169KNB or equivalent.
S & F in repair Brass chromium plated bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed of make:- Jaquar Cat No CON-281N or equivalent.
S&F in repair 15mm bore stop valves/ Angle cock chromium plated screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.
S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge.
Ditto all as per above item but length 600mm all as specified and directed by Engr-in-charge.
S & F in repairs Health Faucet size 15 mm chromium plated with flexible tube etc complete all as specified & directed of make Jaquar Cat No ALD-573 or equivalent.
S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge.
S&F in repair waste fitting brass chromium plated 32mm dia for wash hand basin all as specified and directed by Engr-in-charge.
Ditto all as per above item but 40mm dia for sinks all as specified and directed by Engr-in-charge.
M & L for 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete etc all as specified.
S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge.
S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.
S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap and make good to match with the existing surface of floor including provision of lime concrete as required at etc. all as specified and directed by Engr-in-charge.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including connection to out going pipe and flushing pipe complete all as specified and directed by Engr-in-charge.
S&F in repair plastic water closet seat cover, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.
S&F in repairs vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets all as specified and directed by Engr-in-charge.
S&F in repairs vitreous china,coloured, counter top wash hand basin, oval type, size 550x400mm including cutting for and pinning in, but excluding waste pipe etc all complete.
S&F in repairs chromium plated ,teliphonic shower,with CP flexible arms and Jet,of approved make, suitable to fixed to 15mm bore CP angle valves/bath mixer complete all as directed.
S&F in repairs vitreous china,white, padestal suitable for wash hand basin complete all as specified and directed.
S&F in repairs Sheet glass assembly 5.5mm thick sheet glass, corner type, including chromium plated brass screws and wooden/ plastic cleats/plugs .
S&F in repairs 15mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make:- Jandal/ Prakash /TATA
S&F in repairs 25mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make:- Jandal/ Prakash /TATA
S&F in repairs 50mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make:- Jandal/ Prakash /TATA
S&F in repairs 20mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make:- Jandal/ Prakash /TATA
S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls
S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls
S&F in repairs PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 250 Ltr hoisted and fixed in position including 15mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete .(Minimum weight -142 Gms) all as specified and directed by Engr-in-charge.
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete .(Minimum weight -210 Gms) all as specified and directed by Engr-in-charge.
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position including 25mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete .(Minimum weight -455 Gms) all as specified and directed by Engr-in-charge.
Petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-charge.
M & L for tiles cleaning by using appropriate chemical of approved make with using prescribed machine also as necessary to remove stain/ dust etc and maintain beauty of tiles in OTM /MD Accn. Complete all as specified and directed by engr-in-charge. Make : Berger / Asian
S&F in repair 15mm bore bib tap Standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified and directed by Engr-in-charge.
Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-charge.
S & F in repairs Door Seal rubber etc, complete all as specified
S & F in repairs PVC cabinate with mirror etc, complete all as specified. Make : Prayag : (Size : 400 x 500 ) cat No.554 or equivalent in Polytuff, Sintex.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L for Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
Ditto all as per Srl item No 66 above but except brick
Taking down cement plaster or cement lime plaster or wall tiles of any description on bricks or stone walls etc including raking out joints hacking for key scrubbing down with water etc
M&L for 15mm thick plaster in CM 1:4 on brick wall finished even & smooth w/o using extra cement in patches all as specified and directed by Engr-in-charge.
M & L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.
M&L for 40mm thick PCC 1:2:4 type B1 (20mm graded crushed stone aggregate) as in floors finished even & smooth using extra cement in patches all as specified and directed by Engr-in-charge.
M&L for grinding and polishing surfaces of old Kota/marble/granite stone flooring, skirting etc by hand or grinding machine, dusting off the surfaces after grinding, washing and mirror polishing complete all as specified and directed by Engineer in Charge
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust. Etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M & L for Cement concrete type B-0 1:2:4 (12.5mm graded aggregate), 25 mm thick and in floor bedding to receive tiles etc all complete.
Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) over and including screed bed 15mm thick rendering in CM 1:6 all as directed.
M&L for Glazed ceramic tiles 300mmx200mm x 6 to 7 mm thick, on vertical surfaces of walls ( DADO) etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) over and including 10mm thick rendering in CM 1:4 all as directed.
M&L for vetrified ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.
M&L for coloured Glazed ceramic tiles in vertical serfaces 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles.
M&L for Cudappah stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 15mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete
M&L for 20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.
M&L for 18-20mm thick machine cut kota stone slab (table rubbed and polished) as in flooring laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing upto desired satisfaction of Engr In Charge complete all as specfied and directed.
M&L for machine cut kota stone slab 18-20mm thick as in skirting,risers of steps laid over and including 10 mm thick rendering in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete complete all as specfied and directed.
M&L for rendering 15mm thick in CM 1:3 on fair faces of bricks or concrete surfaces in patch work in any location with water proofing compound such as Dr. Fixit Pidicrete URP or equivalent mixed with cement mortar @ 15% by wt of cement over a coat primer mixed in proportion 1:1 (water proofing admixiture:Cement) finished surface even & smooth all as specified. (cost water proofing shall be deemed included in the quoted rates)
Preparing of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of primer etc all complete.
M&L for preparing new plastered surfaces and applying three coats of white wash on walls etc all complete .
M&L for complete two coats of oil bound distemper (acrylic) white or tinted over one coat of chalk whitening/primer including preparation of new plastered surfaces of walls etc all complete .
M&L for PCC (1:2:4) type B-0 (Using 12.50 mm graded stone aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed.
M&L for applying evenly a tack coat of industrial bitumen 85/25 in filling of roof tiles joints includ-ing cleaning surfaces
S&F in repairs 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.
S&F in repairs 40 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.
S & F in repair vitreous china half stall urinal white incl. connection to flushing pipes and out going pipes & brackets etc
S&F in repair urinal spreader chromium plated for fixing with 15 mm bore pipe etc.
S&F in repairs PVC (SWR) vent cowl for 110 mm bore pipe
S&F in repairs PVC (SWR) floor trap with grating 75 mm dia incl jointing with solvent cement
S&F in repairs PVC waste pipe size 32 mm flexible with coupling for WHB/Sink/Urinal etc
S&F in repair CP bras soap tray/dish of approved make etc
Taking down existing aluminium door shutter with frame area exceeding 1 Sqm and re-fixing in same opening after repair/replace Note :- The defective parts (any type of aluminium section) complete. Aluminium parts will be measured and paid separately.
Supply only aluminium anodized snap bead 20mm wide fixing glass with EDP gasket complete as in repair.
supply and fix in repair brass mortice Lock with all fittings for aluminium door
Supply only aluminium handle size & shape as per existing handle for aluminium door or 200 mm long etc.
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.
S&F 12 mm thick prelaminated MDF board interior grade both side decorative choice laminations fixed in aluminium frame work.
Supply only double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. (Make: Hettich/ Sandhu)
Supply only door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (Die cast) body complete all as specified and directed.
Supply only floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed.
S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm of make :- Nirali or equivalent.
S & F in repair sinks made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 495 mm x 420 mm and bowl size 410 mm x 330 mm x 160 mm of make :- Nirali or equivalent.
Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each
Taking down chowket or frame with shutter (without taking of shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each
Taking down chowket or frame area exceeding 1.5 Sq mtr but not exceeding 4.00 Sq mtr each
Taking down Shutter not exc1 sqm each
Taking down Shutter exc 1 sqm and n.exc 2 Sqm each
Takingdown wooden shutters of any description n. exc 1.00 sqm each and refixing the same opening after repairing excluding iron mongry.
Takingdown wooden shutters of any description exc 1.00sqm but n exc 2.00sqm each and refixing the same opening after repairing excluding iron mongry.
S&F pressed steel frames of 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.
S&F pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.
S&F second class HW plain, solid, straight chowkates and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints
S&F anodised aluminum frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification
S&F anodised aluminum door shutters, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F anodised aluminum window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S & F factory made 100% Solid Wood plastic composite (WPC) Door frame 90mm x 45mm made from wood plastic composite (Single Extruded Process) material with density 780Kg/Cbm etc all as per specification drawings and as directed by the Engineer-in-Charge Door should be water proof, Termite Proof, Fire Retardant & having good screw holding capacity including making good to the disturbed surfaces complete
S & F SOLID PVC DOUBLE DOOR FRAME (CHOUKHAT) of size 120mm x 50mm with a wall thickness of 5mm (+0.25mm), made out of extruded 5mm (+0.25) mm thick PVC Sheet of density 600Kg/Cbm manufactured by an ISO 9001 - 2015 certified company and by joining 3 Nos. heat mouleded PVC Sections. The hinge section of size 35 x 35mm shall be made from plain colour PVC Sheet of 5mm (+0.25) thichness. The inside section will be covered with 5mm thich PVC sheet 'C' shape covering section of size 120mm x 50mm. At center top position 5mm (+0.25) thick 50x50x50mm pattam section should be pasted with solvent cement adhesive to make double pattam of frame. The frame shall be mitre cur at to corners & jointed with 4 Nos of 150mm long 'L' brackets of 19x19mm MS sq Tubeor fusion heat welding process. The two vertical doors frames are to be reinforced with 25x25mm MS sq Tube of 19 guge throughout the frame. The door frame shall be fixed to the wall using 8/100 mm fishcher screws. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc. including making good to the disturbed surfaces complete as per manufacturer's specification & direction of Engineer-in-charge
S&F 30mm thick FACTORY MADE MOULDED DOOR SHUTTER- WOOD FREE consisting of frame made out of M.S. Tubes of 19guage thickness and size of 20mm X 40mm for stiles as well as top, bottom & lock rail. M.S. Frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick mutlichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/cynoacrylate adhesive with 5mm thick moulded PVC sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on oe side of the inside panel. 5mm plain/prelam PVC sheet to be pasted using solvent cement/cynoacrylate adhesive on other side of the Hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (made by sticking 2 Nos. rigid foam PVC sheets of 5mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC link of matching colours of plain/prelam moulded PVC Sheet of door. 20mm thick (5mm x 4nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3nos. stainless steel butt hinges of size 100mm*25mm*2mm and 50mm long steel screws drilled suitable to pass through both the wall of the M.S. tube other hardware should be fixed with 25mm*8mm size steel screws etc. including making good to the disturbed surfaces complete as per direction of Engineer-in-charge, manufacture's specification and drawing.
S&F 30mm thick FACTORY MADE WIRE MESH SOLID PVC DOOR SHUTTER consisting of frame made out of M.S. Tubes of 19 guage thickness and size of 19mm X 19mm for stiles and 15mm X 15MM for top, bottom & lock rail. M.S. Frame shall have a coat of metal primer of approved make & manufacturer. 19mm x 19mm M.S. squqre tubes shell be covered with heat moulded plain sheet 'C' channel made from 5 mm (+0.25) thik PVC sheet of density 6 KG/Cbm Manufactured by an ISO-9001-2015 certified Company, of size 30 mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be bent in 90o angle on either side forming stiles, one of the 90o bend edge is cut from stiles as well as rails to nail from inner side of door to hide wiremesh fixing steel screws. 5mm (+0.25)thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on both side to form lock rail. An additional 5mm (+0.25) thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive. Panel will be of /gi/SS wiremesh of 24 gauge to be fitted inside area of stiles & rails. The wiremesh in top, bottom & rock rail is sealed with 15mm X15mm tube with steel screw of size 13/6mm. 10mm (5mm x 2 Nos) thick PVC strip of 25mm width is to be stuck & nails on both side of GI wiremesh interior at the top, bottom & rock rail. 10mm thick (5mm x 2nos) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screw drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6mm size steel screw etc. including making good to the disturbed surfaces complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.
S&F steel windows with side hung shutters incl box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed
S&F steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed
S&F steel ventilator with top hung shutter including hinges steel peg stay complete
S&F in repairs framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe 410-0 or Fe 310-0
M&L for applying two coat of synthetic enamel pinting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth etc all complete.
S&F galvanised MS wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples
S&F 35 mm thick Plain framed factory made pannel door shutter ( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS 1003 ( Part-I) , kiln seasoned and chemically pressure treated.
S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, etc all complete.
S&F 30mm thick factory made second class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc divided into squares with plain chamfered or roundded mitred and rebated sash bars any numbers and fitted to chowkates
S&F 100 mm long aluminium butt hinges alloy with galvanised ms hinge pin, anofised and fixed type C-21
S&F 150mm long aluminium anodised barrel tower bolt and fixed
S&F 125mm long aluminium anodised handle cast type and fixed
S&F 100mm long butt hinges med wt cold rolled mild steel and fixed
S&F 65mm long butt hinges med wt cold rolled mild steel and fixed
S&F 150mm long MS barrel tower bolts, stove enamelled black with bright bolt and fixed
S&F 125mm long MS pressed handles oval type stove enamelled black
S&F 300mm long MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
S&F 2nd class HW Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each
M&L for applying two coat of synthetic enamel painting over a coat of pink primer including preparation of new wooden surface over 10 cm width or girth all as specified and directed.
Dismantling of asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
S&F Pre-painted galvalume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified
Dismantling of timber scantlings unframed 40SqCm and over in section, in any position
S&F FI 40 x 6mm as in wind tie fixed with self tapping screwes all as specified and directed
M&L 2nd class hard wood in scantling, clean sawn, timber framed and fixed.
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters, fixed with angle cleats or other connecting plates of Gde fe 410-0 or fe 250-0
M&L for Welding in repairs n. exc 2.5cm in length complete all as specified and directed.
Supply only angle Iron / MS plate / MS sheet for welding where ever required for repair work.
Complete removal of existing treatment on walls including steel wire brushing and scraping mechanically using wall scraper etc complete and applying a layer of Birla wall care putty including rubbing, levelling and preparing the surfaces for receiving further finishes and applying two coats of oil bound distemper all as specified and directed.
M&L for preparation of old wall surfaces including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spots and applying one coat of cement based paint etc all complete.
M&L for preparation of old wall surfaces including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying one coat of white wash etc all complete.
M&L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying one coat of white wash etc all complete.
M&L for preparation of old surfaces of wall and applying one coat of distemper Oil emulsion white or tinted etc all complete.
M&L for applying subsequent coat of distemper oil emulsion white or tinted over one coat applied under above item etc all complete.
M&L for applying one coat of synthetic enamel paint on old decorated wooden surfaces over 10cm width or girth including preparation of surfaces etc all complete.
M&L for applying one coat of weather proof emulsion on old treated surfaces of white or tinted as directed by Engr in charge Make:- Apex from Asian paints or equivalent in Berger paint.
M&L for applying two coat of weather proof emulsion on prepared surfaces including complete removal existing treatment on walls using mechanical scrapper of white or tinted as directed by Engr in charge Make:- Apex from Asian paints or equivalent in Berger paint.
M&L for applying one coat of synthetic enamel paint on old decorative surfaces of steel over 10cm width or girth including preparation of surfaces etc all complete.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed.
S&F suspended false ceilingwith T- grid system of size 600 x 600mm with following specifiactions :- (i) Pre primed, self embossed, textured designer board, water resistant, termite resistant, fire resistant for insulation Calcium Silicate Boards 4mm thick (ii) GI powder coated Main Tee of size 38x24mm made out of 0.30 mm (min) thk sheet (ii) GI powder coated Cross Tee of size 24x24x0.30 mm (min) made out of 0.30 mm (min) thick sheet (iii) GI powder coated angle of size 24x24x0.30 mm (min) made out of 0.30 mm (min) thick sheet (iv) Level clip / suspension wire - 4 mm dia GI wire. (v) Soffit cleat/Rawl Plug as per manufacturers instrcutions (vi) Fixing shall be executed as per manufacturers instructions
Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 250 m.
M&L for wire brushing and cleaning top surface of tiles,lime terracing or cement concrete,including flashing and junction of parapet,etc,and surface painting with a layer of blown bitumen of any penetration applied hot @1.70 kg per sqm.blinded with grit or pea size gravel @ 0.006 cu.m per sqm and lightly tampered (area of flashing etc.shall be added to the roof area.
M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.
M&L for Providing water proofing treatment over cleaned roof surface (work to be executed is in Patches in different numbers of buildings) with super thermo APP modified water proofing memberane comprising of the following for roofs (- (a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. (b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. (c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame.
M&L for applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.
S&F cement concrete tiles size 25cmx25cmx22mm thick machine cut pressed set jointed and pointed in neat cement slurry with grey cement and pigments in floors and cut and polished fixced over and including 15mm thick cm 1:4 etc complete all as specified and directed
M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces
Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and directed.Note :- Galvanised steel wire netting shall be measured and paid under relevent items
S&F galvanised steel wire of mesh in size 12mm ,1.4 mm nominal dia of wire and fixed with tinned tack ,or galvanised wire staples.
S&F galvanised steel wire of mesh in size 12mm ,1.4 mm nominal dia of wire and fixed with tinned tack ,or galvanised wire staples.
mandeka constructions
ELITE ENGINEERING COMPANY
Sachdeva Enterprises
M/S SACHIN AGARWAL
DEEPAK CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .